Skip to main content Accessibility help
×
Hostname: page-component-7479d7b7d-767nl Total loading time: 0 Render date: 2024-07-12T02:19:59.109Z Has data issue: false hasContentIssue false

6 - Cooperative techniques for energy-efficient wireless communications

from Part II - Physical communications techniques for green radio networks

Published online by Cambridge University Press:  05 August 2012

Osama Amin
Affiliation:
University of British Columbia, Canada
Sara Bavarian
Affiliation:
University of British Columbia, Canada
Lutz Lampe
Affiliation:
University of British Columbia, Canada
Ekram Hossain
Affiliation:
University of Manitoba, Canada
Vijay K. Bhargava
Affiliation:
University of British Columbia, Vancouver
Gerhard P. Fettweis
Affiliation:
Technische Universität, Dresden
Get access

Summary

Introduction

Cooperative communication techniques are envisioned as an integral part of nextgeneration wireless networks. Cooperative communication is based on extending the interactions between different communications nodes to obtain ubiquitous network access with the required quality of service (QoS). The virtual antenna array created by collaborating distributed communication nodes provides the network with a spatial diversity merit without the need to equip the nodes with multi-antenna transceivers. In addition to combating fading through spatial diversity, cooperative communication is a powerful technique to increase spectral efficiency, reduce energy consumption, and extend the network coverage with a lower cost than traditional networks [1, 2].

All the aforementioned advantages of cooperative communication encouraged the inclusion of relaying techniques in the International Mobile Telecommunication (IMT)-advanced fourth-generation (4G) standards IEEE 802.16m and Long Term Evolution-Advanced (LTE-A). These standards consider the two-hop relaying technique in their design, which is one of the well-studied cooperative transmission schemes. Multi-hop relaying is included in IEEE 802.16j, and other cooperative schemes, such as relay selection cooperative communication, are expected to be included in future generations of wireless communication networks to improve connectivity, achieve higher data rates, and reduce energy consumption compared to current networks [1, 3].

Energy-aware design is one of the main targets for the next generation of communication networks. This design helps both energy-constrained wireless devices and base stations to save energy and effectively work toward green communication solutions.

