Book contents
- Introduction to Surface Engineering
- Introduction to Surface Engineering
- Copyright page
- Dedication
- Dedication
- Contents
- Preface
- 1 Background to the Subject
- 2 Surface Engineering Basics
- 3 Surface Engineering with Diffusion Technologies
- 4 Surface Engineering with Deposition Technologies
- 5 Surface Engineering by Other Means
- 6 Surface Degradation and Its Evaluation
- 7 Surface Engineering for Cutting Tools
- 8 Surface Engineering for Automotive Engine Components
- 9 Surface Engineering for Gas Turbine Engines (GTEs)
- 10 Surface Engineering for Bio-Medical Implants
- Appendix A – Phase Diagrams
- Index
- Nomenclature
- References
2 - Surface Engineering Basics
Published online by Cambridge University Press: 20 January 2017
Book contents
- Introduction to Surface Engineering
- Introduction to Surface Engineering
- Copyright page
- Dedication
- Dedication
- Contents
- Preface
- 1 Background to the Subject
- 2 Surface Engineering Basics
- 3 Surface Engineering with Diffusion Technologies
- 4 Surface Engineering with Deposition Technologies
- 5 Surface Engineering by Other Means
- 6 Surface Degradation and Its Evaluation
- 7 Surface Engineering for Cutting Tools
- 8 Surface Engineering for Automotive Engine Components
- 9 Surface Engineering for Gas Turbine Engines (GTEs)
- 10 Surface Engineering for Bio-Medical Implants
- Appendix A – Phase Diagrams
- Index
- Nomenclature
- References
Summary
A summary is not available for this content so a preview has been provided. Please use the Get access link above for information on how to access this content.
- Type
- Chapter
- Information
- Introduction to Surface Engineering , pp. 4 - 34Publisher: Cambridge University PressPrint publication year: 2017
References
Bell, T. (1992), ‘Surface engineering: its current and future impact in tribology’, Journal of Physics D 25, A297–A306.CrossRefGoogle Scholar
Bowden, F. P. and Tabor, D. (1950), The friction and lubrication of solids, Oxford University Press, Oxford.Google Scholar
Dahm, K. L., Ferguson, W. G., Murakami, R. and Dearnley, P. A. (1994), ‘Hardness characterisation of thin carbon coatings’, Surface Engineering 10 (3), 199–204.CrossRefGoogle Scholar
Dearnley, P. A. and Mallia, B. (2013), ‘The chemical wear (corrosion-wear) of novel Cr based hard coated 316L austenitic stainless steels in aqueous saline solution’, Wear 306, 263–275.CrossRefGoogle Scholar
Dennis, J. K. and Such, T. E. (1993), Nickel and chromium plating, 3rd edn, Woodhead Publishing Ltd, Cambridge.CrossRefGoogle Scholar
Dongfeng, D. and Koji, K. (1994), ‘Interface yield maps of a hard coating under sliding contact’, Thin Solid Films 245, 115–121.CrossRefGoogle Scholar
Goryacheva, I. G. (1998), Contact mechanics in tribology, Kluwer Academic Publishers, Dordrecht.CrossRefGoogle Scholar
HMSO (1986), Wear resistant surfaces in engineering – A guide to their production properties and selection, Department of Trade and Industry, Her Majesty’s Stationary Office, London.Google Scholar
Hutchings, I. M. (1992), Tribology – Friction and wear of engineering materials, Edward Arnold, London.CrossRefGoogle Scholar
Johnson, K. L. (1985), Contact mechanics, Cambridge University Press, Cambridge.CrossRefGoogle Scholar
Loubet, J. L., Georges, J. M. and Meille, G. (1985), ‘Vickers indentation curves of elastoplastic materials’, in Microindentation techniques in materials science and engineering, ASTM Special Technical Publication 889, American Society for Testing and Materials, Ann Arbor, USA, 72–89, edited by Blau, P. and Lawn, B..CrossRefGoogle Scholar
Mallia, B. and Dearnley, P. A. (2007), ‘The corrosion-wear response of Cr-Ti coatings’, Wear 263, 679–690.CrossRefGoogle Scholar
Matejka, D. and Benko, B. (1989), Plasma spraying of metallic and ceramic materials, John Wiley & Sons, Chichester, UK.Google Scholar
O’Sullivan, T. C. and King, R. B. (1988), ‘Sliding contact stress field due to a spherical indenter on a layered elastic half-space’, Journal of Tribology 110, 235–240.CrossRefGoogle Scholar
Pawlowski, L. (1995), The science & engineering of thermal spray coatings, John Wiley & Sons, Chichester, UK.Google Scholar
Sun, Y., Dearnley, P. A. and Bell, T. (1989), ‘The principal wear mechanisms of plasma nitrided low alloy steel’, in Plasma Surface Engineering, Vol. 2, First International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, DGM, Oberursel, Germany, 927–934.Google Scholar
Tabor, D. (2000), The hardness of metals, Oxford Classic Texts, Oxford University Press, Oxford.CrossRefGoogle Scholar
Thelning, K-E. (1981) Steel and its heat treatment – Bofors handbook, Butterworths, London, 381–382, 396, 404.Google Scholar
Vingsbo, O., Hogmark, S., Jönsson, B. and Ingemarsson, A. (1985), ‘Indentation hardness of surface coated materials’, in Microindentation techniques in materials science and engineering, ASTM Special Technical Publication 889, American Society for Testing and Materials, Ann Arbor, USA, 257–271, edited by Blau, P. and Lawn, B..CrossRefGoogle Scholar
Williams, J. (2000), Engineering tribology, Oxford University Press, Oxford, 45–65, 73–131.Google Scholar
Zum Gahr, K-H. (1987), Microstructure and wear of materials, Tribology Series 10, Elsevier, Amsterdam.Google Scholar