Members of the Ly-6/uPAR protein family share one or several repeat units of the Ly-6/uPAR domain that is defined by a distinct disulfide bonding pattern between 8 or 10 cysteine residues. The Ly-6/uPAR protein family can be divided into two subfamilies. One comprises GPI-anchored glycoprotein receptors with 10 cysteine residues. The other subfamily includes the secreted single-domain snake and frog cytotoxins, and differs significantly in that its members generally possess only eight cysteines and no GPI-anchoring signal sequence. We report the purification and structural characterization of human SLURP-1 (secreted mammalian Ly-6/uPAR related protein 1) from blood and urine peptide libraries. SLURP-1 is encoded by the ARS (component B)-81/s locus, and appears to be the first mammalian member of the Ly-6/uPAR family lacking a GPI-anchoring signal sequence. A phylogenetic analysis based on the SLURP-1 primary protein structure revealed a closer relationship to the subfamily of cytotoxins. Since the SLURP-1 gene maps to the same chromosomal region as several members of the Ly-6/uPAR subfamily of glycoprotein receptors, it is suggested that both biologically distinct subfamilies might have co-evolved from local chromosomal duplication events.

Recent studies of the refolding of reduced bovine pancreatic trypsin inhibitor (BPTI) have shown that a previously unidentified intermediate with a single disulfide is formed much more rapidly than any other one-disulfide species. This intermediate contains a disulfide that is present in the native protein (between Cys14 and 38), but it is thermodynamically less stable than the other two intermediates with single native disulfides. To characterize the role of the [14–38] intermediate and the factors that favor its formation, detailed kinetic and mutational analyses of the early disulfide-formation steps were carried out. The results of these studies indicate that the formation of [14–38] from the fully reduced protein is favored by both local electrostatic effects, which enhance the reactivities of the Cys14 and 38 thiols, and conformational tendencies that are diminished by the addition of urea and are enhanced at lower temperatures. At 25 °C and pH 7.3, approximately 35% of the reduced molecules were found to initially form the 14–38 disulfide, but the majority of these molecules then undergo intramolecular rearrangements to generate non-native disulfides, and subsequently the more stable intermediates with native disulfides. Amino acid replacements, other than those involving Cys residues, were generally found to have only small effects on either the rate of forming [14–38] or its thermodynamic stability, even though many of the same substitutions greatly destabilized the native protein and other disulfide-bonded intermediates. In addition, those replacements that did decrease the steady-state concentration of [14–38] did not adversely affect further folding and disulfide formation. These results suggest that the weak and transient interactions that are often detected in unfolded proteins and early folding intermediates may, in some cases, not persist or promote subsequent folding steps.

A sequence motif that is Similar to Ubiquitin (SUb) has been identified in the Saccharomyces cerevisiae ubiquitin-specific protease Ubp6. SUb is conserved in all known Ubp6 homologues from a spectrum of eukaryotic species and is also present in a group of hypothetical proteins of unknown function (Unk1-3) present in sequence databases. An N-terminal deletion mutant of Ubp6 that lacks SUb is still capable of cleaving α-linked ubiquitin fusions, suggesting that SUb forms a separate domain to the catalytic core of Ubp6 and demonstrating that it is not required for in vitro cleavage activity. A homology model of the 78 N-terminal amino acids of human Ubp6, based on the known fold of ubiquitin, is presented. In human Ubp6, SUb shares only 20% sequence identity with ubiquitin. Even weaker similarity occurs between S. cerevisiae SUb and ubiquitin. The homology model supports a ubiquitin-like fold for SUb and suggests that two conserved Lys residues, corresponding to Lys48 and Lys63 of ubiquitin, are functionally important.

