Hostname: page-component-848d4c4894-tn8tq Total loading time: 0 Render date: 2024-07-03T11:42:15.938Z Has data issue: false hasContentIssue false
  • English
  • Français

Adsorption and Acidic Properties of Clays Pillared With Oxide Sols

Published online by Cambridge University Press:  28 February 2011

S. Yamanaka ,
T. Nishihara  and
M. Hattori
S. Yamanaka
Affiliation:
Department of Applied Chemistry, Faculty of Engineering, Hiroshima University, Higachi- iroshima 724, Japan
T. Nishihara
Affiliation:
Department of Applied Chemistry, Faculty of Engineering, Hiroshima University, Higachi- iroshima 724, Japan
M. Hattori
Affiliation:
Department of Applied Chemistry, Faculty of Engineering, Hiroshima University, Higachi- iroshima 724, Japan
Get access

Abstract

Interlayers of montmorillonite were pillared with TiO2, SiO2 -TiO2 and SiO2-Fe2O3 sols. The pillared structures were thermally stable at least up to 500°C and retained unusually large basal spacings in the range of 24–45Å and surface areas as high as 300–500 m2 /g. The TiO2 pillared clay showed Type IV adsorption isotherm for nitrogen. Although SiO2 -TiO2 and SiO2-Fe2O3 pillared clays had basal spacings much larger than that of TiO2 pillared clay, these mixed oxide pillared clays had small pores and exhibited Type I isotherm. The acidic strength distributions were determined by a titration method using n-butylamine and Hammett indicators. All of the pillared clays had large acidities, but the acidic strength decreased in the following order: TiO2 - SiO 2 » SiO2-Fe2O3 pillared clays. Temperature-programmed desorption (TPD) spectra of ammonia were measured and interpreted in relation to the acidity distribution. Infrared spectra of pyridine adsorbed on TiO2 pillared clay indicated that the acidity predominantly arises from Lewis acid sites.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 111: Symposium O – Microstructure and Properties of Catalysts , 1987 , 283
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Brindly, G.W. and Sempels, R.E., Clay Miner. 12, 229 (1977).Google Scholar
2. Yamanaka, S. and Brindly, G.W., Clays Clay Miner. Z 7, 119 (1979).Google Scholar
3. Pinnavaia, T.J., Tzou, M.-S., Landau, S.D., and Raythatha, R.H., J. Mol. Catal. Z 71, 95 (1984).Google Scholar
4. Schutz, A., Stone, W.E., Poncelet, G., and Fripiat, J.J., Clays Clay Miner. 35, 251 (1987).Google Scholar
5. Occelli, M.L., J. Mol. Catal. 35, 377 (1986).Google Scholar
6. Schutz, A., Plee, D., Borg, F., Jacobs, P., Poncelet, G., and Fripiat, J.J., in Proc. Int. Clay Conf.,Denver, 1985, edited by Schultz, L.G., van Olphen, H., and Mumpton, F.A. (The Clay Minerals Society) pp. 305.Google Scholar
7. Pinnavaia, T.J., Science 220, 365 (1983).Google Scholar
8. Yamanaka, S., Nishihara, T., and Hattori, M., Mat. Chem. Phys. 17, 87 (1987).Google Scholar
9. Yamanaka, S., Okumura, F., and Hattori, M., Extended Abstracts of the 1986 Annual Meeting of the Ceramic Society of Japan, 1 F07.Google Scholar
10. Benesi, H., J. Phys. Chem. 16, 970 (1957).Google Scholar
11. Parry, E.P., J. Catal. 2, 371 (1963).Google Scholar
12. Itoh, M., Hattori, H., and Tanabe, K., J. Catal., 35, 225 (1974).Google Scholar
13. Tanabe, T., Sumiyoshi, T., Shibata, K., Kiyoura, T., and Kitagama, J., Bull. Chem. Soc. Jpn. 47 1064 (1974).Google Scholar
14. Yamaguchi, T., Jin, T., Ishida, T., and Tanabe, K., Mat. Chem. Phys. 17, 3 (1987).Google Scholar