Nutritional Risk Screening index is a standard tool to assess nutritional risk, but epidemiological data are scarce on Controlling Nutritional Status (CONUT) as a prognostic marker in acute hemorrhagic stroke (AHS). We aimed to explore whether the CONUT may predict a 3-month functional outcome in AHS. In total, 349 Chinese patients with incident AHS were consecutively recruited, and their malnutrition risks were determined using a high CONUT score of ≥ 2. The cohort patients were divided into high-CONUT (≥ 2) and low-CONUT (< 2) groups, and primary outcomes were a poor functional prognosis defined as the modified Rankin Scale (mRS) score of ≥ 3 at post-discharge for 3 months. Odds ratios (OR) with 95% confidence intervals (CI) for the poor functional prognosis at post-discharge were estimated by using a logistic analysis with additional adjustments for unbalanced variables between the high-CONUT and low-CONUT groups. A total of 328 patients (60.4 ± 12.83 years; 66.8% male) completed the mRS assessment at post-discharge for 3 months, with 172 patients at malnutrition risk at admission and 104 patients with a poor prognosis. The levels of total cholesterol and total lymphocyte counts were significantly lower in high-CONUT patients than low-CONUT patients (p = 0.012 and < 0.001, respectively). At 3-month post discharge, there was a greater risk for the poor outcome in the high-CONUT compared with the low-CONUT patients at admission (OR: 2.32, 95% CI: 1.28-4.17). High-CONUT scores independently predict a 3-month poor prognosis in AHS, which helps identify those who need additional nutritional managements.

This study examined the effect of a cryoprotectant with and without pentoxifylline supplementation on the motility and viability of human testicular sperm, both before and after freezing. Testicular samples were obtained from 68 patients with azoospermia who came to the Andrology Service of West China Second University Hospital, Sichuan University, for testicular biopsies from December 2019 to April 2020. All patients were assigned randomly to two groups: experimental, whose testicular sperm were added to the cryoprotectant with pentoxifylline, and the control, whose testicular sperm were added to the cryoprotectant without pentoxifylline. Both groups used the same freezing and thawing methods. Testicular sperm motility in the experimental group was significantly higher than that of the control group, both before and after cryopreservation. The recovery rate of sperm motility in the experimental group was significantly higher than that of the control group. The percentage of samples with motile testicular sperm in the experimental group was significantly higher than that of the control group after thawing. Sperm viability was unchanged between the experimental and control groups, both before and after freezing. Overall, a pentoxifylline-supplemented cryoprotectant can significantly improve the motility of testicular sperm before and after cryopreservation.

We carry out direct numerical simulations of turbulent Rayleigh–Bénard convection in a square box with rough conducting plates over the Rayleigh number range $10^7\leqslant Ra\leqslant 10^9$ and the Prandtl number range $0.01\leqslant Pr\leqslant 100$. In Zhang et al. (J. Fluid Mech., vol. 836, 2018, R2), it was reported that while the measured Nusselt number $Nu$ is enhanced at large roughness height $h$, the global heat transport is reduced at small $h$. The division between the two regimes yields a critical roughness height $h_c$, and we now focus on the effects of the Prandtl number ($Pr$) on $h_c$. Based on the variations of $h_c$, we identify three regimes for $h_c(Pr)$. For low $Pr$, thermal boundary layers become thinner with increasing $Pr$. This makes the boundary layers easier to be disrupted by rough elements, leading to the decrease of $h_c$ with increasing $Pr$. For moderate $Pr$, the corner-flow rolls become much more pronounced and suppress the global heat transport via the competition between the corner-flow rolls and the large-scale circulation (LSC). As a consequence, $h_c$ increases with increasing $Pr$ due to the intensification of the corner–LSC competition. For high $Pr$, the convective flow transitions to the plume-controlled regime. As the rough elements trigger much stronger and more frequent plume emissions, $h_c$ again decreases with increasing $Pr$.