The three N-glycosylation sites of human heparin binding protein (HBP) have been mutated to produce a nonglycosylated HBP (ng-HBP) mutant. ng-HBP has been crystallized and tested for biological activity. Complete X-ray data have been collected to 2.1 Å resolution, and the structure has been fully refined to an R-factor of 18.4% (Rfree 27.7%). The ng-HBP structure reveals that neither the secondary nor tertiary structure have changed due to the removal of the glycosylation, as compared to the previously determined glycosylated HBP structure. Although the primary events in N-linked glycosylation occurs concomitant with polypeptide synthesis and therefore possesses the ability to influence early events in protein folding, we see no evidence of glycosylation influencing the structure of the protein. The root-mean-square deviation between the superimposed structures was 0.24 Å (on Cα atoms), and only minor local structural differences are observed. Also, the overall stability of the protein seems to be unaffected by glycosylation, as judged by the B-factors derived from the two X-ray structures. The flexibility of a glycan site may be determined by the local polypeptide sequence and structure rather than the glycan itself. The biological in vitro activity assay data show that ng-HBP, contrary to glycosylated HBP, mediates only a very limited stimulation of the lipopolysaccharide induced cytokine release from human monocytes. In animal models of fecal peritonitis, glycosylated HBP treatment rescues mice from and an otherwise lethal injury. It appears that ng-HBP have significant effect on survival, and it can be concluded that ng-HBP can stimulate the host defence machinery albeit to a lesser extent than glycosylated HBP.

The “calorimetric criterion” is one of the important experimental approaches for determining whether protein folding is an “all-or-none” two-state transition (i.e., whether intermediates are present at equilibrium). The calorimetric criterion states that the equivalence of the “measured” calorimetric enthalpy change and the effective two-state van't Hoff enthalpy change demonstrates that there is a two-state transition. This paper addresses the essential question of whether the calorimetric criterion is a necessary and sufficient condition for a two-state process and shows that it is necessary but not sufficient by means of specific examples. Analysis of simple models indicates that the heat capacity curve, regardless of whether it originates from a two-state process or not, can always be decomposed in such a way that the calorimetric criterion is satisfied. Exact results for a three-state model and a homopolymer tetramer demonstrate that the deviation from the calorimetric criterion is not simply related to the population of intermediate states. Analysis of a three-helix bundle protein model, which has a two-state folding from a random coil to ordered (molten) globule, shows that the calorimetric criterion may not be satisfied if the standard linear interpolation of baselines (weighted or unweighted) is employed. A specific example also suggests that the more recently introduced deconvolution method is not necessarily better than the simple calorimetric criterion for distinguishing a two-state transition from a three-state transition. Although the calorimetric criterion is not a sufficient condition for a two-state process, it is likely to continue to be of practical utility, particularly when its results are shown to be consistent with those from other experimental methods.

Conformational free energy calculations have been carried out for proline-containing alanine-based pentadecapeptides with the sequence Ac-(Ala)n-Pro-(Ala)m-NHMe, where n + m = 14, to figure out the positional preference of proline in α-helices. The relative free energy of each peptide was calculated by subtracting the free energy of the extended conformation from that of the α-helical one, which is used here as a measure of preference. The highest propensity is found for the peptide with proline at the N-terminus (i.e., Ncap + 1 position), and the next propensities are found at Ncap, N′ (Ncap − 1), and C′ (Ccap + 1) positions. These computed results are reasonably consistent with the positional propensities estimated from X-ray structures of proteins. The breaking in hydrogen bonds around proline is found to play a role in destabilizing α-helical conformations, which, however, provides the favored hydration of the corresponding N–H and C=O groups. The highest preference of proline at the beginning of α-helix appears to be due to the favored electrostatic and nonbonded energies between two residues preceding proline and the intrinsic stability of α-helical conformation of the proline residue itself as well as no disturbance in hydrogen bonds of α-helix by proline. The average free energy change for the substitution of Ala by Pro in a α-helix is computed to be 4.6 kcal/mol, which is in good agreement with the experimental value of ∼4 kcal/mol estimated for an oligopeptide dimer and proteins of barnase and T4 lysozyme.

