Hepatitis B virus-related acute-on-chronic liver failure (HBV-ACLF) is a severe and life-threatening complication, characterised by multi-organ failure and high short-term mortality. However, there is limited information on the impact of various comorbidities on HBV-ACLF in a large population. This study aimed to investigate the relationship between comorbidities, complications and mortality. In this retrospective observational study, we identified 2166 cases of HBV-ACLF hospitalised from January 2010 to March 2018. Demographic data from the patients, medical history, treatment, laboratory indices, comorbidities and complications were collected. The mortality rate in our study group was 47.37%. Type 2 diabetes mellitus was the most common comorbidity, followed by alcoholic liver disease. Spontaneous bacterial peritonitis, pneumonia and hepatic encephalopathy (HE) were common in these patients. Diabetes mellitus and hyperthyroidism are risk factors for death within 90 days, together with gastrointestinal bleeding and HE at admission, HE and hepatorenal syndrome during hospitalisation. Knowledge of risk factors can help identify HBV-ACLF patients with a poor prognosis for HBV-ACLF with comorbidities and complications.

Due to the lack of research between the inner layers in the structure of colonic mucous and the metabolism of fatty acid in the constipation model, we aim to determine the changes in the mucous phenotype of the colonic glycocalyx and the microbial community structure following treatment with Rhubarb extract in our research. The constipation and treatment models are generated using adult male C57BL/6N mice. We perform light microscopy and transmission electron microscopy (TEM) to detect a Muc2-rich inner mucus layer attached to mice colon under different conditions. In addition, 16S rDNA sequencing is performed to examine the intestinal flora. According to TEM images, we demonstrate that Rhubarb can promote mucin secretion and find direct evidence of dendritic structure-linked mucus structures with its assembly into a lamellar network in a pore size distribution in the isolated colon section. Moreover, the diversity of intestinal flora has noticeable changes in constipated mice. The present study characterizes a dendritic structure and persistent cross-links have significant changes accompanied by the alteration of intestinal flora in feces in models of constipation and pretreatment with Rhubarb extract.

We report on a power-scalable sub-100-fs laser in the 2-μm spectral range using a Tm3+-doped ‘mixed’ (Lu,Sc)2O3 sesquioxide ceramic as an active medium. Pulses as short as 58 fs at 2076 nm with an average output power of 114 mW at a pulse repetition rate of approximately 82.9 MHz are generated by employing single-walled carbon nanotubes as a saturable absorber. A higher average power of 350 mW at 2075 nm is obtained at the expense of the pulse duration (65 fs). A maximum average power of 486 mW is achieved for a pulse duration of 98 fs and an optical conversion efficiency of 22.3%, representing the highest value ever reported from sub-100-fs mode-locked Tm lasers.

In recent years, the controlling nutritional status (CONUT) score has increasingly became an effective indicator associated with tumor prognosis. This study was conducted to synthesise data on the prognostic value of CONUT score on patients with upper tract urothelial carcinoma (UTUC) or renal cell carcinoma (RCC) undergoing nephrectomy. We designed and performed a systematic analysis of studies that verified the correlation between preoperative CONUT score and prognosis for UTUC and RCC using PubMed, Web of Science and Embase. The conclusion was clarified by pooled hazard ratios (HR) and 95% confidence intervals (95% CI). Subgroup analysis were further conducted in accordance with different primary tumor. Six studies involving 3529 patients were included in this evidence synthesis, which revealed that the CONUT score had a potential role to predict the survival of UTUC and RCC patients accepting surgery. Pooled analysis showed that the overall survival (OS, HR 2·32, p < 0·0001), cancer-specific survival (CSS, HR 2·68, p < 0·0001) and disease-free survival (DFS, HR 1·62, p < 0·00001) were inferior in the high CONUT score group when compared with low score group. Subgroup analysis revealed that this result was in line with UTUC (OS: HR 1·86, p = 0·02; CSS: HR 2·24, p = 0·01; DFS: HR 1·54, p < 0·00001) and RCC (OS: HR 3·05, p < 0·00001; CSS: HR 3·47, p < 0·00001; DFS: HR 2·21, p = 0·0005) patients respectively. Consequently, the CONUT score is a valuable preoperative index to predict the survival of patients with UTUC or RCC undergoing nephrectomy.

