The sorption of nitrate ions on calcined hydrotalcite-type compounds at 550°C (HT550), 650°C (HT650), and 850°C (HT850) from pure water solution at 25°C has been studied. The influence of the temperature was also investigated for the sample calcined at 850°C by studying the sorption process at 10 and 40°C. The experimental sorption data points were fitted to the Langmuir equation in order to calculate the sorption capacities (Xm) of the samples; Xm values range from 61.7 g kg−1 (HT550 at 25°C) to 147.0 g kg−1 (HT850 at 40°C). The values for the removal efficiency (R) obtained ranged from 70.5% for HT550 at 25°C to 99.5% for HT850 at 40°C. The sorption experiments showed that the greater the calcination temperature (850°C), the more effective the removal of nitrate. The increase in the temperature from 10 to 40°C for sample HT850 also tends to increase the sorption of nitrate from 63.3 g kg−1 to 147 g kg−1 and the corresponding removal efficiency from 71.5 to 99.5%.

The assignments of OH-bending bands in the infrared (IR) spectra of dioctahedral smectites (montmorillonites, ferruginous smectites, and nontronites) have been revisited using a cation mass-valence sum (CM-VS) approach to quantify octahedral cation occupancy. The CM-VS approach enabled prediction of OH-bending band positions (in wavenumbers) related to OH-sharing octahedral cation pairs that had valence sums of 4 and 5, and cation masses associated with Fe(II) and Mg. Application of rules for the relationship enabled determination of the location of OH-sharing octahedral cation pairs containing Mg and Fe(II) for which previous assignments have been considered controversial, e.g. Fe(III)Mg-OH and MgMg-OH, or for which assignments have been missing due to lack of spectroscopic evidence, e.g. AlFe(II)-OH, Fe(III)Fe(II)-OH, Fe(II)Mg-OH, and Fe(II)Fe(II)-OH. Examples of these bands from several natural ferruginous smectites and nontronites are discussed. Quantification of IR spectra was used to develop a better understanding of the octahedral cation occupancy of this important class of Fe(III)-enriched smectites. While Fe(II) contents may be somewhat overestimated by the IR technique, those for four of the six ferruginous smectites studied here agree well with data from Mössbauer spectroscopy.

A detailed stratigraphic and facies reconstruction of a bentonitized acid-tuff succession, deposited within the transgressive systems tract of the Upper Miocene-Sarmatian Ser-3 eustatic cycle, at Sajóbábony, northern Hungary, was performed via petrographic, mineralogical and geochemical analyses. The purpose of the work was to analyze the degree of alteration of the volcanogenic sediments, as an indicator of the relative volcanic sedimentation rate. This may have an important role in indicating volcanic periods synchronous with sedimentation or reconstructing the volcanosedimentary paleoconditions. Sample pairs were collected from each bentonite and tuff layer, and, to facilitiate microstratigraphic relations, samples were collected every 10 cm within bentonite layers. Mineralogical analyses were performed by X-ray diffraction and geochemical analyses by inductively coupled plasma-mass spectroscopy.

The CaO/K2O and Eu/La ratios correlate with each other and with a montmorillonite/X-ray-amorphous phase ratio, reflecting Ca and Eu incorporation associated with devitrification and smectite formation. In accordance with the current literature, these mineralogical and geochemical proxies can be related primarily to the weathering processes. Considering vertical distributions in a sequence-stratigraphic context, the Ca content and Eu/La values show that local peaks and Eu anomalies characteristic of acid tuffs show minima at flooding surfaces (FS). Within a bentonite layer, representing a single transgressive period, the repeated events of dust-tuff accumulations have been determined by K2O/CaO and La/Eu peaks, confirmed also by the Eu anomalies in the rare earth element (REE) patterns, thus leading to the conclusion that the level of alteration is closely correlated with the elimination of terrigenous input and a minimum in volcanic sedimentation rate allowing more intensive alteration of the deposited volcanic material. In the case of fine tuff beds, Eu anomalies on REE patterns reflect limited alteration at the bottom and more intensive alteration in the upper parts of the beds, reflecting the effect of infiltration of sea water into the pores.

