Whiteite-(MnMnMn), Mn2+Mn2+Mn2+2Al2(PO4)4(OH)2⋅8H2O, is a new whiteite-subgroup member of the jahnsite group from the Foote Lithium Company mine, Kings Mountain district, Cleveland County, North Carolina, USA. It was found in small vugs of partially oxidised pegmatite minerals on the East dump of the mine, in association with eosphorite, hureaulite, fairfieldite, mangangordonite, whiteite-(CaMnMn) and jasonsmithite. It occurs as sugary aggregates of blade-like crystals up to 0.1 mm long and as epitaxial overgrowths on whiteite-(CaMnMn). The crystals are colourless to very pale brown, with a vitreous lustre and a white streak. The blades are flattened on {001} and elongated along [010], with poor cleavage on {001}. The calculated density is 2.82 g⋅cm–3. Optically it is biaxial (–) with α = 1.599(2), β = 1.605(2), γ = 1.609(2) (white light); 2V (calc.) = 78.2°, having no observable dispersion or pleochroism, and with orientation X = b. Electron microprobe analyses and structure refinement gave the empirical formula (Mn2+0.59Ca0.38Na0.03)Σ1.00Mn1.00(Mn2+1.04Fe3+0.58Fe2+0.23Zn0.16Mg0.08)Σ2.09Al2.04(PO4)3.89(OH)3.18(H2O)7.26. Whiteite-(MnMnMn) is monoclinic, P2/a, a = 15.024(3) Å, b = 6.9470(14) Å, c = 9.999(2) Å, β = 110.71(3)°, V = 976.2(4) Å3 and Z = 2. The crystal structure was refined using synchrotron single-crystal data to wRobs = 0.057 for 2014 reflections with I > 3σ(I). Site occupancy refinements confirm the ordering of dominant Mn in the X, M1 and M2 sites of the general jahnsite-group formula XM1(M2)2(M3)2(H2O)8(OH)2(PO4)4. A review of published crystallochemical data for jahnsite-group minerals shows a consistent chemical pressure effect in these minerals, manifested as a contraction of the unit-cell parameter, a, as the mean size of the X and M1 site cations increases. This is analogous to negative thermal expansion, but with increasing cation size, rather than heating, inducing octahedral rotations that result in an anisotropic contraction of the unit cell.

Galeaclolusite, [Al6(AsO4)3(OH)9(H2O)4]⋅8H2O, is a new secondary hydrated aluminium arsenate mineral from Cap Garonne, Var, France. It forms crusts and spheroids of white fibres up to 50 μm long by 0.4 μm wide and only 0.1 μm thick. The fibres are elongated along [001] and flattened on (100). The calculated density is 2.27 g⋅cm–3. Optically, galeaclolusite is biaxial with α = 1.550(5), β not determined, γ = 1.570(5) (white light) and partial orientation: Z = c (fibre axis). Electron microprobe analyses coupled with crystal structure refinement results gives an empirical formula based on 33 O atoms of Al5.72Si0.08As2.88O33H34.12. Galeaclolusite is orthorhombic, Pnma, with a = 19.855(4), b = 17.6933(11), c = 7.7799(5) Å, V = 2733.0(7) Å3 and Z = 4. The crystal structure of galeaclolusite was established from its close relationship to bulachite and refined using synchrotron powder X-ray diffraction data. It is based on heteropolyhedral layers, parallel to (100), of composition Al6(AsO4)3(OH)9(H2O)4 and with H-bonded H2O between the layers. The layers contain [001] spiral chains of edge-shared octahedra, decorated with corner-connected AsO4 tetrahedra, that are the same as in the mineral liskeardite.

The mitigation of CMAS (calcium–magnesium–aluminum–silicon oxide) infiltration is a major requirement for the stability of thermal barrier coatings. In this study, yttria-stabilized zirconia (YSZ)–Al2O3–SiC, YSZ–Al2O3–Ta2O5, and YSZ–Al2O3–Nb2O5 self-healing composites produced by uniaxially pressing powders were investigated as an alternative to YSZ. CMAS infiltration in these materials was tested at 1250 °C for 10 h. Comparing the depth of CMAS infiltration using scanning electron microscope (SEM) in tandem with electron-dispersive X-ray spectroscopy (EDS), all self-healing materials were found to perform better than the reference materials. While standard YSZ shows massive CMAS infiltration, SEM micrographs and EDS maps revealed a 33-fold improvement in CMAS resistance for the YSZ–Al2O3–Nb2O5 system, which exhibited the best performance among the selected self-repairing materials. X-ray diffraction and high-resolution SEM micrographs taken 10 μm below the surface revealed that CMAS only infiltrated pores in the topmost region of the samples. Both YSZ–Al2O3–Ta2O5 and YSZ–Al2O3–Nb2O5 systems showed no signs of chemical reaction with CMAS.