Meiosis is a highly conserved process, and is responsible for the production of haploid gametes and generation of genetic diversity. We previously identified the transferrin receptor (TFRC) in the proteome profile of mice neonatal testes, indicating the involvement of the TFRC in meiosis. However, the exact molecular role of the TFRC in meiosis remains unclear. In this study, we aimed to determine the function of the TFRC in neonatal testicular development by TFRC knockdown using the testis culture platform. Our results showed high TFRC expression in 2-week testes, corresponding to the first meiotic division. Targeting TFRC using morpholino oligonucleotides resulted in clear spermatocyte apoptosis. In addition, we used the chromosomal spread technique to show that a deficiency of TFRC caused the accumulation of leptotene and zygotene spermatocytes, and a decrease of pachytene spermatocytes, indicating early meiotic arrest. Moreover, the chromosomes of TFRC-deficient pachytene spermatocytes displayed sustained γH2AX association, as well as SYCP1/SYCP3 dissociation beyond the sex body. Therefore, our results demonstrated that the TFRC is essential for the progression of spermatocyte meiosis, particularly for DNA double-stranded break repair and chromosomal synapsis.

Folate status for women during early pregnancy has been investigated, but data for women during mid-pregnancy, late pregnancy or lactation are sparse or lacking. Between May and July 2014, we conducted a cross-sectional study in 1211 pregnant and lactating women from three representative regions in China. Approximately 135 women were enrolled in each stratum by physiological periods (mid-pregnancy, late pregnancy or lactation) and regions (south, central or north). Plasma folate concentrations were measured by microbiological assay. The adjusted medians of folate concentration decreased from 28·8 (interquartile range (IQR) 19·9, 38·2) nmol/l in mid-pregnancy to 18·6 (IQR 13·2, 26·4) nmol/l in late pregnancy, and to 17·0 (IQR 12·3, 22·5) nmol/l in lactation (Pfor trend < 0·001). Overall, lower folate concentrations were more likely to be observed in women residing in the northern region, with younger age, higher pre-pregnancy BMI, lower education or multiparity, and in lactating women who had undergone a Caesarean delivery or who were breastfeeding exclusively. In total, 380 (31·4 %) women had a suboptimal folate status (folate concentration <13·5 nmol/l). Women in late pregnancy and lactating, residing in the northern region, having multiparity and low education level had a higher risk of suboptimal folate status, while those with older age had a lower risk. In conclusion, maternal plasma folate concentrations decreased as pregnancy progressed, and were influenced by geographic region and maternal socio-demographic characteristics. Future studies are warranted to assess the necessity of folic acid supplementation during later pregnancy and lactation especially for women at a higher risk of folate depletion.

In this paper, the generation of relativistic electron mirrors (REMs) and the reflection of an ultra-short laser off this mirrors are discussed, applying two-dimensional particle-in-cell (2D-PIC) simulations. REMs with ultra-high acceleration and expanding velocity can be produced from a solid nanofoil illuminated normally by an ultra-intense femtosecond laser pulse with a sharp rising edge. Chirped attosecond pulse can be produced through the reflection of a counter-propagating probe laser off the accelerating REM. In the electron moving frame, the plasma frequency of the REM keeps decreasing due to its rapidly expanding. The laser frequency, on the contrary, keeps increasing due to the acceleration of REM and the relativistic Doppler shift from the lab frame to the electron moving frame. Within an ultra-short time interval, the two frequencies will be equal in the electron moving frame, which leads the resonance between laser and REM. The reflected radiation near this interval and the corresponding spectra will be amplified due to the resonance. Through adjusting the arriving time of the probe laser, certain part of the reflected field could be selectively amplified or depressed, leading to the selectively adjusting of the corresponding spectra.

Mutation in CFAP43 leads to severe asthenozoospermia and multiple morphological abnormalities of the sperm flagellum (MMAF) in both human and mouse. Previous studies have shown that disruption of intra-manchette transport (IMT) caused failure of flagellum assembly and sperm head shaping. In a previous study, therefore, we postulated that disruption of IMT may contribute to the failure of sperm flagellum formation and result in MMAF, however the mechanisms underlying these defects are still poorly understood. Cfap43-deficient mice were studied here to reveal the cellular mechanisms of abnormal sperm head morphology and MMAF. Depletion of Cfap43 led to abnormal spermiogenesis and caused MMAF, sperm head abnormality and oligozoospermia. Furthermore, both abnormal manchette and disorganized ectoplasmic specialization (ES) could be observed at the elongated spermatids in Cfap43-deficient mice. Therefore, our findings demonstrated that, in mice, CFAP43-mediated IMT is essential for sperm head shaping and sperm flagellum formation.