Low-charge beidellites were synthesized by a hydrothermal treatment applied to an amorphous gel phase in basic solution. The hydrothermal conditions for the syntheses were chosen from the stability field of beidellite previously investigated in the literature. The synthetic samples were characterized chemically and structurally using X-ray diffraction, infrared spectroscopy, cation exchange capacity measurement, and chemical and thermal analyses. We compared the synthetic sample with a natural beidellite sample (SbId) from Idaho, USA, looking at chemical composition and particle size. The main difference is the octahedral site occupancy (cis- or trans-vacant layer structure). The natural SbId sample has trans-vacant layers and the synthetic sample has a preferentially cis-vacant character. This character can be modulated, using specific synthesis conditions. The cis- or trans-vacant layer structure of various synthetic beidellites was investigated at low temperature (<350°C) and pressure (<25 MPa). Depending on the pressure and/or synthesis temperature, the proportion of cis-vacant layers ranges from 20 to 100% and increases with the layer-charge deficit.

An organophilic bentonite was prepared by means of a reaction of natural Na-montmorillonite with trimethyldococylammonium which has an especially long n-alkyl chain. The addition of trimethyldococylammonium to montmorillonite was in the range 0.25–3.0 times the cation exchange capacity (CEC) of the clay (i.e. 0.23–2.82 mmol/g clay). The particle morphology in organic liquid suspensions of organoclay complexes was studied by measuring the viscosity based on Eyring’s rate process and Robinson’s relative sediment volume. In toluene, montmorillonite with 1.17 mmol/g clay trimethyldococylammonium (1.25 times the CEC) had the largest specific gel volume, relative sediment volume, and K-factor. The results of the stoichiometry for trimethyldococylammonium-montmorillonite show that practically all of the quaternary ammonium was adsorbed to montmorillonite. Maximum half widths of 001 reflections from X-ray diffraction patterns were obtained in the range 0.74–1.17 mmol/g clay, indicating a disordered arrangement of the organic cation molecules intercalated between the layers. Appreciable shifts to lower-frequency regions in the Fourier transform infrared absorption spectra as a result of CH2-stretching vibrations were observed with increasing amounts of the organic cation. When increasing the amount of organic cation added to the clay from 0.94 to 1.41 mmol/g clay, a large shift occurred to the lower-frequency side, approaching the frequency of the organic cation alone. This indicates that the interaction between adjacent hydrocarbon chains becomes progressively stronger, due to van der Waals attraction, with increases in the amount of organic cation. Interactions of the alkyl chains in trimethyldococylammonium-montmorillonite complexes with irregularly distributed and randomly arranged alkyl chains between the silicate layers were weak, and, as a result, solvation with external organic liquids occurred and gel formation developed through macroscopic swelling of the organoclay.

Quantitative analysis of the smectite-to-illite and illite-to-muscovite transformations indicates that 17–28 wt.% SiO2 and 17–23 wt.% SiO2, respectively, are liberated during these reactions, assuming that Al is conserved. Dissolution of quartz silt in shales yields up to 6–9% SiO2 in the range up to 200°C and a further 10–15% SiO2 in the 200–500°C range. For muds altered to shales at 200°C, 14–20 wt.% silica is evolved. From 200 to 500°C, a further 18–28 wt.% silica is evolved. Additional small amounts of silica may be released in the alteration of feldspar to clay and by stylolitization of quartz silt. Thus, in the burial and temperature range of diagenesis into the epizone, major quantities of silica are released from clays and by quartz dissolution in shales. Within this range of alteration, concomitant decline of whole-rock Si/Al (SiO2/Al2O3) in the transformation of smectite to illite to muscovite suggests the liberated silica migrates from the source shale. As a result, the metamorphosed shales are more micaceous and less quartzose than their progenitor muds. In the diagenetic zone and anchizone, the evolved silica is probably a major source of quartz cement in sandstones. In the epizone, evolved silica is commonly present in quartz veins in the parent rocks. Fluid-inclusion temperatures in quartz overgrowths and fracture fillings in some sandstones suggest that some cements may have been derived from downdip basinal shales and pressure solution in sandstones.

Ionic liquids intercalated in kaolinite constitute a novel class of nanostructured material. Kaolinite-pyrrolidinium halide intercalates have been prepared successfully by reacting the pyrrolidinium salts with kaolinite which was preintercalated with dimethyl sulfoxide (DMSO) using the melt condition under N2. X-ray diffraction, 13C magic angle spinning nuclear magnetic resonance, differential thermal analysis (DTA)-thermal gravimetric analysis, and Fourier transform infrared spectroscopy confirm the displacement of DMSO during the intercalation process. Based on results from the various characterization techniques, a structural model is proposed in which one mole of the pyrrolidinium salt covers two or three structural units of kaolinite, depending on the structure and size of the salt. The thermal stability was improved remarkably after intercalation of the pyrrolidinium salts, compared to the pre-intercalate. The DTA-TGA data show that the largest number of organic units released and decomposed, occurs under N2 flow, at temperatures ranging from 260 to 340°C, depending on the nature of the intercalated organic salts.

