Hostname: page-component-77c89778f8-n9wrp Total loading time: 0 Render date: 2024-07-20T07:18:32.987Z Has data issue: false hasContentIssue false

Compact high-efficiency pentahedron and quatrefoil shape antennas with enhanced gain for GSM1800, 3G, 4G-LTE energy harvesting applications

Published online by Cambridge University Press:  29 May 2020

Geriki Polaiah*
Affiliation:
Department of Electronics and Communication Engineering, National Institute of Technology Karnataka Surathkal, Mangalore575025, India
K. Krishnamoorthy
Affiliation:
Department of Electronics and Communication Engineering, National Institute of Technology Karnataka Surathkal, Mangalore575025, India
Muralidhar Kulkarni
Affiliation:
Department of Electronics and Communication Engineering, National Institute of Technology Karnataka Surathkal, Mangalore575025, India
*
Author for correspondence: Geriki Polaiah, E-mail: polaiahgeriki@gmail.com

Abstract

In this paper, three compact, high-efficiency, gain enhanced antennas, and corresponding rectifiers have been proposed for GSM1800, 3G, and 4G-LTE energy harvesting applications. The inverted L-stub is placed on the ground plane of the monopole antenna to get the desired frequency band of GSM1800 MHz. The feed length variation method has been adopted for the slot antennas to obtain the required frequency of 3G and 4G-LTE cellular bands. The performance of antennas is analyzed with the inverted L-stub, feed length variation, and the reflector distance. The maximum gain achieved with the reflector positioned at a distance of λ/4 from the antenna backside is three times greater than the gain obtained without the reflector. The prototype antennas and rectifiers have been simulated, fabricated, measured various parameters, and compared with the simulation results. The antennas provide more than 82% radiation efficiency and an enhanced gain of greater than 5.6 dB. The peak efficiency of rectifiers of more than 30% has been achieved. The aforementioned three antennas are integrated with their corresponding rectifiers for operating at 1.8, 2.1, and 2.3 GHz frequencies. The proposed rectennas are formidably suitable for the reception of RF power from the cellular bands.

Type
Antenna Design, Modeling and Measurements
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2020

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Tang, R and Du, Z (2017) Wideband monopole without lumped elements for octa-band narrow frame TE smartphone. IEEE Antennas and Wireless Propagation Letters 16, 720723.CrossRefGoogle Scholar
Khemar, A, Kacha, A, Takhedmit, H and Abib, G (2018) Design and experiments of a dual-band rectenna for ambient RF energy harvesting in urban environments. IET Microwaves Antennas and Propagation 12, 4955.CrossRefGoogle Scholar
Chuma, EL, Lano, Y, Bravo-Roger, LL, De la Torre Rodríguez, LM and Sanchez-Soriano, MA (2018) Compact rectenna based on a fractal geometry with a high conversion energy efficiency per area. IET Microwaves Antennas and Propagation 12, 173178.CrossRefGoogle Scholar
Shen, S, Chiu, CY and Murch, RD (2017) A dual-port triple-band L-probe microstrip patch rectenna for ambient RF energy harvesting. IEEE Antennas and Wireless Propagation Letters 16, 30713074.CrossRefGoogle Scholar
Zhang, M, Andrenko, AS, Liu, X, Li, Z and Tan, HZ (2017) A compact fractal loop rectenna for RF energy harvesting. IEEE Antennas and Wireless Propagation Letters 16, 24242427.CrossRefGoogle Scholar
Trinh, LH (2016) Reconfigurable antenna for future spectrum reallocations in 5G communications. IEEE Antennas and Wireless Propagation Letters 15, 12971300.CrossRefGoogle Scholar
Mathew, S, Ameen, M, Jayakrishnan, MP, Mohanan, P and Vasudevan, K (2016) Compact dual polarised V slit, stub, and slot embedded circular patch antenna for UMTS/WiMAX/WLAN applications. Electronic Letters 52, 14251426.CrossRefGoogle Scholar
Arrawatia, M, Baghini, MS and Kumar, G (2016) Broadband bent triangular omnidirectional antenna for RF energy harvesting. IEEE Antennas and Wireless Propagation Letters 16, 3639.Google Scholar
Cui, Y, Yang, L, Liu, B and Li, RL (2016) Multiband planar antenna for LTE/GSM/UMTS and WLAN/WiMAX handsets. IET Microwaves Antennas and Propagation 10, 502506.CrossRefGoogle Scholar
Bhellar, B and Tahir, FA (2015) Frequency reconfigurable antenna for handheld wireless devices. IET Microwaves Antennas and Propagation 9, 14121417.CrossRefGoogle Scholar
Velan, S, Sundarsingh, EF, Malathi, K, Sarma, AK, Raviteja, C, Sivasamy, R and Jayaram, KP (2015) Dual-band EBG integrated monopole antenna deploying fractal geometry for wearable applications. IEEE Antennas and Wireless Propagation Letters 14, 249252.CrossRefGoogle Scholar
Chou, YJ, Lin, GS, Chen, JF, Chen, LS and Houng, MP (2015) Design of GSM/LTE multiband application for mobile phone antennas. Electronic Letters 51, 13041306.CrossRefGoogle Scholar
Song, C, Huang, Y, Zhou, J, Zhang, J, Yuan, S and Carter, P (2015) A high-efficiency broadband rectenna for ambient wireless energy harvesting. IEEE Transactions on Antennas and Propagation 63, 34863495.CrossRefGoogle Scholar
Ahmed, S, Tahir, FA, Shamim, A and Cheema, HM (2015) A compact Kapton-based inkjet-printed multiband antenna for flexible wireless devices. IEEE Antennas and Wireless Propagation Letters 14, 18021805.CrossRefGoogle Scholar
Sundarsingh, EF, Sangeetha, V, Malathi, K, Sarma, AK, Raviteja, C and Alsath, MGN (2014) Polygon-shaped slotted dual-band antenna for wearable applications. IEEE Antennas and Wireless Propagation Letters 13, 611614.CrossRefGoogle Scholar
Roslan, SF, Kamarudin, MR, Khalily, M and Jamaluddin, MH (2014) A MIMO rectangular dielectric resonator antenna for 4G applications. IEEE Antennas and Wireless Propagation Letters 13, 321324.CrossRefGoogle Scholar
Cui, Y, Li, RL and Wang, P (2013) Novel dual-broadband planar antenna and its array for 2G/3G/LTE base stations. IEEE Transactions on Antennas and Propagation 12, 11321139.CrossRefGoogle Scholar
Fernandez, SC and Sharma, SK (2013) Multiband printed meandered loop antennas with MIMO implementations for wireless routers. IEEE Antennas and Wireless Propagation Letters 12, 9699.CrossRefGoogle Scholar
Masotti, D, Costanzo, A, Prete, MD and Rizzoli, V (2013) Genetic-based design of a tetra- band high-efficiency radio-frequency energy harvesting system. IET Microwaves Antennas and Propagation 7, 12541263.CrossRefGoogle Scholar
Kuhn, V, Lahuec, C, Seguin, F and Person, C (2015) A multi-band stacked RF energy harvester with RF-to-DC efficiency up to 84%. IEEE Transactions On Microwave Theory and Techniques 63, 17681778.CrossRefGoogle Scholar