This paper investigates the electromechanical behavior of functionally graded piezoelectric composite beams containing axially functionally graded (AFG) beam and piezoelectric actuators subjected to electrical load. The mechanical properties of the AFG beam are assumed to be graded along the axial direction. Employing the electromechanical coupling theory and load simulation method, the expression for the simulation load of the piezoelectric actuators is obtained. Based on Euler-Bernoulli beam theory and the obtained simulation load, the differential governing equation of the piezoelectric composite beams subjected to electrical load is derived. The integration-by-parts approach is utilized to solve the differential governing equation, and the expression for the deflection of the piezoelectric composite beams is obtained. The accuracy of the proposed method is validated by the finite element method. The bending response of the functionally graded piezoelectric composite beams is investigated through the proposed method. In the numerical examples, the effects of electrical load, actuator thickness, AFG beam thickness and AFG beam length on the electromechanical behavior of the functionally graded piezoelectric composite beams are studied.

This Research Reflection short review presents an overview of the effects of heat stress on dairy cattle udder health and discusses existing heat stress mitigation strategies for a better understanding and identification of appropriate abatement plans for future stress management. Due to high ambient temperatures with high relative humidity in summer, dairy cows respond by changes of physical, biochemical and biological pathways to neutralize heat stress resulting in decreased production performance and poorer immunity resulting in an increased incidence of intramammary infections (IMI) and a higher somatic cell count (SCC). In vitro studies on bovine polymorphonuclear cells (PMN) suggested that heat stress reduces the phagocytosis capacity and oxidative burst of PMN and alters the expression of apoptotic genes and miRNA which, together with having a negative effect on the immune system, may explain the increased susceptibility to IMI. Although there are limited data regarding the incidence rate of clinical mastitis in many countries or regions, knowledge of SCC at the cow or bulk tank level helps encourage farmers to improve herd health and to develop strategies for infection prevention and cure. Therefore, more research into bulk tank SCC and clinical mastitis rates is needed to explain the effect of heat stress on dairy cow udder health and functions that could be influenced by abatement plans.

A 6-week growth trial was conducted to evaluate the influences of dietary valine (Val) levels on growth, protein utilisation, immunity, antioxidant status and gut micromorphology of juvenile hybrid groupers. Seven isoenergetic, isoproteic and isolipidic diets were formulated to contain graded Val levels (1·21, 1·32, 1·45, 1·58, 1·69, 1·82 and 1·94 %, DM basis). Each experimental diet was hand-fed to triplicate groups of twelve hybrid grouper juveniles. Results showed that weight gain percentage (WG%), protein productive value, protein efficiency ratio, and feed efficiency were increased as dietary Val level increased, reaching a peak value at 1·58 % dietary Val. The quadratic regression analysis of WG% against dietary Val levels indicated that the optimum dietary Val requirement for hybrid groupers was estimated to be 1·56 %. Gut micromorphology and expression of growth hormone in pituitary, insulin-like growth factor 1, target of rapamycin and S6 kinase 1 in liver were significantly affected by dietary Val levels. In serum, fish fed 1·58 % dietary Val had higher superoxide dismutase, catalase, lysozyme activities and IgM concentrations than fish fed other dietary Val levels. Fish fed 1·58 % dietary Val had higher expression of NF-E2-related factor 2 in head kidney than fish fed other dietary Val levels. Generally, the optimum dietary Val requirement for maximal growth of hybrid groupers was estimated to be 1·56 % of DM, corresponding to 3·16 % of dietary protein, and dietary Val levels affected growth, protein utilisation, immunity and antioxidant status in hybrid groupers.