The provenance and tectonic setting of the Lower–Middle Triassic clastic sediments from the Napo basin, South China, have been examined here using detrital modes, whole-rock geochemistry and detrital zircon U–Pb ages. Field investigations indicate that these sediments consist of fan delta, slope and turbidity fan facies with dominantly southward palaeocurrent directions. Detrital modes and geochemical characteristics of the clastic rocks indicate that they were derived from mixed magmatic arc and Palaeozoic successions in a continental island arc setting, with no significant sediment recycling. The U–Pb age spectra of sandstone detrital zircons from different stratigraphic positions are similar, with one major group (300–230 Ma), two subordinate groups (400–320 Ma and 480–420 Ma, respectively) and two scattered groups (1200–800 Ma and 2000–1700 Ma, respectively). Thus, we consider that the north late Permian – Middle Triassic volcanic rocks and the uplifted Palaeozoic sedimentary/volcanic sequences constituted the predominant sources. The detritus derived from the late Permian Emeishan mafic rocks is subordinate and limited. The pre-Devonian zircons are likely sedimentary-recycled or magmatic-captured instead of directly derived from the early Palaeozoic orogen (e.g. Yunkai massif) and Neoproterozoic Jiangnan orogen because of the topographic barrier of a magmatic arc and carbonate platform. Considering the spatial and temporal distribution characteristics of the volcanic arc and ophiolite, we suggest that the Triassic Napo basin was a fore-arc basin within a continental island arc setting, which developed in response to the northward subduction of the Babu–Cao Bang branch ocean beneath the South China Block.

The present study evaluated whether fat mass assessment using the triceps skinfold (TSF) thickness provides additional prognostic value to the Global Leadership Initiative on Malnutrition (GLIM) framework in patients with lung cancer (LC). We performed an observational cohort study including 2672 LC patients in China. Comprehensive demographic, disease and nutritional characteristics were collected. Malnutrition was retrospectively defined using the GLIM criteria, and optimal stratification was used to determine the best thresholds for the TSF. The associations of malnutrition and TSF categories with survival were estimated independently and jointly by calculating multivariable-adjusted hazard ratios (HR). Malnutrition was identified in 808 (30·2 %) patients, and the best TSF thresholds were 9·5 mm in men and 12 mm in women. Accordingly, 496 (18·6 %) patients were identified as having a low TSF. Patients with concurrent malnutrition and a low TSF had a 54 % (HR = 1·54, 95 % CI = 1·25, 1·88) greater death hazard compared with well-nourished individuals, which was also greater compared with malnourished patients with a normal TSF (HR = 1·23, 95 % CI = 1·06, 1·43) or malnourished patients without TSF assessment (HR = 1·31, 95 % CI = 1·14, 1·50). These associations were concentrated among those patients with adequate muscle mass (as indicated by the calf circumference). Additional fat mass assessment using the TSF enhances the prognostic value of the GLIM criteria. Using the population-derived thresholds for the TSF may provide significant prognostic value when used in combination with the GLIM criteria to guide strategies to optimise the long-term outcomes in patients with LC.

A 1178 J near diffraction limited 527 nm laser is realized in a complete closed-loop adaptive optics (AO) controlled off-axis multi-pass amplification laser system. Generated from a fiber laser and amplified by the pre-amplifier and the main amplifier, a 1053 nm laser beam with the energy of 1900 J is obtained and converted into a 527 nm laser beam by a KDP crystal with 62% conversion efficiency, 1178 J and beam quality of 7.93 times the diffraction limit (DL). By using a complete closed-loop AO configuration, the static and dynamic wavefront distortions of the laser system are measured and compensated. After correction, the diameter of the circle enclosing 80% energy is improved remarkably from 7.93DL to 1.29DL. The focal spot is highly concentrated and the 1178 J, 527 nm near diffraction limited laser is achieved.

