Hostname: page-component-5c6d5d7d68-wpx84 Total loading time: 0 Render date: 2024-08-18T16:51:45.346Z Has data issue: false hasContentIssue false

A fully flexible, high gain saw-tooth-shaped boundary fractal wearable patch antenna for WBAN applications

Published online by Cambridge University Press:  15 July 2022

Sandhya Mallavarapu*
Affiliation:
Department of Electronics & Communications Engineering, National Institute of Technology Warangal, Warangal 506004, Telangana, India
Anjaneyulu Lokam
Affiliation:
Department of Electronics & Communications Engineering, National Institute of Technology Warangal, Warangal 506004, Telangana, India
*
Author for correspondence: Sandhya Mallavarapu, E-mail: sandhyamallavarapu@student.nitw.ac.in

Abstract

A flexible and high gain saw-tooth-shaped boundary fractal wearable antenna is anticipated for WBAN applications. A square shape is converted to the saw-tooth-shaped boundary by sequentially rotating the square at an angle of 45° and overlaid on one another and repeated the same for three iterations. The geometry is built on a flexible jeans substrate, and the total size of the anticipated antenna is 0.583λ × 0.583λ × 0.02λ at 2.4 GHz. A prototype has been made to test its suitability for wearable applications' gain, bandwidth, and efficiency. The results revealed that the proposed antenna provides an impedance bandwidth of 4.2% and a peak gain of 5.76 dBi at the 2.45 GHz ISM band. The anticipated antenna is wrapped around foam cylinders of radii 70 and 50 mm to test the stability and deformability of its performance. The full ground plane isolates the antenna from the human body contributing to the lower SAR values. The simulated maximum achieved specific absorption rate (SAR) of 0.3025 and 1.16 W/kg for 10 and 1 g of average tissue for the input power of 100 mW, respectively, found within the standards as per FCC. The peak gain, compact size, and SAR permanence made the anticipated antenna a worthy candidate for wearable on/off body applications.

Type
Antenna Design, Modeling and Measurements
Copyright
© The Author(s), 2022. Published by Cambridge University Press in association with the European Microwave Association