The present study evaluated the effects of dietary Zn level on growth performance, serum and hepatopancreas metabolites, expression of genes involved in lipid and energy metabolism, and the signalling pathway of dietary Zn-induced lipolysis. Five isonitrogenous and isolipidic diets were formulated to contain different Zn levels: 46·4 (basal diet), 77·2, 87·0, 117·1 and 136·8 mg/kg, respectively. The results indicated that shrimp fed the diet containing Zn at 117·1 mg/kg had higher weight gain and specific growth rate, and the lowest feed intake and feed conversion rate, than shrimp fed the other diets. The deposition rate of Zn in whole body significantly decreased with increasing dietary Zn level. Dietary Zn prevented the accumulation of free radicals and improved antioxidant activities by increasing Cu/Zn superoxide dismutase and reducing malondialdehyde in hepatopancreas. Dietary Zn supplementation enhanced lipase activity and adiponectin, which could promote TAG breakdown and fatty acid oxidation and lead to reduced lipid in hepatopancreas. The mRNA expressions of ob-rb, adipor, camkkβ, ampk, cd36, mcd and cpt1 involved in Zn-induced lipid catabolism were up-regulated, and the expressions of srebp, acc, fas and scd1 were down-regulated. The mRNA levels of SLC39 family genes (zip3, zip9, zip11 and zip14) in hepatopancreas were up-regulated with increasing dietary Zn level. The results demonstrated that dietary Zn level could significantly affect growth performance, tissue deposition of Zn, lipid metabolites and expression of genes involved in lipogenesis and lipolysis in Litopenaeus vannamei.

We report a facile method to fabricate CuNi nano-octahedra and nanocubes using a colloidal synthesis approach. The CuNi nanocrystals terminated with exclusive crystallographic facets were controlled and achieved by a group of synergetic capping ligands in a hot solution system. Specifically, the growth of {111}-bounded CuNi nano-octahedra is derived by a thermodynamic control, whereas the generation of {100}-terminated CuNi nanocubes is steered by a kinetic capping of chloride. Using a reduction of 4-nitrophenol with sodium borohydride as a model reaction, CuNi nano-octahedra and nanocubes demonstrated a strong facet-dependence due to their different surface energies although both exhibited remarkable catalytic activity with the high rate constant over mass (k/m). A kinetic study indicated that this is a pseudo first-order reaction with an excess of sodium borohydride. CuNi nanocubes as the catalysts showed better catalytic performance (k/m = 385 s-1•g-1) than the CuNi nano-octahedra (k/m = 120 s-1•g-1), indicating that 4-nitrophenol and hydrogen were adsorbed on the {100} facets with their molecules parallel to the surface much easier than those on {111} facets.

Echinococcus granulosus sensu stricto (s.s.), Echinococcus multilocularis and Echinococcus canadensis are the common causes of human echinococcosis in China. An accurate species identification tool for human echinococcosis is needed as the treatments and prognosis are different among species. The present work demonstrates a method for the simultaneous detection of these three Echinococcus species based on multiplex polymerase chain reaction (mPCR). Specific primers of this mPCR were designed based on the mitochondrial genes and determined by extensive tests. The method can successfully detect either separated or mixed target species, and generate expected amplicons of distinct size for each species. Sensitivity of the method was tested by serially diluted DNA, showing a detection threshold as less as 0.32 pg for both E. granulosus s.s. and E. canadensis, and 1.6 pg for E. multilocularis. Specificity assessed against 18 other parasites was found to be 100% except weakly cross-react with E. shiquicus. The assay was additionally applied to 69 echinococcosis patients and 38 healthy persons, confirming the high reliability of the method. Thus, the mPCR described here has high application potential for clinical identification purposes, and can further provide a useful tool for evaluation of serology and imaging method.

It is of practical significance to develop a constitutive model which is able to predict the thermomechanical behaviors of the shape memory effect occurring in a shape memory polymer (SMP) accurately. The mechanism of shape memory effect of SMP is explained based on the assumption that SMP is composed by two phases, reversible phase and stationary phase. Especially the different flow elements are respectively added to the reversible phase and stationary phase in order to express the plastic behavior of SMP. There are two springs in series, one dashpot and one flow element in the reversible phase. There are two springs in parallel, one dashpot and one flow element in the stationary phase. A constitutive equation is developed to express the thermo-mechanical behaviors of shape memory effect in the SMP based on viscous-elastic mechanics and plastic theory. An internal variable, frozen ratio, is defined to follow the shape memory process in SMP, and the material properties are described as the functions of frozen ratio based on phase transition theorem. The developed constitutive model, which includes above constitutive equation and material parameter functions, is used to numerically simulate the thermo-mechanical behaviors of SMP under various load cycles. Results show that the developed constitutive model can not only predict the shape memory process of SMP accurately, but also express the rate-dependent behaviors of SMP effectively.