This study aimed to evaluate to what extent the different interval times between trophectoderm (TE) biopsy and vitrification influence the clinical outcomes in preimplantation genetic testing (PGT) cycles. Patients who underwent frozen embryo transfer (FET) after PGT between 2015 and 2019 were recruited. In total, 297 cycles with single day 5 euploid blastocyst transfer were included. These cycles were divided into three groups according to the interval times: <1 h group, 1–2 h group, and ≥2 h group. Blastocyst survival, clinical pregnancy, miscarriage, and ongoing pregnancy rates were compared. The results showed that, in PGT-SR cycles, survival rate in the ≥2 h group (96.72%) was significantly lower than in the <1 h group (100%, P = 0.047). The clinical pregnancy rate in the ≥2 h group was 55.93%, significantly lower than in the <1 h group (74.26%, P = 0.017). The ongoing pregnancy rates in the 1–2 h group and the ≥2 h group were 48.28% and 47.46%, respectively, significantly lower than that in the <1 h group (67.33%, P < 0.05). The miscarriage rate in the 1–2 h group was 18.42%, significantly higher than that in the <1 h group (5.33%, P = 0.027). In PGT-A cycles, the clinical pregnancy and ongoing pregnancy rates in the <1 h group were 67.44% and 53.49%, respectively, higher than that in the 1–2 h group (52.94%, 47.06%, P > 0.05) and the ≥2 h group (52.63%, 36.84%, P > 0.05). In conclusion, vitrification of blastocysts beyond 1 h after biopsy significantly influences embryo survival and clinical outcomes and is therefore not recommended.

Hypertension represents one of the most common pre-existing conditions and comorbidities in Coronavirus disease 2019 (COVID-19) patients. To explore whether hypertension serves as a risk factor for disease severity, a multi-centre, retrospective study was conducted in COVID-19 patients. A total of 498 consecutively hospitalised patients with lab-confirmed COVID-19 in China were enrolled in this cohort. Using logistic regression, we assessed the association between hypertension and the likelihood of severe illness with adjustment for confounders. We observed that more than 16% of the enrolled patients exhibited pre-existing hypertension on admission. More severe COVID-19 cases occurred in individuals with hypertension than those without hypertension (21% vs. 10%, P = 0.007). Hypertension associated with the increased risk of severe illness, which was not modified by other demographic factors, such as age, sex, hospital geological location and blood pressure levels on admission. More attention and treatment should be offered to patients with underlying hypertension, who usually are older, have more comorbidities and more susceptible to cardiac complications.

Biological materials represent a major source of inspiration to engineer protein-based polymers that can replicate the properties of living systems. Combined with our ability to control the molecular structure of proteins at the single amino acid level, this results in a vast array of attractive possibilities for materials science, an interest that is undeniably related to simplified procedures in gene synthesis, cloning, and biotechnological production. In parallel, it has been increasingly appreciated that living organisms exploit liquid–liquid phase separation (LLPS) to fabricate extracellular structures. In this article, we discuss the central role of protein LLPS in the fabrication of selected biological structures, including biological adhesives and hard biomolecular composites, and how physicochemical lessons from these systems are being replicated in synthetic analogs. Recent translational applications of protein LLPS are highlighted, notably aqueous-resistant adhesives, stimuli-responsive therapeutics carriers, and matrix materials for green structural composites.

Drug-induced liver injury (DILI) is a common adverse drug reaction leading to the interruption of tuberculosis (TB) therapy. We aimed to identify whether the hepatitis B virus (HBV) infection would increase the risk of DILI during first-line TB treatment. A meta-analysis of cohort studies searched in PubMed, Web of Science and China National Knowledge Infrastructure was conducted. Effect sizes were reported as risk ratios (RRs) and 95% confidence intervals (CIs) and calculated by R software. Sixteen studies with 3960 TB patients were eligible for analysis. The risk of DILI appeared to be higher in TB patients co-infected with HBV (RR 2.66; 95% CI 2.13–3.32) than those without HBV infection. Moreover, patients with positive hepatitis B e antigen (HBeAg) were more likely to develop DILI (RR 3.42; 95% CI 1.95–5.98) compared to those with negative HBeAg (RR 2.30; 95% CI 1.66–3.18). Co-infection with HBV was not associated with a higher rate of anti-TB DILI in latent TB patients (RR 4.48; 95% CI 0.80–24.99). The effect of HBV infection on aggravating anti-TB DILI was independent of study participants, whether they were newly diagnosed with TB or not. Besides, TB and HBV co-infection patients had a longer duration of recovery from DILI compared to non-co-infected patients (SMD 2.26; 95% CI 1.87–2.66). To conclude, the results demonstrate that HBV infection would increase the risk of DILI during TB therapy, especially in patients with positive HBeAg, and close liver function monitoring is needed for TB and HBV co-infection patients.

