Hostname: page-component-8448b6f56d-t5pn6 Total loading time: 0 Render date: 2024-04-20T03:02:34.568Z Has data issue: false hasContentIssue false
  • English
  • Français

The Formation of Water Marks on Both Hydrophilic and Hydrophobic Wafers

Published online by Cambridge University Press:  10 February 2011

Jin-Goo Park ,
Jeung-Hoon Han ,
Seung-Hwan Kim  and
Sang-Ho Lee
Jin-Goo Park
Affiliation:
Department of Metallurgy and Materials Engineering, Hanyang University, Ansan, 425–791, Korea
Jeung-Hoon Han
Affiliation:
Department of Metallurgy and Materials Engineering, Hanyang University, Ansan, 425–791, Korea
Seung-Hwan Kim
Affiliation:
Department of Metallurgy and Materials Engineering, Hanyang University, Ansan, 425–791, Korea
Sang-Ho Lee
Affiliation:
Department of Metallurgy and Materials Engineering, Hanyang University, Ansan, 425–791, Korea
Get access

Abstract

The purpose of this paper is to explore the formation of water residues on wafers during drying. To investigate this DI water droplets were intentionally placed on the surface of substrates with various wettabilities and then left to dry in both N2 and O2 atmospheres. It was found that both hydrophobic and hydrophilic surfaces created the water mark in N2 and O2. The size and dry time of residues were dependent on the wettability of surfaces. Auger analysis of residues showed that the oxidation of surface in water might be one of causes of water mark formation. Considering the pore size of final filters in DI water generation is 0.05 μn, a large number of particles less than 0.05 μm ay be in DI water. In order to investigate the effect of small particles less than 0.05 μm on water mark formation, PSL particles less than 0.05 μm were added to DI water. DI water containing particles was left to dry as a function of particle concentrations. The size of water marks was dependent on the concentration of particles in DI water after they reached a critical concentration.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 477 , 1997 , 513
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kem, W. and Puotinen, D. A.: RCA Review, 31, p. 187 (1970)Google Scholar
2. Park, J. -G. and Raghavan, S.: Adhesion, J. Sci. Tech.,7, p. 179 (1993)Google Scholar
3. Burrows, V. A., Chabal, Y. J., Higashi, G. S., Raghavachari, K., and Christman, S. B.: Appl. Phys. Lett., 53, p. 998 (1988)CrossRefGoogle Scholar
4. Menon, V. B., Michaels, L. D., Clayton, A. C., and Donovan, R. P.: Solid State Technology, 32, p. S9 (1989)Google Scholar
5. Watanabe, M., Hamano, M. and Harazono, M.: Mats. Sci. Eng., B4, p. 401 (1989)CrossRefGoogle Scholar
6. Park, J. -G. and Pas, M.: J. Electrochem. Soc., 142, p. 2028 (1995)CrossRefGoogle Scholar
7. Dimitrov, S., Dushkin, C. D., Yoshimura, H. and Nagayama, K., Langmuir, 10, p. 432 (1994)CrossRefGoogle Scholar
8. Adachi, A., Dimitrov, S. and Nagayama, K., Langmuir, 11, p. 1057 (1995)CrossRefGoogle Scholar
9. Stephen, H. and Stephen, T., Solubility of Inorganic and Organic Compounds, vol.1 (1963)Google Scholar