Hostname: page-component-8448b6f56d-cfpbc Total loading time: 0 Render date: 2024-04-19T08:08:27.267Z Has data issue: false hasContentIssue false
  • English
  • Français

A fractal quad-band antenna loaded with L-shaped slot and metamaterial for wireless applications

Published online by Cambridge University Press:  05 March 2018

Tanweer Ali Open the ORCID record for Tanweer Ali [Opens in a new window] ,
Mohammad Saadh Aw  and
Rajashekhar C. Biradar
Tanweer Ali*
Affiliation:
School of ECE, REVA University, Bangalore, 560064, India
Mohammad Saadh Aw
Affiliation:
School of ECE, REVA University, Bangalore, 560064, India
Rajashekhar C. Biradar
Affiliation:
School of ECE, REVA University, Bangalore, 560064, India
*
Author for correspondence: Tanweer Ali, E-mail: tanweers@reva.edu.in
Get access Rights & Permissions [Opens in a new window]

Abstract

A novel concept of using fractal antenna with metamaterial and slot to achieve multiband operation is investigated. The antenna consists of an L-shaped slot, Sierpinski triangle (used as fractal) as the radiating part and metamaterial circular split ring resonator (SRR) as the ground plane. The introduction of metamaterial in the ground plane makes the antenna operate at 3.3 GHz (middle WiMAX). The etching of Sierpinski triangle and L-shaped slot in the radiating monopole perturbs the surface current distribution; thereby increasing the total current path length which tends the antenna to further operate at 5.5 (upper WiMAX), 7.3 (satellite TV) and 9.9 GHz (X-band), respectively. The extraction of medium parameter of a circular SRR through waveguide medium is discussed in detail. The antenna has a compact dimension of 0.33λ0 × 0.27λ0 × 0.01λ0 = 30 mm × 24.8 mm × 1.6 mm, at a lower frequency of 3.3 GHz. Under simulation, antenna operates at 3.3, 5.5, 7.3 and 9.9 GHz with S11 < −10 dB bandwidth of about 5.9% (3.24–3.44 GHz), 5.6% (5.31–5.62 GHz), 7.3% (6.99–7.52 GHz) and 3.02% (9.78–10.08 GHz), respectively. In measurement, antenna exhibit resonances at 3.1, 5.52, 7.31, 9.72 GHz with S11 < −10 dB bandwidth of about 3.5% (3.04–3.15 GHz), 5.01% (5.44–5.72 GHz), 13.2% (6.76–7.72 GHz) and 5.77% (9.42–9.98 GHz), respectively. Good impedance matching and stable radiation characteristics are observed across the operational bandwidth of the proposed configuration.