Type
Chapter
Information
Publisher: Cambridge University Press
Print publication year: 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] F. H. P., Fitzek and M. D., Katz, Cooperation in wireless networks: principles and applications; real egoistic behavior is to cooperate!, New York: Springer-Verlag, 2006.Google Scholar
[2] Y., Chen et al., “Fundamental trade-offs on green wireless networks,” IEEE Commun. Mag., vol. 49, no. 6, pp. 30–37, June 2011.Google Scholar
[3] K., Loa et al., “IMT-advanced relay standards,” IEEE Commun. Mag., vol. 48, no. 8, pp. 40–48, Aug. 2010.Google Scholar
[4] O., Blume, D., Zeller and U., Barth, “Approaches to energy efficient wireless access networks,” in Proc. of 4th Int. Symp. Communications, control and signal processing (ISCCSP'10), March 2010.Google Scholar
[5] L. M., Correia et al., “Challenges and enabling technologies for energy aware mobile radio networks,” IEEE Commun. Mag., vol. 48, no. 11, pp. 66–72, Nov. 2010.Google Scholar
[6] K., Pentikousis, “In search of energy-efficient mobile networking,” IEEE Commun. Mag., vol. 48, no. 1, pp. 95–103, Jan. 2010.Google Scholar
[7] S., Cui, A. J., Goldsmith, and A., Bahai, “Energy-efficiency of MIMO and cooperative MIMO techniques in sensor networks,” IEEE J. Select. Areas Commun., vol. 22, no. 6, pp. 1089–1098, Aug. 2004.Google Scholar
[8] S., Cui, A. J., Goldsmith, and A., Bahai, “Energy-constrained modulation optimization,” IEEE Trans. Wireless Commun., vol. 4, no. 5, pp. 2349–2360, Sept. 2005.Google Scholar
[9] T., Chen, H., Kim, and Y., Yang, “Energy-efficient metrics for green wireless communication schemes,” in Proc. of Int. Conf. Wireless Communication and Signal Processing, (WSCP'10) Oct. 2010.Google Scholar
[10] S., Wang and J., Nei, “Energy efficiency optimization of cooperative communication in wireless sensor networks,” EURASIP J. Wireless Commun. Netw., vol. 2010, Apr. 2010.Google Scholar
[11] A. J., Fehske, P., Marsch, and G., Fettweis, “Bit per Joule efficiency of cooperating base stations in cellular networks,” in Proc. of IEEE Globecom Workshop Green Communication, Dec. 2010.Google Scholar
[12] S., Zhang, Y., Chen, and S., Xu, “Joint bandwidth-power allocation for energy efficient transmission in multi-user systems,” in Proc. of IEEE Globecom Workshop Green Communication, Dec. 2010.Google Scholar
[13] G., Miao et al., “Energy-efficient design in wireless OFDMA,” in Proc. of IEEE Int. Conf. Communication, (ICC'08), pp. 3307–3312, May 2008.Google Scholar
[14] S., Cui, A. J., Goldsmith, and A., Bahai, “Power estimation for Viterbi decoders,” in Wireless Systems Lab, Stanford Univ., Stanford, CA, Technical Report, 2003.Google Scholar
[15] Y., Sankarasubramaniam, I. F., Akyildiz, and S. W., McLaughlin, “Energy efficiency based packet size optimization in wireless sensor networks,” in Proc. of IEEE 1st Int. Workshop on Sensor Network Protocols and Applications, 2003.Google Scholar
[16] P., Rost and G., Fettweis, “On the transmission-computation-energy trade-off in wireless and fixed networks,” in Proc. of IEEE Globecom Workshop on Green Communication, Dec. 2010.Google Scholar
[17] Q., Chen and M. C., Gursoy, “Energy efficiency analysis in amplify-and-forward and decode-and-forward cooperative networks,” in Proc. of IEEE Wireless Communications and Networking Conf., (WCNC'10), Apr. 2010.Google Scholar
[18] R., Madan et al., “Energy-efficient cooperative relaying over fading channels with simple relay selection,” IEEE Trans. Wireless Commun., vol. 7, no. 8, pp. 3013–3025, Aug. 2008.Google Scholar
[19] W., Yang et al., “Energy-efficient relay selection and optimal relay location in cooperative cellular networks with asymmetric traffic,” The Journal of China Universities of Posts and Telecommunications, vol. 17, no. 6, pp. 80–88, Dec. 2010.Google Scholar
[20] Z., Shelby et al., “Energy optimization in multi-hop wireless embedded and sensor networks,” International Journal on Wireless Information and Networks, vol. 12, no. 1, pp. 11–21, Jan. 2005.Google Scholar
[21] O., Oyman, J., Laneman, and S., Sandhu, “Multihop relaying for broadband wireless mesh networks: from theory to practice,” IEEE Commun. Mag., vol. 45, no. 11, pp. 116–122, Nov. 2010.Google Scholar
[22] S. K., Jayaweera, “Virtual MIMO-based cooperative communication for energy-constrained wireless sensor networks,” IEEE Trans. Wireless Commun., vol. 5, no. 5, pp. 984–989, May 2006.Google Scholar
[23] C., Schurgers, O., Aberthorne, and M., Srivastava, “Modulation scaling for energy aware communication systems,” in Proc. of Int. Symp. on Low Power Electronics and Design, pp. 96–99, Aug. 2001.Google Scholar
[24] C.-L., Wang, Y.-W., Huang, and Y.-C., Huang, “An energy-efficient cooperative SIMO transmission scheme for wireless sensor networks,” in Proc. IEEE Int. Conf. on Communication (ICC'09), pp. 1–5, June 2009.Google Scholar
[25] N., Krishnan and B., Natarajan, “Energy efficiency of cooperative SIMO schemes - amplify forward and decode forward,” in Proc. of Int. Conf. Computer Communications and Networks, (ICCCN'09), pp. 1–5, Aug. 2009.Google Scholar
[26] G. G. D. O., Brante, M. T., Kakitani, and R. D., Souza, “On the energy efficiency of some cooperative and non-cooperative transmission schemes in WSNs,” in Proc. 45th Ann. Conf. Information Sciences and Systems (CISS'11), pp. 1–6, Mar. 2011.Google Scholar
