The accurate prediction of turbulent mixing induced by Rayleigh–Taylor (R–T), Richtmyer–Meshkov (R–M) and Kelvin–Helmholtz (K–H) instabilities is very important in understanding natural phenomena and improving engineering applications. In applications, the prediction of mixing with the Reynolds-averaged Navier–Stokes (RANS) equation remains the most widely used method. The RANS method involves two aspects, i.e. physical modelling and model coefficients. Generally, the latter is determined empirically; thus, there is a lack of universality. In this paper, inspired by the well-known Reynolds decomposition, we propose a methodology to determine the model coefficients with the following three steps: (i) preset a set of analytical RANS solutions by fully using the knowledge of mixing evolutions; (ii) simplify the differential RANS equations to algebraic equations by imposing the preset solutions to RANS equations; (iii) solve the algebraic equations approximately to give the values of the entire model coefficients. The specific application of this methodology in the widely used K–L mixing model shows that, using the same set of model coefficients determined from the current methodology, the K–L model successfully predicts the mixing evolutions in terms of different physical quantities (e.g. temporal scalings and spatial profiles), density ratios and problems (e.g. R–T, R–M, K–H and reshocked R–M mixings). It is possible to extend this methodology to other turbulence models characterised with self-similar evolutions, such as K-$\epsilon$ mixing models.

Rational construction of Z-scheme photocatalysts and exploration of the Z-scheme charge transfer mechanism have drawn much attention in the field of CO2 reduction because of its great potential to alleviate energy crisis and environmental problems. In this study, a series of Z-scheme CdS/BiOI composites were constructed by depositing CdS nanoparticles on the surface of BiOI nanosheets. The synthesized materials were characterized comprehensively, and their photoreduction CO2 activities were evaluated. The results show that the composites exhibit higher photoreduction CO2 activity under visible light irradiation (λ > 400 nm) than pure CdS and BiOI. The yields of CO and CH4 for the optimal composite after 3 h irradiation are 3.32 and 0.54 μmol/g, respectively. The improved photocatalytic activity is attributed to Z-scheme transfer mode of the photogenerated charges in the composites. The mechanism of CO2 reduction is proposed and verified experimentally.

Maternal supraphysiological estradiol (E2) environment during pregnancy leads to adverse perinatal outcomes. However, the influence of oocyte exposure to high E2 levels on perinatal outcomes remains unknown. Thus, a retrospective cohort study was conducted to explore the effect of high E2 level induced by controlled ovarian stimulation (COH) on further outcomes after frozen embryo transfer (FET). The study included all FET cycles (n = 10,581) between 2014 and 2017. All cycles were categorized into three groups according to the E2 level on the day of the human Chorionic Gonadotropin trigger. Odds ratios (ORs) and their confidence intervals (CIs) were calculated to evaluate the association between E2 level during COH and pregnancy outcomes and subsequent neonatal outcomes. From our findings, higher E2 level was associated with lower percentage of chemical pregnancy, clinical pregnancy, ongoing pregnancy, and live birth as well as increased frequency of early miscarriage. Preterm births were more common among singletons in women with higher E2 level during COH (aOR1 = 1.93, 95% CI: 1.22–3.06; aOR2 = 2.05, 95% CI: 1.33–3.06). Incidence of small for gestational age (SGA) was more common in both singletons (aOR1 = 2.01, 95% CI: 1.30–3.11; aOR2 = 2.51, 95% CI: 1.69–3.74) and multiples (aOR1 = 1.58, 95% CI: 1.03–2.45; aOR2 = 1.99, 95% CI: 1.05–3.84) among women with relatively higher E2 level. No association was found between high E2 level during COH and the percentage of macrosomia or large for gestational age. In summary, oocyte exposure to high E2 level during COH should be brought to our attention, since the pregnancy rate decreasing and the risk of preterm birth and SGA increasing following FET.

CrFeNiTix (x = 0.2, 0.3, 0.4, 0.5, and 0.6 molar ratio) compositionally complex alloys were fabricated by vacuum arc melting to investigate the microstructure, hardness, and compressive properties. The results revealed that CrFeNiTix alloys consisted of the principal face-centered cubic (FCC) phase and body-centered cubic (BCC) solid solution, with an amount of (Ni, Ti)-rich hexagonal close-packed phase. CrFeNiTix alloys exhibited the typical dendrite. Ti0.2 and Ti0.3 alloys were composed of FCC and BCC solid solutions in the dendrite, as well as ε (Ni3Ti) and R (Ni2.67Ti1.33) phases in the inter-dendrite, simultaneously. For Ti0.4, Ti0.5, and Ti0.6 alloys, (Fe, Cr)-rich solid solution separated out and ε phase transformed into R phase gradually. Meanwhile, TEM analysis indicated that Ti0.4 alloy matrix consisted of the principal FCC phase containing (Ni, Ti)-rich intragranular nanoprecipitates. The hardness values of CrFeNiTix alloys were increased with the addition of Ti content and the high compressive strength of CrFeNiTix alloys was maintained, which was attributed to the solid solution strengthening and precipitation hardening.