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Dayo, ZA, Cao, Q, Wang, Y, Rahman, SU and Soothar, P (2019) A compact broadband antenna for civil and military wireless communication applications. International Journal of Advanced Computer Science and Applications 10, 3944.CrossRefGoogle Scholar
Mahmood, SN, Ishak, AJ, Saeidi, T, Alsariera, H, Alani, S, Ismail, A and Soh, AC (2020) Recent advances in wearable antenna technologies: a review. Progress in Electromagnetics Research B 89, 127.CrossRefGoogle Scholar
Karthikeyan, S, Gopal, YV, Kumar, VGN and Ravi, T (2019) Design and analysis of wearable antenna for wireless body area network. In IOP Conference Series: Materials Science and Engineering, 590, p. 012022, IOP publishing, Tamil Nadu, India.CrossRefGoogle Scholar
Mallavarapu, S and Lokam, A (2021) A critical survey on fractal wearable antennas with enhanced gain and bandwidth for WBAN. In Ranganathan, G, Chen, J and Rocha, A (eds), Inventive Communication and Computational Technologies. Singapore: Springer, pp. 737745.CrossRefGoogle Scholar
Hertleer, C, Rogier, H, Vallozzi, L and Van Langenhove, L (2009) A textile antenna for off-body communication integrated into protective clothing for firefighters. IEEE Transactions on Antennas and Propagation 57, 919925.CrossRefGoogle Scholar
Hossain, AZ, Hassim, NB, Azam, SK, Islam, MS and Hasan, MK (2020) A planar antenna on flexible substrate for future 5g energy harvesting in Malaysia. International Journal of Advanced Computer Science and Applications 11, 151155.CrossRefGoogle Scholar
Dar, SH, Ahmed, J and Raees, M (2016) Characterizations of flexible wearable antenna based on rubber substrate. International Journal of Advanced Computer Science and Applications 7, 190195.Google Scholar
Naji, DK (2020) Miniature slotted semi-circular dual-band antenna for WiMAX and WLAN applications. Journal of Electromagnetic Engineering and Science 20, 115124.CrossRefGoogle Scholar
Mazen, K, Emran, A, Shalaby, AS and Yahya, A (2021) Design of multi-band microstrip patch antennas for mid-band 5G wireless communication. International Journal of Advanced Computer Science and Applications 12, 459469.CrossRefGoogle Scholar
Anguera, J, Andújar, A, Jayasinghe, J, Chakravarthy, VS, Chowdary, PSR, Pijoan, JL, Ali, T and Cattani, C (2020) Fractal antennas: an historical perspective. Fractal and Fractional 4, 126.CrossRefGoogle Scholar
Arif, A, Zubair, M, Ali, M, Khan, MU and Mehmood, MQ (2019) A compact, low-profile fractal antenna for wearable on-body WBAN applications. IEEE Antennas and Wireless Propagation Letters 18, 981985.CrossRefGoogle Scholar
Chitra, RJ, Nagarajan, V and Mukesh, D (2020) Design of wearable pentagonal fractal antenna for soldier location tracking. In 2020 International Conference on Communication and Signal Processing (ICCSP). IEEE, Melmaruvathur, India.CrossRefGoogle Scholar
Le, TT and Yun, TY (2020) Miniaturization of a dual-band wearable antenna for WBAN applications. IEEE Antennas and Wireless Propagation Letters 19, 14521456.CrossRefGoogle Scholar
Ashraf, J, Jabbar, A, Arif, A, Riaz, K, Zubair, M and Mehmood, MQ (2021) A textile based wideband wearable antenna. In 2021 International Bhurban Conference on Applied Sciences and Technologies (IBCAST). IEEE, Islamabad, Pakistan, pp. 938–941.CrossRefGoogle Scholar
Muktadir, MA, Nesar, MSB, Chakma, N, Biswas, A, Chowdhury, P and Hossain, MA (2018) A sawtooth shaped CPW fed UWB microstrip patch antenna for biotelemetry applications. In 2018 International Conference on Innovations in Science, Engineering and Technology (ICISET), Chittagong, Bangladesh. IEEE.Google Scholar
Ali Khan, MU, Raad, R, Tubbal, F, Theoharis, PI, Liu, S and Foroughi, J (2021) Bending analysis of polymer-based flexible antennas for wearable, general IoT applications: a review. Polymers 13, 357.CrossRefGoogle ScholarPubMed
Boeykens, F, Vallozzi, L and Rogier, H (2012) Cylindrical bending of deformable textile rectangular patch antennas. International Journal of Antennas and Propagation 2012, 111.CrossRefGoogle Scholar
Zhou, L, Fang, SJ and Jia, X. (2020) A compact dual-band and dual-polarized antenna integrated into textile for WBAN dual-mode applications. Progress In Electromagnetics Research Letters 91, 153161.CrossRefGoogle Scholar
Mandal, D and Pattnaik, SS (2019) Wide CPW-fed multiband wearable monopole antenna with extended grounds for GSM/WLAN/WiMAX applications. International Journal of Antennas and Propagation 2019, 115.CrossRefGoogle Scholar
Seman, FC, Ramadhan, F, Ishak, NS, Yuwono, R, Abidin, ZZ, Dahlan, SH, Shah, SM and Ashyap, AYI (2019) Performance evaluation of a star-shaped patch antenna on polyimide film under various bending conditions for wearable applications. Progress in Electromagnetics Research Letters 85, 125130.CrossRefGoogle Scholar
Yang, HL, Yao, W, Yi, Y, Huang, X, Wu, S and Xiao, B (2016) A dual-band low-profile metasurface-enabled wearable antenna for WLAN devices. Progress in Electromagnetics Research C 61, 115125.CrossRefGoogle Scholar
Garg, R, Bhartia, P, Bahl, IJ and Ittipiboon, A (2001) Microstrip Antenna Design Handbook. Artech House, Boston, London.Google Scholar
Ashyap, AY, Abidin, ZZ, Dahlan, SH, Majid, HA, Shah, SM, Kamarudin, MR and Alomainy, A (2017) Compact and low-profile textile EBG-based antenna for wearable medical applications. IEEE Antennas and Wireless Propagation Letters 16, 25502553.CrossRefGoogle Scholar
Jiang, ZH, Brocker, DE, Sieber, PE and Werner, DH (2014) A compact, low-profile metasurface-enabled antenna for wearable medical body-area network devices. IEEE Transactions on Antennas and Propagation 62, 40214030.CrossRefGoogle Scholar
Le, TT, Kim, YD and Yun, TY (2021) A triple-band dual-open-ring high-gain high-efficiency antenna for wearable applications. IEEE Access 9, 118435118442.CrossRefGoogle Scholar
Khajeh-Khalili, F, Shahriari, A and Haghshenas, F (2021) A simple method to simultaneously increase the gain and bandwidth of wearable antennas for application in medical/communications systems. International Journal of Microwave and Wireless Technologies 13, 374380.CrossRefGoogle Scholar
Smida, A, Iqbal, A, Alazemi, AJ, Waly, MI, Ghayoula, R and Kim, S (2020) Wideband wearable antenna for biomedical telemetry applications. IEEE Access 8, 1568715694.CrossRefGoogle Scholar
Simorangkir, RB, Yang, Y, Matekovits, L and Esselle, KP (2016) Dual-band dual-mode textile antenna on PDMS substrate for body-centric communications. IEEE Antennas and Wireless Propagation Letters 16, 677680.CrossRefGoogle Scholar
Wang, Y, Bao, J, Tian, Y, Wang, Z and Li, N (2021) Design of high gain wearable antenna based on wireless body area network communications. In Journal of Physics: Conference Series 1971, IOP Publishing, Dali, China.CrossRefGoogle Scholar
Joshi, MP, Gond, VJ and Chopade, JJ (2020) Saw-tooth shaped sequentially rotated fractal boundary square microstrip patch antenna for wireless application. Progress in Electromagnetics Research Letters 94, 109115.CrossRefGoogle Scholar
Mishra, R, Dandotiya, R, Kapoor, A and Kumar, P (2021) Compact high gain multiband antenna based on split ring resonator and inverted F slots for 5G industry applications. The Applied Computational Electromagnetics Society Journal (ACES) 36, 9991007.CrossRefGoogle Scholar
Gao, GP, Hu, B, Wang, SF and Yang, C (2018) Wearable circular ring slot antenna with EBG structure for wireless body area network. IEEE Antennas and Wireless Propagation Letters 17, 434437.CrossRefGoogle Scholar
Joshi, R, Hussin, EFNM, Soh, PJ, Jamlos, MF, Lago, H, Al-Hadi, AA and Podilchak, SK (2020) Dual-band, dual-sense textile antenna with AMC backing for localization using GPS and WBAN/WLAN. IEEE Access 8, 8946889478.CrossRefGoogle Scholar