The upsurge in the number of people affected by the COVID-19 is likely to lead to increased rates of emotional trauma and mental illnesses. This article systematically reviewed the available data on the benefits of interventions to reduce adverse mental health sequelae of infectious disease outbreaks, and to offer guidance for mental health service responses to infectious disease pandemic. PubMed, Web of Science, Embase, PsycINFO, WHO Global Research Database on infectious disease, and the preprint server medRxiv were searched. Of 4278 reports identified, 32 were included in this review. Most articles of psychological interventions were implemented to address the impact of COVID-19 pandemic, followed by Ebola, SARS, and MERS for multiple vulnerable populations. Increasing mental health literacy of the public is vital to prevent the mental health crisis under the COVID-19 pandemic. Group-based cognitive behavioral therapy, psychological first aid, community-based psychosocial arts program, and other culturally adapted interventions were reported as being effective against the mental health impacts of COVID-19, Ebola, and SARS. Culturally-adapted, cost-effective, and accessible strategies integrated into the public health emergency response and established medical systems at the local and national levels are likely to be an effective option to enhance mental health response capacity for the current and for future infectious disease outbreaks. Tele-mental healthcare services were key central components of stepped care for both infectious disease outbreak management and routine support; however, the usefulness and limitations of remote health delivery should also be recognized.

Iridium (Ir) has an extremely high melting point (2443 °C), high chemical stability and is one of the most promising high-temperature materials. However, Ir is more difficult to process compared with other face-centered cubic metals, such as Ni and Al, which limits its applications. To solve this problem, we study the effect of 32 alloying elements (X) on stacking fault energy of dilute Ir-based alloys generated by shear deformation using the first-principles calculations. The investigation reveals that there are many alloying elements studied herein decrease the stacking fault energy of face-centered cubic (fcc) Ir, and the most effective element in reducing stacking fault energy of fcc Ir is Zn. The microscopic mechanism is caused by electron redistribution in the local stacking fault area. These results are expected to provide valuable guidance for the further design and application of Ir-based alloys.

A highly active catalyst of cerium–tungsten–titanium mixed oxide was synthesized by introducing Ce4+ and H2O2 in the base sample of Ce20W10Ti100Oz–Ce3+. As a consequence, the NH3-SCR activity of Ce20W10Ti100Oz–Ce3+ is significantly improved as the additives of Ce4+ and H2O2 enlarge the Brunauer–Emmett–Teller (BET) surface area by refining its pore size. Meanwhile, the introduction of Ce4+ increases the Lewis acid sites of Ce20W10Ti100Oz–Ce3+ and decreases its low-temperature Brønsted acid sites. The further addition of H2O2 improves the Brønsted acid sites and dispersion of cerium/tungsten species, and thereby enhances the concentrations of the adsorbed oxygen (Oα) and the adsorbed oxygen $\lpar {\rm {O}^{\prime}}_{\rm \alpha} \rpar$ due to the activation of chemisorbed water on the surface of the catalyst. The addition of Ce4+ and H2O2 shows a synergistic promotional effect, which is due to the largest BET surface area and the highest concentrations of Oα or/and ${\rm {O}^{\prime}}_{\rm \alpha}$. Ce20W10Ti100Oz–Ce3+:Ce4+ = 17.5:2.5 + H2O2 exhibits the highest catalytic activity compared with the conventional ones (Fig. 5).

Data on average iodine requirements for the Chinese population are limited following implementation of long-term universal salt iodisation. We explored the minimum iodine requirements of young adults in China using a balance experiment and the ‘iodine overflow’ hypothesis proposed by our team. Sixty healthy young adults were enrolled to consume a sequential experimental diet containing low, medium and high levels of iodine (about 20, 40 and 60 μg/d, respectively). Each dose was consumed for 4 d, and daily iodine intake, excretion and retention were assessed. All participants were in negative iodine balance throughout the study. Iodine intake, excretion and retention differed among the three iodine levels (P < 0·01 for all groups). The zero-iodine balance derived from a random effect model indicated a mean iodine intake of 102 μg/d, but poor correlation coefficients between observed and predicted iodine excretion (r 0·538 for μg/d data) and retention (r 0·304 for μg/d data). As iodine intake increased from medium to high, all of the increased iodine was excreted (‘overflow’) through urine and faeces by males, and 89·5 % was excreted by females. Although the high iodine level (63·4 μg/d) might be adequate in males, the corresponding level of 61·6 μg/d in females did not meet optimal requirements. Our findings indicate that a daily iodine intake of approximately half the current recommended nutrient intake (120 μg/d) may satisfy the minimum iodine requirements of young male adults in China, while a similar level is insufficient for females based on the ‘iodine overflow’ hypothesis.