In this paper, the generation of relativistic electron mirrors (REM) and the reflection of an ultra-short laser off the mirrors are discussed, applying two-dimension particle-in-cell simulations. REMs with ultra-high acceleration and expanding velocity can be produced from a solid nanofoil illuminated normally by an ultra-intense femtosecond laser pulse with a sharp rising edge. Chirped attosecond pulse can be produced through the reflection of a counter-propagating probe laser off the accelerating REM. In the electron moving frame, the plasma frequency of the REM keeps decreasing due to its rapid expansion. The laser frequency, on the contrary, keeps increasing due to the acceleration of REM and the relativistic Doppler shift from the lab frame to the electron moving frame. Within an ultra-short time interval, the two frequencies will be equal in the electron moving frame, which leads to the resonance between laser and REM. The reflected radiation near this interval and corresponding spectra will be amplified due to the resonance. Through adjusting the arriving time of the probe laser, a certain part of the reflected field could be selectively amplified or depressed, leading to the selective adjustment of the corresponding spectra.

The general structural formula for the walentaite group is [((A1yA1’1–y), A2)(H2O)n][Bx(As2)2–x(As3)M1(M2)2(TO4)2(O,OH)7], based on heteropolyhedral layers of configuration [M1(M2)2(TO4)2(O,OH)6], with surface-coordinated species at the B, As2 and As3 sites, and with interlayer hydrated cation groups centred at the A sites. The group is divided into walentaite and halilsarpite subgroups based on T = P5+ and As5+, respectively. Alcantarillaite, (IMA2019-072), [Fe3+0.5□0.5(H2O)4][CaAs3+2(Fe3+2.5W6+0.5)(AsO4)2O7], is a new member of the walentaite group from the Alcantarilla wolframite mine, Belalcázar, Córdoba, Andalusia, Spain. It occurs most commonly as lemon-yellow fillings together with massive scorodite in fissures and cracks in quartz adjacent to löllingite. It is also found as tiny yellow rosettes lining vugs and as spheroids of ultrathin blades. It is associated with scorodite, pharmacosiderite, ferberite and schneiderhöhnite. Optically it is biaxial (–), with α = 1.703(calc), β = 1.800(5), γ = 1.850(5) and 2V = 68(1)° (white light). Dispersion is r > v, moderate. The optical orientation is X = a, Y = c and Z = b. The calculated density is 3.06 g cm–3. Electron microprobe analyses together with crystal structure refinement results gives the empirical formula [Fe3+0.52□0.48(H2O)4][(Ca0.44K0.11Na0.05Fe2+0.24□0.42)As3+1.83][Fe3+2.54Al0.03W6+0.43)((As0.65P0.35)O4)2O5.86(OH)1.14]. Alcantarillaite is orthorhombic, with an average structure described in Imma, and with a = 24.038(8) Å, b = 7.444(3) Å, c = 10.387(3) Å, V = 1858.6(11) Å3 and Z = 4. The structure (wRobs = 0.078 for 651 reflections to a resolution of 0.91 Å) differs most significantly from other walentaite-group members in having an interlayer A2 site occupied. Square-pyramidal polyhedra centred at the A2 sites form edge-shared dimers, (Fe3+)2O4(H2O)4. The dimers share vertices with TO4 anions in the layers on either side to form 8-sided channels along [010] occupied by H2O molecules.

The increased use of insecticide seed treatments in rice has raised many questions about the potential benefits of these products. In 2014 and 2015, a field experiment was conducted near Stuttgart and Lonoke, AR, to evaluate whether an insecticide seed treatment could possibly lessen injury from acetolactate synthase (ALS)–inhibiting herbicides in imidazolinone-resistant (IR) rice. Two IR cultivars were tested (a hybrid, ‘CLXL745’, and an inbred, ‘CL152’), with and without an insecticide seed treatment (thiamethoxam). Four different herbicide combinations were evaluated: a nontreated control, two applications of bispyribac-sodium (hereafter bispyribac), two applications of imazethapyr, and two applications of imazethapyr plus bispyribac. The first herbicide application was to two- to three-leaf rice, and the second immediately prior to flooding (one- to two-tiller). At both 2 and 4 wk after final treatment (WAFT), the sequential applications of imazethapyr or bispyribac plus imazethapyr were more injurious to CLXL745 than CL152. This increased injury led to decreased groundcover 3 WAFT. Rice treated with thiamethoxam was less injured than nontreated rice and had improved groundcover and greater canopy heights. Even with up to 32% injury, the rice plants recovered by the end of the growing season, and yields within a cultivar were similar with and without a thiamethoxam seed treatment across all herbicide treatments. Based on these results, thiamethoxam can partially protect rice from injury caused by ALS-inhibiting herbicides as well as increase groundcover and canopy height; that is, the injury to rice never negatively affected yield.

