Hostname: page-component-7c8c6479df-27gpq Total loading time: 0 Render date: 2024-03-28T19:23:12.795Z Has data issue: false hasContentIssue false

A broad band circularly polarized cross slot cavity back array antenna with sequentially rotated feed network for improving gain in X-band application

Published online by Cambridge University Press:  23 May 2016

Majid- Fakheri
Affiliation:
Faculty of Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Mohammad Naser-Moghadasi*
Affiliation:
Faculty of Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Ramezan Ali- Sadeghzadeh
Affiliation:
Faculty of Electrical and Computer Engineering, K. N. Toosi University of Technology, Tehran, Iran
*
Corresponding author:M. Naser-Moghadasi Email: mn.moghaddasi@srbiau.ac.ir

Abstract

This paper presents a new broad band circularly polarized slot antenna array based on substrate-integrated waveguide (SIW) and aperture feeding techniques. The antenna element's impedance and 3 dB axial-ratio (AR) bandwidths are from 8.8 to 10.4 GHz (16.67%) and 9.5–10.7 GHz (12%), respectively. Employing aperture-coupled feed and combining this method with sequentially rotated network, a 2 × 2 antenna array is achieved. Parametric optimization procedure is used to enhance the antenna specifications. In the presented scheme by reducing mutual coupling caused by the SIW technique and sequentially rotated feed network, all parameters of antenna are improved. Consequently a novel antenna array with impedance bandwidth of 2.8 GHz (8.7–11.5 GHz) and 3 dB AR bandwidth of 2.1 GHz (9–11.05 GHz) are obtained. The average gain of the proposed antenna is about 16.7 dBic. A new method is used to increase the gain of antenna array. The extracted result shows that side lob level, mutual coupling, impedance bandwidth, and performance of antenna simultaneously are controlled.

Type
Research Papers
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Jin, C.; Shen, Z.; Li, R.; Alphones, A.: Compact circularly polarized antenna based on quarter-mode substrate integrated waveguide sub-array. IEEE Trans. Antennas Propag., 62 (2) (2014), 963967.CrossRefGoogle Scholar
[2] Dashti, H.; Neshati, M.H.: Development of low-profile patch and semi-circular SIW cavity hybrid antennas. IEEE Trans. Antennas Propag., 62 (9) (2014), 44814488.CrossRefGoogle Scholar
[3] Deng, F.; Yi, X.; Wu, W.: Design and performance of a double-layer miniaturized-element frequency selective surface. IEEE Antennas Wireless Propag. Lett., 12 (2013), 721724.CrossRefGoogle Scholar
[4] Cheng, J.; Li, R.; Alphones, A.; Bao, X.: Quarter-mode substrate integrated waveguide and its application to antennas design. IEEE Trans. Antennas Propag., 61 (6) (2013), 29212928.Google Scholar
[5] Luo, G.Q.; Hu, Z.F.; Liang, Y.; Li, Y.Y.; Sun, L.L.: Development of low profile cavity backed crossed slot antennas for planar integration. IEEE Trans. Antennas Propag., 57 (10) (2009), 29722979.Google Scholar
[6] Kim, D.; Lee, J.W.; Cho, C.S.; Lee, T.K.: X-band circular ring-slot antenna embedded in single-layered SIW for circular polarization. Electron. Lett., 45 (13) (2009), 668669.CrossRefGoogle Scholar
[7] Shiqiang, F.; Shaojun, F.; Wang, Z.; Li, X.: Broadband circularly polarized slot antenna array fed by asymmetric CPW for L-band applications. IEEE Antennas Wireless Propag. Lett., 48 (10) (2009), 10141016.CrossRefGoogle Scholar
[8] Gao, S.; Qin, Y.; Sambell, A.: Low-cost broadband circularly polarized printed antennas and array. IEEE Antennas Propag. Mag., 49 (4) (2007), 5764.CrossRefGoogle Scholar
[9] Rafii, V.; Nourinia, J.; Ghobadi, C.; Pourahmadazar, J.; Virdee, B.S.: Broadband circularly polarized slot antenna array using sequentially rotated technique for C-band applications. IEEE Antennas Wireless Propag. Lett., 12 (2013), 128131.CrossRefGoogle Scholar
[10] Karamzadeh, S.; Virdee, B. S.; Rafii, V.; Kartal, M.: Circularly polarized slot antenna array with sequentially rotated feed network for broadband application. Int. J. RF Microw. Comput.-Aid. Eng., 25 (4) (2015), 358363.CrossRefGoogle Scholar
[11] Sood, K.; Jyoti, R.; Sharma, S.B.: Linear array modules with prescribed using waveguide shunt slot-fed Microstrip patch elements. Int. J. Microw. Wireless Technol., 61 (11) (2013), 637644.CrossRefGoogle Scholar
[12] Huang, J.: A parallel-series-fed microstrip array with high efficiency and low cross polarization. Microw. Opt. Technol. Lett., 5 (5) (2007), 230233.CrossRefGoogle Scholar
[13] Pourahmadazar, J.; Rafii, V.: Broadband circularly polarized slot antenna array for L- and S-band applications. Electron. Lett., 48 (10) (2012), 542543.CrossRefGoogle Scholar
[14] Dashti, H.; Neshati, M.H.: Development of low-profile patch and semi-circular SIW cavity hybrid antennas IEEE Trans. Antennas Propag., 62 (9) (2014), 44814488. doi: 10.1109/TAP.2014.2334708.CrossRefGoogle Scholar