It is difficult to increase protein stability by adding hydrogen bonds or burying nonpolar surface. The results described here show that reversing the charge on a side chain on the surface of a protein is a useful way of increasing stability. Ribonuclease T1 is an acidic protein with a pI ≈ 3.5 and a net charge of ≈−6 at pH 7. The side chain of Asp49 is hyperexposed, not hydrogen bonded, and 8 Å from the nearest charged group. The stability of Asp49Ala is 0.5 kcal/mol greater than wild-type at pH 7 and 0.4 kcal/mol less at pH 2.5. The stability of Asp49His is 1.1 kcal/mol greater than wild-type at pH 6, where the histidine 49 side chain (pKa = 7.2) is positively charged. Similar results were obtained with ribonuclease Sa where Asp25Lys is 0.9 kcal/mol and Glu74Lys is 1.1 kcal/mol more stable than the wild-type enzyme. These results suggest that protein stability can be increased by improving the coulombic interactions among charged groups on the protein surface. In addition, the stability of RNase T1 decreases as more hydrophobic aromatic residues are substituted for Ala49, indicating a reverse hydrophobic effect.

The structural origins of the specificity of the neurophysin hormone-binding site for an aromatic residue in peptide position 2 were explored by analyzing the binding of a series of peptides in the context of the crystal structure of liganded neurophysin. A new modeling method for describing the van der Waals surface of binding sites assisted in the analysis. Particular attention was paid to the unusually large (5 kcal/mol) difference in binding free energy between Phe and Leu in position 2, a value representing more than three times the maximum expected based on hydrophobicity alone, and additionally remarkable since modeling indicated that the Leu side chain was readily accommodated by the binding pocket. Although evidence was obtained of a weak thermodynamic linkage between the binding interactions of the residue 2 side chain and of the peptide α-amino group, two factors are considered central. (1) The bound Leu side chain can establish only one-third of the van der Waals contacts available to a Phe side chain. (2) The bound Phe side chain appears to be additionally stabilized relative to Leu by more favorable dipole and induced dipole interactions with nonaromatic polar and sulfur ligands in the binding pocket, as evidenced by examination of its interactions in the pocket, analysis of the detailed energetics of transfer of Phe and Leu side chains from water to other phases, and comparison with thermodynamic and structural data for the binding of residue 1 side chains in this system. While such polar interactions of aromatic rings have been previously observed, the present results suggest their potential for significant thermodynamic contributions to protein structure and ligand recognition.

The knowledge of the binding sites of G protein-coupled cholecystokinin receptors represents important insights that may serve to understand their activation processes and to design or optimize ligands. Our aim was to identify the amino acid of the cholecystokinin-A receptor (CCK-AR) binding site in an interaction with the sulfate of CCK, which is crucial for CCK binding and activity. A three-dimensional model of the [CCK-AR-CCK] complex was built. In this model, Arg197 was the best candidate residue for a ionic interaction with the sulfate of CCK. Arg197 was exchanged for a methionine by site-directed mutagenesis. Wild-type and mutated CCK-AR were transiently expressed in COS-7 cells for pharmacological and functional analysis. The mutated receptor on Arg197 did not bind the agonist radioligand 125I-BH-[Thr, Nle]-CCK-9; however, it bound the nonpeptide antagonist [3H]-SR27,897 as the wild-type receptor. The mutant was ≅1,470- and 3,200-fold less potent than the wild-type CCK-AR to activate G proteins and to induce inositol phosphate production, respectively. This is consistent with the 500-fold lower potency and 800-fold lower affinity of nonsulfated CCK relative to sulfated CCK on the wild-type receptor. These data, together with those showing that the mutated receptor failed to discriminate nonsulfated and sulfated CCK while it retained other pharmacological features of the CCK-AR, strongly support an interaction between Arg197 of the CCK-AR binding site and the sulfate of CCK. In addition, the mutated CCK-AR resembled the low affinity state of the wild-type CCK-AR, suggesting that Arg197–sulfate interaction regulates conformational changes of the CCK-AR that are required for its physiological activation.