Laser–plasma interaction (LPI) at intensities $10^{15}{-}10^{16}~\text{W}\cdot \text{cm}^{-2}$ is dominated by parametric instabilities which can be responsible for a significant amount of non-collisional absorption and generate large fluxes of high-energy nonthermal electrons. Such a regime is of paramount importance for inertial confinement fusion (ICF) and in particular for the shock ignition scheme. In this paper we report on an experiment carried out at the Prague Asterix Laser System (PALS) facility to investigate the extent and time history of stimulated Raman scattering (SRS) and two-plasmon decay (TPD) instabilities, driven by the interaction of an infrared laser pulse at an intensity ${\sim}1.2\times 10^{16}~\text{W}\cdot \text{cm}^{-2}$ with a ${\sim}100~\unicode[STIX]{x03BC}\text{m}$ scalelength plasma produced from irradiation of a flat plastic target. The laser pulse duration (300 ps) and the high value of plasma temperature (${\sim}4~\text{keV}$) expected from hydrodynamic simulations make these results interesting for a deeper understanding of LPI in shock ignition conditions. Experimental results show that absolute TPD/SRS, driven at a quarter of the critical density, and convective SRS, driven at lower plasma densities, are well separated in time, with absolute instabilities driven at early times of interaction and convective backward SRS emerging at the laser peak and persisting all over the tail of the pulse. Side-scattering SRS, driven at low plasma densities, is also clearly observed. Experimental results are compared to fully kinetic large-scale, two-dimensional simulations. Particle-in-cell results, beyond reproducing the framework delineated by the experimental measurements, reveal the importance of filamentation instability in ruling the onset of SRS and stimulated Brillouin scattering instabilities and confirm the crucial role of collisionless absorption in the LPI energy balance.

A multi-scale strategy is employed in the paper to investigate the thermo-mechanical properties of 2.5D angle-interlock woven shape memory polymer composites (SMPCs). In the study, the mesoscopic model of 2.5D woven SMPCs and microscopic model of yarns are firstly developed. After that, the themo-viscoelastic constitutive relationship of the yarn is described in the form of hereditary integral and the parameters of relaxation moduli are obtained from nonlinear fitting of Prony series based on the results of finite element method (FEM). Based on the multi-scale models and the constitutive relationship, the effects of warp and weft arranged densities on viscoelastic properties of 2.5D woven SMPCs are studied in detail. Finally, the shape memory behavior along the warp direction in small strain region is also analyzed. The research in the paper lays a foundation for design and application of woven SMPCs in engineering.

Each year there are multiple reports of drift occurrences, and the majority of drift complaints in rice are from imazethapyr or glyphosate. In 2014 and 2015, multiple field experiments were conducted near Stuttgart, AR, and near Lonoke, AR, to evaluate whether insecticide seed treatments would reduce injury from glyphosate or imazethapyr drift or decrease the recovery time following exposure to a low rate of these herbicides. Study I was referred to as the “seed treatment study,” and Study II was the “drift timing study.” In the seed treatment study the conventional rice cultivar ‘Roy J’ was planted, and herbicide treatments included imazethapyr at 10.5 g ai ha–1, glyphosate at 126 g ae ha–1, or no herbicide. Each plot had either a seed treatment of thiamethoxam, clothianidin, chlorantraniliprole, or no insecticide seed treatment. The herbicides were applied at the two- to three-leaf growth stage. Crop injury was assessed 1, 3, and 5 wk after application. Averaged over site-years, thiamethoxam-treated rice had less injury than rice with no insecticide seed treatment at each rating, along with an increased yield. Clothianidin-treated rice had an increased yield over no insecticide seed treatment, but the reduction in injury for both herbicides was less pronounced than in the thiamethoxam-treated plots. Overall, chlorantraniliprole was generally the least effective of the three insecticides in reducing injury from either herbicide and in protecting rice yield potential. A second experiment conducted at Stuttgart, AR, was meant to determine whether damage to rice from glyphosate and imazethapyr was influenced by the timing (15, 30, and 45 d after planting) of exposure to herbicides for thiamethoxam-treated and nontreated rice. There was an overall reduction in injury with the use of thiamethoxam, but the reduction in injury was not dependent on the timing of the drift event. Reduction in damage from physical drift of glyphosate and imazethapyr as well as increased yields over the absence of an insecticide seed treatment appear to be an added benefit.

Guillain Barré syndrome (GBS), which is triggered by autoantibodies produced in response to antigenic stimuli such as certain infections and vaccinations, is the most common cause of acute flaccid paralysis worldwide. Campylobacter, the most common bacterial enteric infection in the USA, is reported to be the most commonly diagnosed antecedent of GBS, yet little information is available about the risk of post-Campylobacter GBS. Data collected through active, population-based surveillance in the Emerging Infections Program during the 2009–2010 novel Influenza A (H1N1) vaccination campaign allowed us to compare confirmed and probable GBS cases to non-cases to determine whether antecedent Campylobacter infection (or a diarrhoeal illness consistent with campylobacteriosis) was more common among cases and to assess the risk of GBS following Campylobacter infection. We estimate that 8–12% of GBS cases in the USA are attributable to Campylobacter infection (or a diarrhoeal illness consistent with campylobacteriosis), with 434–650 cases of post-diarrhoeal GBS annually and about 49 cases of GBS per 100 000 Campylobacter infections. These results provide updated estimates for post-Campylobacter GBS incidence in the USA and highlight an important benefit of effective measures to prevent Campylobacter infections.