Kaolinite can be used for many applications, including the underground storage of gases. Density functional theory was employed to investigate the adsorption of hydrogen molecules on the kaolinite (001) surface. The coverage dependence of the adsorption sites and energetics was studied systematically for a wide range of coverage, Θ (from 1/16 to 1 monolayer). The three-fold hollow site is the most stable, followed by the bridge, top-z and top sites. The adsorption energy of H2 decreased with increasing coverage, thus indicating the lower stability of surface adsorption due to the repulsion of neighbouring H2 molecules. The coverage has obvious effects on hydrogen adsorption. Other properties of the H2/kaolinite (001) system, including the lattice relaxation and changes of electronic density of states, were also studied and are discussed in detail.

A high power laser system was used to drive the ignition of inertial confinement fusion (ICF), of which the high energy, the uniform focal spot, the accurate laser waveform, and the synchronization between the laser beams are key parameters. To accomplish this, global laser characteristics control should be assured, which was the main purpose of the injection laser system. In this paper, the key technological progress involved in the improvement of the performance of the injection laser of SG-II is reported, including frequency domain control, time domain control, near-field spatial shaping, pre-amplifier technology, and the optical parametric chirped pulse amplification pump source.

Al1.3CrFeNi eutectic high entropy alloy was designed and prepared by arc-melting to investigate the microstructure and oxidation behaviors at 1000 °C. The XRD pattern shows that this alloy had a double bcc/B2 structure. SEM images indicates that the microstructure of the alloy is composed of two precipitates of [Cr, Fe] solid solution and NiAl intermetallic, which form the typical eutectic structure. To explore the thermal application of Al1.3CrFeNi alloy, the oxidation behavior of Al1.3CrFeNi alloy at 1000 °C was investigated. From XRD and SEM results, it could be concluded that Al2O3 and Cr2O3 were the predominant oxides during the oxidation process. In addition, spinel like FeCr2O4 was also observed in the oxide scale. According to the analysis of oxide precipitates, the whole process of oxides’ formation was discussed and a simplified oxidation dynamic model of Al1.3CrFeNi alloy at 1000 °C was obtained. This could promote the development of thermal applications in multi-component alloys field.

Observational studies have indicated that soya food consumption is inversely associated with blood pressure (BP). Evidence from randomised controlled trials (RCT) on the BP-lowering effects of soya protein intake is inconclusive. We aimed to evaluate the effectiveness of soya protein intake in lowering BP. The PubMed database was searched for published RCT in the English language through to April 2010, which compared a soya protein diet with a control diet. We conducted a random-effects meta-analysis to examine the effects of soya protein on BP. Subgroup and meta-regression analyses were performed to explore possible explanations for heterogeneity among trials. Meta-analyses of twenty-seven RCT showed a mean decrease of 2·21 mmHg (95 % CI − 4·10, − 0·33; P = 0·021) for systolic BP (SBP) and 1·44 mmHg (95 % CI − 2·56, − 0·31; P = 0·012) for diastolic BP (DBP), comparing the participants in the soya protein group with those in the control group. Soya protein consumption significantly reduced SBP and DBP in both hypertensive and normotensive subjects, and the reductions were markedly greater in hypertensive subjects. Significant and greater BP reductions were also observed in trials using carbohydrate, but not milk products, as the control diet. Meta-regression analyses further revealed a significantly inverse association between pre-treatment BP and the level of BP reductions. In conclusion, soya protein intake, compared with a control diet, significantly reduces both SBP and DBP, but the BP reductions are related to pre-treatment BP levels of subjects and the type of control diet used as comparison.

Angiostrongylus cantonensis infection causes eosinophilic meningitis in humans. Baicalein is a flavonoid originally isolated from the roots of Scutellaria baicalensis Georgi. In this study we evaluated the efficacy of the combination of albendazole and baicalein for treating eosinophilic meningitis in BALB/c mice. Therapeutic efficacy included the survival time, body weight, neurological function, leucocyte and eosinophil counts, eotaxin concentration, matrix metalloproteinase-9 (MMP-9) activity, larval recovery and histopathological examination. The results showed that the combination of albendazole and baicalein was more effective than either drug administered singly. Combination therapy increased the survival time, decreased body weight loss, neurological dysfunction, leucocyte response, eotaxin concentration and MMP-9 activity. Our results suggest that the combination of albendazole and baicalein may exhibit synergistic beneficial effects in the treatment of eosinophilic meningitis induced by A. cantonensis.