Unfolded apocytochrome c acquires an α-helical conformation upon interaction with lipid. Folding kinetic results below and above the lipid's CMC, together with energy transfer measurements of lipid bound states, and salt-induced compact states in solution, show that the folding transition of apocytochrome c from the unfolded state in solution to a lipid-inserted helical conformation proceeds via a collapsed intermediate state (IC). This initial compact state is driven by a hydrophobic collapse of the polypeptide chain in the absence of the heme group and may represent a heme-free analogue of an early compact intermediate detected on the folding pathway of cytochrome c in solution. Insertion into the lipid phase occurs via an unfolding step of IC through a more extended state associated with the membrane surface (IS). While IC appears to be as compact as salt-induced compact states in solution with substantial α-helix content, the final lipid-inserted state (Hmic) is as compact as the unfolded state in solution at pH 5 and has an α-helix content which resembles that of native cytochrome c.

The mechanism of the disulfide-bond forming enzyme DsbA depends on the very low pKa of a cysteine residue in its active-site and on the relative instability of the oxidized enzyme compared to the reduced one. A thermodynamic cycle has been used to correlate its redox properties to the difference in the free energies of folding (ΔΔGred/ox) of the oxidized and reduced forms. However, the relation was proved unsatisfied for a number of DsbA variants. In this study, we investigate the thermodynamic and redox properties of a highly destabilized variant DsbAP151A (substitution of cis-Pro151 by an alanine) by the means of intrinsic tryptophan fluorescence and by high-sensitivity differential scanning calorimetry (HS-DSC). When the value of ΔΔGred/ox obtained fluorimetrically for DsbAP151A does not correlate with the value expected from its redox potential, the value of ΔΔGred/ox provided by HS-DSC are in perfect agreement with the predicted thermodynamic cycle for both wild-type and variant. HS-DSC data indicate that oxidized wild-type enzyme and the reduced forms of both wild-type and variant unfold according to a two-state mechanism. Oxidized DsbAP151A shows a deviation from two-state behavior that implies the loss of interdomain cooperativity in DsbA caused by Pro151 substitution. The presence of chaotrope in fluorimetric measurements could facilitate domain uncoupling so that the fluorescence probe (Trp76) does not reflect the whole unfolding process of DsbAP151A anymore. Thus, theoretical thermodynamic cycle is respected when an appropriate method is applied to DsbA unfolding under conditions in which protein domains still conserve their cooperativity.

The Escherichia coli tryptophan repressor protein (TR) represses the transcription of several genes in response to the concentration of tryptophan in the environment. In the co-crystal structure of TR bound to a DNA fragment containing its target very few direct contacts between TR and the DNA were observed. In contrast, a number of solvent mediated contacts were apparent. NMR solution structures, however, did not resolve any solvent mediated bonds at the complex interface. To probe for the role of water in TR operator recognition, the effect of osmolytes on the interactions between TR and a target oligonucleotide bearing the operator site was examined. In the absence of specific solvent mediated hydrogen bonding interactions between the protein and the DNA, increasing osmolyte concentration is expected to strongly stabilize the TR operator interaction due to the large amount of macromolecular surface area buried upon complexation. The results of our studies indicate that xylose did not alter the binding affinity significantly, while glycerol and PEG had a small stabilizing effect. A study of binding as a function of betaine concentration revealed that this osmolyte at low concentration results in a stabilization of the 1:1 TR/operator complex, but at higher concentrations leads to a switching between binding modes to favor tandem binding. Analysis of the effects of betaine on the 1:1 complex suggest that this osmolyte has about 78% of the expected effect. If one accepts the analysis in terms of the number of water molecules excluded upon complexation, these results suggest that about 75 water molecules remain at the interface of the 1:1 dimer/DNA complex. This value is consistent with the number of water molecules found at the interface in the crystallographically determined structure and supports the notion that interfacial waters play an important thermodynamic role in the specific complexation of one TR dimer with its target DNA. However, the complexity of the effects of betaine and the small or negligible effects of the other osmolytes could also arise from osmolyte induced competition between antagonistic coupled reactions.