Keywords

Circular SRRfractalL-slotmultiband
Type
Research Papers
Information
International Journal of Microwave and Wireless Technologies , Volume 10 , Special Issue 7: Electronic Warfare , September 2018 , pp. 826 - 834
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1]Sarkar, D, Saurav, K and Srivastava, KV (2014) Multi-band microstrip fed slot antenna loaded with split-ring resonator. Electron Letters 50, 1498–1500.Google Scholar
[2]Elsheakh, DM, Elsadek, N, Abdallah, HA, Iskander, EAF and El-Hennawy, MF (2010) Reconfigurable single and multiband inset feed microstrip patch antenna for wireless communication devices. Progress in Electromagnetic Research C 12, 191–201.Google Scholar
[3]Bakariya, PS, Dwari, S, Sarkar, M and Mandal, MK (2015) Proximity-coupled microstrip antenna for bluetooth, WiMAX and WLAN applications. IEEE Antennas Wireless Propag Letters 14, 755–758.Google Scholar
[4]Wu, RZ, Wang, P, Zheng, Q and Li, RP (2015) Compact CPW-fed triple-band antenna for diversity applications. Electron Letters 51, 735–736.Google Scholar
[5]Mehdipour, A, Sebak, AR, Trueman, CW and Denidni, TA (2012) Compact multiband planar antenna for 2.4/3.5/5.2/5.8-GHz wireless applications. IEEE Antennas Wireless Propag Letters 11, 144–147.Google Scholar
[6]Wang, H and Zheng, M (2011) An internal triple-band WLAN antenna. IEEE Antennas Wireless Propag Letters 10, 569–572.Google Scholar
[7]Ali, T, Pathan, S and Biradar, RC (2018) A multiband antenna loaded with metamaterial and slots for GPS/WLAN/WiMAX applications. Microwave and Optical Technology Letters 60, 79–85.Google Scholar
[8]Anguera, J, Puente, C, Borja, C and Soler, J (2005) Fractal Shaped Antennas: A Review. Encyclopedia of RF and Microwave Engineering. Wiley Interscience. http://dx.doi.org/10.1002/0471654507.eme128Google Scholar
[9]Chen, HD, Yang, HW and Sim, CYD (2017) Single open-slot antenna for LTE/WWAN smartphone application. IEEE Transactions on Antennas and Propagation 65(8), 4278–4282.Google Scholar
[10]Lee, SH, Lim, Y, Yoon, YJ, Hong, CB and Kim, HI (2010) Multiband folded slot antenna with reduced hand effect for handsets. IEEE Antennas Wireless Propagation Letters 9, 674–677.Google Scholar
[11]Yuan, B, Cao, Y and Wang, G (2011) A miniaturized printed slot antenna for six-band operation of mobile handsets. IEEE Antennas Wireless Propagation Letters 10, 854–857.Google Scholar
[12]Sharma, SK, Mulchandani, JD, Gupta, D and Chaudhary, RK (2015) Triple band metamaterial inspired antenna using FDTD technique for WLAN/WiMAX applications. International Journal of RF and Microwave Computer Aided Engineering 25(8), 688–695.Google Scholar
[13]Ali, T and Biradar, RC (2017) A compact multiband antenna using λ/4 rectangular stub loaded with metamaterial for IEEE 802.11 N and IEEE 802.16 E. Microwave and Optical Technology Letters 59(5), 1000–1006.Google Scholar
[14]Kukreja, J, Kumar Choudhary, D and Kumar Chaudhary, R (2017) CPW fed miniaturized dual-band short-ended metamaterial antenna using modified split-ring resonator for wireless application. International Journal of RF and Microwave Computer-Aided Engineering 27(8), 1–7.Google Scholar
[15]Wen, R (2013) Compact planar triple-band monopole antennas based on a single-loop resonator. Electronics Letters 49(15), 916–918.Google Scholar
[16]Liu, P, Zou, Y, Xie, B, Liu, X and Sun, B (2012) Compact CPW-fed tri-band printed antenna with meandering split-ring slot for WLAN/WiMAX applications. IEEE Antennas and Wireless Propagation Letters 11, 1242–1244.Google Scholar
[17]Teng, XY, Zhang, XM, Li, Y, Yang, ZX, Liu, DC and Dai, QF (2012) A compact triple-band printed monopole antenna for WLAN/WiMAX applications. In 2012 10th International Symposium on Antennas, Propagation & EM Theory (ISAPE), Vol. 82. IEEE, pp. 140–143.Google Scholar
[18]Li, L, Zhang, X, Yin, X and Zhou, L (2016) A compact triple-band printed monopole antenna for WLAN/WiMAX applications. IEEE Antennas and Wireless Propagation Letters 15, 1853–1855.Google Scholar
[19]Rajabloo, H, Kooshki, VA and Oraizi, H (2017) Compact microstrip fractal Koch slot antenna with ELC coupling load for triple band application. AEU – International Journal of Electronics and Communications 73, 144–149.Google Scholar
[20]Vinodha, E and Raghavan, S (2017) Double stub microstrip fed two element Rectangular Dielectric Resonator Antenna for multiband operation. AEU-International Journal of Electronics and Communications 78, 46–53.Google Scholar
[21]Ali, T and Biradar, RC (2017) A compact hexagonal slot dual band frequency reconfigurable antenna for WLAN applications. Microwave and Optical Technology Letters 59(4), 958–964.Google Scholar
[22]Balanis, CA (2005) Antenna theory: analysis and design. Hoboken, NJ: Wiley Interscience.Google Scholar
[23]Ali, T, Mohammad Saadh, AW, Biradar, RC, Anguera, J and Andujar, A (2017) A miniaturized metamaterial slot antenna for wireless applications. AEU-International Journal of Electronics and Communications 82, 368–382.Google Scholar
[24]Saha, C and Siddiqui, JY (2011) Versatile CAD formulation for estimation of the resonant frequency and magnetic polarizability of circular split ring resonators. International Journal of RF and Microwave Computer-Aided Engineering 21(4), 432–438.Google Scholar
[25]Smith, DR, Schultz, S, Markoš, P and Soukoulis, CM (2002) Determination of effective permittivity and permeability of metamaterials from reflection and transmission coefficients. Physical Review B 65(19), 195104 (1–5).Google Scholar