Using 19F magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy, we show that most of the fluoride present in the KGa-lb reference kaolinite from Washington County, Georgia, occurs as a surface-adsorbed species bonded to Al. This surface fluoride can be removed from the <2 µm fraction by acid wash, but is largely retained in the coarse fraction. Correlation of integrated 19F NMR peak intensities with fluoride sorption experiments indicates a bulk F content of ∼144 ppm for KGa-1b, of which ∼30% substitutes for hydroxyl sites in the mineral structure and the remaining 70% occurs adsorbed on particle surfaces, corresponding to an edge surface fluoride density of ∼0.7 F− nm−2. 19F{27Al} TRAPDOR (TRAnsfer of Populations in DOuble Resonance) NMR data for the original kaolinite and for products of F− sorption experiments at pH 4 show that all of the observed 19F signals arise from fluoride bonded to Al atoms. Furthermore, bridging Al-F-Al sites and terminal Al-F give distinctly different TRAPDOR fractions allowing assignment of resolved peaks based on the number of Al in the first coordination sphere. This result was confirmed for fluoride adsorbed to the surface of gibbsite from aqueous suspension. No evidence was found for Si-F-type environments on the kaolinite surfaces.

We used high-resolution X-ray texture goniometry to quantify changes in the mm-scale orientation of phyllosilicate minerals in a suite of Paleogene mudstones from the Podhale Basin in southern Poland. The sample set covers an estimated range of burial depths between 2.4 and 7.0 km, corresponding to a temperature range of 60–160°C. Although mechanical compaction has reduced porosities to ∼10% in the shallowest samples, the phyllosilicate fabric is only modestly aligned. Coarser-grained (>10 µm) detrital chlorite and mica appear to be more strongly aligned with (001) parallel to bedding, suggesting their deposition as single grains rather than as isotropic flocs or aggregates. From 2.4 to 4.6 km, R0 illite-smectite with 40–50% illite layers changes to R1 illite-smectite with 70–80%) illite layers. At the same time kaolinite is lost and diagenetic chlorite is formed. The mineralogical changes are accompanied by a strong increase in the alignment of illite-smectite, chlorite, and detrital illite, parallel to bedding and normal to the presumed principal effective stress. We propose that the development of a more aligned I-S fabric results from the dissolution of smectite and the growth of illite with (001) normal to the maximum effective stress. Water released by illitization may act as a lubricant for the rotation of all platy minerals into nanoporosity transiently formed by the illitization reaction. At greater depths and temperatures, further illitization is inhibited through the exhaustion of K-feldspar. After the cessation of illitization, a further 2.4 km of burial only results in a small increase in phyllosilicate alignment. At such small values for porosity and pore size, increasing stress does not substantially reorient phyllosilicates in the absence of mineralogical change.

Air-dried and high-pressure frozen/freeze-etched samples of clinopyroxene and smectite in a saprolitized clinopyroxenite from Koua Bocca, Ivory Coast, West Africa, were compared to characterize textures developed during natural weathering of chain silicates. Comparison with air-dried material allowed evaluation of high-pressure cryofixation as a technique for preserving textures of hydrated clay minerals. Air-dried pyroxene surfaces appear very smooth. Small, flat lamellae, oriented parallel to the c axis, lend a distinct splintery appearance to pyroxene surfaces in fully hydrated samples. These lamellae often display a combination of straight (110) pyroxene edges and a crinkled border, suggestive of smectite. Narrow lenticular (110) open cleavages occur in both preparations and are not a pressurization artifact. Most often these openings contain no secondary minerals. Spaces between pyroxene denticles, lined with collapsed smectite in air-dried samples, are filled with thin packets of anhedral smectite crystallites oriented face to face when hydrated. Smectite microboxwork preserves original topotactic textures developed during isovolumetric pyroxene transformation, and smaller nanoporosity appears in hydrated cryofixed examples. Occasional regions of edge-to-face ‘house of cards’ texture also occur. Elimination of sample preparation artifacts induced by surface tension during air drying demonstrates that pores actually present during a hydration reaction-driven weathering episode are smaller and more numerous than would be inferred from examining air-dried materials.