Severe phase coarsening and separation in Sn–Bi alloys have brought increasing reliability concern in microelectronic packages. In this study, a phase field model is developed to simulate the microstructural evolution and evaluate the change in macroscopic physical properties of the flip chip Cu/Sn58Bi/Cu joint under the conditions of isothermal aging, as well as the coupled loads of elastic stress and electric current stressing. Results show that large-sized Bi-rich phase particles grow up at the expense of small-sized ones. Under the coupled loads, Bi atoms migrate along the electron flow direction, consequently Bi-rich phase segregates to form a Bi-rich phase layer at the anode. The current crowding ratio in the solder decreases rapidly first and then fluctuates slightly with time. Current density and von Mises stress exhibit inhomogeneous distribution, and both of them are higher in the Sn-rich phase than in the Bi-rich phase. Electric current transfers through the Sn-rich phase and detours the Bi-rich phase. As time proceeds, the resistance of the solder joint increases, and the average von Mises stress of the solder joint decreases. The Bi-rich phase coarsens much faster under the coupled loads than under the conditions of isothermal aging.

Rabbits play an important role in people’s lives due to their high nutritional value and high-quality hair that can be used as raw material for textiles. Furthermore, rabbits are an important animal model for human disease, as genome-edited animals are particularly valuable for studying gene functions and pathogenesis. Somatic cell nuclear transfer (SCNT) is an important technique for producing genome-edited animals and it has great value in saving endangered species and in clone stem cell therapy. However, the low efficiency of SCNT limits its application, with the selection of suitable rabbit oocytes being crucial to its success. In the present study, we collected oocytes from ovarian follicles and stained them with 26 μM brilliant cresyl blue (BCB). We then matured the oocytes in vitro and used them for SCNT. Comparison of the BCB-positive oocytes with BCB-negative oocytes and the control group showed that the BCB-positive group had a significantly higher maturation rate (81.4% vs. 48.9% and 65.3% for the negative and control groups, respectively), cleavage rate (86.6% vs. 67.9% and 77.9%), blastocyst rate (30.5% vs. 12.8% and 19.6%), total number of blastocysts (90±7.5 vs. 65.3±6.3 and 67.5±5.7), and inner cell mass (ICM)/ trophectoderm (TE) index (42.3±4.2 vs. 30.2±2.1 and 33.9±5.1) (P<0.05). The BCB-positive group had a significantly lower apoptosis index (2.1±0.6 vs. 8.2±0.9 and 6.7±1.1 for the negative and control groups, respectively) (P<0.05). These findings demonstrate that BCB-positive oocytes have a higher maturation ability and developmental competence in vitro, indicating that BCB staining is a reliable method for selecting oocytes to enhance the efficiency of SCNT.

For spectrally negative Lévy processes, we prove several fluctuation results involving a general draw-down time, which is a downward exit time from a dynamic level that depends on the running maximum of the process. In particular, we find expressions of the Laplace transforms for the two-sided exit problems involving the draw-down time. We also find the Laplace transforms for the hitting time and creeping time over the running-maximum related draw-down level, respectively, and obtain an expression for a draw-down associated potential measure. The results are expressed in terms of scale functions for the spectrally negative Lévy processes.

Process parameters (laser power and scanning speed) for H13 steel specimens produced by selective laser melting (SLM) are optimized, and microstructural characteristics and mechanical properties are investigated. The optimum process parameters are a laser power of 170 W and a scanning speed of 400 mm/s according to the maximum relative density of 99.2%. The microstructure consists of cellular grains and columnar crystal, which are composed of lath martensite and retained austenite, and there are no carbides or other second-phase particles present. The size of cellular grains is 1 μm. Compared with the common processed (forged and heat-treated) H13, SLM H13 has similar microhardness (561 HV) and tensile strength (1909 MPa) values. However, the elongation (12.4%) is a factor of ∼3 times higher and the impact energy (14.4 J) of the SLM specimen is somewhat lower. The relationship between the microstructure and mechanical properties is discussed. Fine grains and no second-phase precipitation determine the strength and plasticity of SLM samples.