[27] I., Stanojev et al., “Energy efficiency of non-collaborative and collaborative hybrid-ARQ protocols,” IEEE Trans. Wireless Commun., vol. 8, no. 1, pp. 326–335, Jan. 2009.Google Scholar
[28] D., Gunduz and E., Erkip, “Opportunistic cooperation by dynamic resource allocation,” IEEE Trans. Wireless Commun., vol. 6, no. 4, pp. 1446–1454, Apr. 2007.Google Scholar
[29] L., Simić, S. M., Berber, and K. W., Sowerby, “Partner choice and power allocation for energy efficient cooperation in wireless sensor networks,” in Proc. IEEE Int. Conf. Communication (ICC'08), pp. 4255–4260, May 2008.Google Scholar
[30] L., Simić, S. M., Berber, and K. W., Sowerby, “Energy-efficiency of cooperative diversity techniques in wireless sensor networks,” in Proc. IEEE Int. Symp. Personal, Indoor and Mobile Radio Communication (PIMRC'07) pp. 1–5, 2007.Google Scholar
[31] H., Naqvi, S., Berber, and Z., Salcic, “Energy efficiency of collaborative communication with imperfect frequency synchronization in wireless sensor networks,” International Journal of Multimedia and Ubiquitous Engineering, vol. 5, no. 4, Oct. 2010.Google Scholar
[32] B., Zhao and M. C., Valenti, “Practical relay networks: a generalization of hybrid-ARQ,” in IEEE J. Select. Areas Commun., vol. 23, no. 1, pp. 7–18, Jan. 2005.Google Scholar
[33] A., Bletsas et al., “A simple cooperative diversity method based on network path selection,” IEEE J. Select. Areas Commun., vol. 24, no. 3, pp. 659–672, Mar. 2006.Google Scholar
[34] Z., Huang, T., Yamazato, and M., Katayama, “Modulation scaling for energy aware communication systems,” in Proc. of Int. Conf. Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP'08), pp. 96–99, Dec. 2008.Google Scholar
[35] R., Irmer et al., “Coordinated multipoint: concepts, performance, and field trial results,” IEEE Commun. Mag., vol. 49, no. 2, pp. 102–111, Feb. 2011.Google Scholar
[36] M., Sawahashi et al., “Coordinated multipoint transmission/reception techniques for LTE-advanced [Coordinated and Distributed MIMO],” IEEE Wireless Commun., vol. 17, no. 3, pp. 26–34, June 2010.Google Scholar
[37] E., Oh et al., “Toward dynamic energy-efficient operation of cellular network infrastructure,” IEEE Commun. Mag., vol. 49, no. 6, pp. 56–61, June 2011.Google Scholar
[38] S. V., Hanly and P., Whiting, “Information-theoretic capacity of multi-receiver networks,” Telecommun. Syst., vol. 1, no. 1, pp. 1–42, 1993.Google Scholar
[39] A. D., Wyner, “Shannon-theoretic approach to a Gaussian cellular multiple-access channel,” IEEE Trans. Info. Theory, vol. 40, no. 6, pp. 1713–1727, Nov. 1994.Google Scholar
[40] O., Somekh and S., Shamai, “Shannon-theoretic approach to a Gaussian cellular multiple-access channel with fading,” IEEE Trans. Info. Theory, vol. 46, no. 4, pp. 1401–1425, Jul. 2000.Google Scholar
[41] Z. J., Haas and C.-P., Li, “The multiply-detected macrodiversity scheme for wireless cellular systems,” IEEE Trans. Veh. Technol., vol. 47, no. 2, pp. 506–530, May 1998.Google Scholar
[42] L., Welburn, J. K., Cavers, and K. W., Sowerby, “A computational paradigm for space-time multiuser detection,” IEEE Trans. Commun., vol. 52, no. 9, pp. 1595–1604, Sept. 2004.Google Scholar
[43] M. C., Valenti and B. D., Woerner, “Iterative multiuser detection, macrodiversity combining, and decoding for the TDMA cellular uplink,” IEEE J. Select. Areas Commun., vol. 19, no. 8, pp. 1570–1583, Aug. 2001.Google Scholar
[44] E., Aktas, J., Evans, and S., Hanly, “Distributed base station processing in the uplink of cellular networks,” in Proc. of IEEE Int. Conf. Communications, (ICC'06.), vol. 4, pp. 1641–1646, June 2006.Google Scholar
[45] S., Bavarian and J. K., Cavers, “Reduced-complexity belief propagation for system-wide MUD in the uplink of cellular networks,” IEEE J. Select. Areas Commun., vol. 26, no. 3, pp. 541–549, Apr. 2008.Google Scholar
[46] V., Jungnickel et al., “Interference aware scheduling in the multiuser MIMO-OFDM downlink,” IEEE Commun. Mag., vol. 47, no. 6, pp. 56–66, June 2009.Google Scholar
[47] R., Irmer et al., “Multisite field trial for LTE and advanced concepts,” IEEE Commun. Mag., vol. 47, no. 2, pp. 92–98, Feb. 2009.Google Scholar
[48] P., Marsch, “Coordinated multi-point under a constrained backhaul and imperfect channel knowledge,” Ph.D. thesis, 2010.Google Scholar
[49] A., Muller and P., Frank, “Cooperative interference prediction for enhanced link adaptation in the 3GPP LTE uplink”, in Proc. of IEEE Vehicular Technology Conf., (VTC - Spring'10), pp. 1–5, 2010.Google Scholar
[50] M., Chiang et al., “Power control in wireless cellular systems,” now Publishers Inc., 2008. [Online]. Available: www.princeton.edu/∼chiangm/powercontrol.pdfGoogle Scholar
[51] S., Bavarian and J. K., Cavers, “Total power control for cooperative base stations uplink,” in Proc. of IEEE Vehicular Technology Conf. (VTC- Spring'09), pp. 1–5, April 2009.Google Scholar

Save book to Kindle

To save this book to your Kindle, first ensure coreplatform@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.

Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

Find out more about the Kindle Personal Document Service.

Available formats
×

Save book to Dropbox

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.

Available formats
×

Save book to Google Drive

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.

Available formats
×