Left-handed polyproline II helices (PPII) are contiguous elements of protein secondary structure in which the φ and ψ angles of constituent residues are restricted to around −75° and 145°, respectively. They are important in structural proteins, in unfolded states and as ligands for signaling proteins. Here, we present a survey of 274 nonhomologous polypeptide chains from proteins of known structure for regions that form these structures. Such regions are rare, but the majority of proteins contain at least one PPII helix. Most PPII helices are shorter than five residues, although the longest found contained 12 amino acids. Proline predominates in PPII, but Gln and positively charged residues are also favored. The basis of Gln's prevalence is its ability to form an i, i + 1 side-chain to main-chain hydrogen bond with the backbone carbonyl oxygen of the proceeding residue; this helps to fix the ψ angle of the Gln and the φ and ψ of the proceeding residue in PPII conformations and explains why Gln is favored at the first position in a PPII helix. PPII helices are highly solvent exposed, which explains why apolar amino acids are disfavored despite preferring this region of φ/ψ space when in isolation. PPII helices have perfect threefold rotational symmetry and within these structures we find significant correlation between the hydrophobicity of residues at i and i + 3; thus, PPII helices in globular proteins can be considered to be amphipathic.

The human fibrinogen γ-chain C-terminal segment functions as the platelet integrin binding site as well as the Factor XIIIa cross-linking substrate and thus plays an important role in blood clot formation and stabilization. The three-dimensional structure of this segment has been determined using carrier protein driven crystallization. The C-terminal segment, γ-(398–411), was attached to a linker sequence at the C-terminus of glutathione S-transferase and the structure of this fusion protein determined at 1.8 Å resolution. Functional studies of the chimeric protein demonstrate that the fibrinogen sequence in the presence of the carrier protein retains its specific functions as ligand for platelet integrin αIIb β3 (gpIIb/IIIa) and as a cross-linking substrate for Factor XIIIa. The structure obtained for the fibrinogen γ-chain segment is not affected by crystal packing and can provide the missing links to the recently reported model of cross-linked fibrin.

Heterologous gene expression in either (1) the glycosylation-defective, mutant Chinese hamster ovary cell line, Lec3.2.8.1, or (2) the presence of the α-glucosidase inhibitor, N-butyldeoxynojirimycin facilitates the trimming of N-linked glycans of glycoproteins to single N-acetylglucosamine (GlcNAc) residues with endoglycosidase H (endo H). Both approaches are somewhat inefficient, however, with as little as 12% of the total protein being rendered fully endo H-sensitive under these conditions. It is shown here that the combined effects of these approaches on the restriction of oligosaccharide processing are essentially additive, thereby allowing the production of glycoproteins that are essentially completely endo H-sensitive. The preparation of a soluble chimeric form of CD58, the ligand of the human T-cell surface recognition molecule CD2, illustrates the usefulness of the combined approach when expression levels are low or the deglycosylated protein is unstable at low pH. The endo H-treated chimera produced crystals of space group P3121 or P3221, and unit cell dimensions a = b = 116.4 Å, c = 51.4 Å α = β = 90°, γ = 120°, that diffract to a maximum resolution of 1.8 Å.

A retinoic acid binding protein isolated from the lumen of the rat epididymis (ERABP) is a member of the lipocalin superfamily. ERABP binds both the all-trans and 9-cis isomers of retinoic acid, as well as the synthetic retinoid (E)-4-[2-(5,6,7,8)-tetrahydro-5,5,8,8-tetramethyl-2 napthalenyl-1 propenyl]-benzoic acid (TTNPB), a structural analog of all-trans retinoic acid. The structure of ERABP with a mixture of all-trans and 9-cis retinoic acid has previously been reported. To elucidate any structural differences in the protein when bound to the all-trans and 9-cis isomers, the structures of all-trans retinoic acid–ERABP and 9-cis retinoic acid ERABP were determined. Our results indicate that the all-trans isomer of retinoic acid adopts an 8-cis structure in the binding cavity with no concomitant conformational change in the protein. The structure of TTNPB-ERABP is also reported herein. To accommodate this all-trans analog, which cannot readily adopt a cis-like structure, alternative positioning of critical binding site side chains is required. Consequently, both protein and ligand adaption are observed in the formation of the various holo-proteins.

Glucosamine 6-phosphate synthase converts fructose-6P into glucosamine-6P or glucose-6P depending on the presence or absence of glutamine. The isomerase activity is associated with a 40-kDa C-terminal domain, which has already been characterized crystallographically. Now the three-dimensional structures of the complexes with the reaction product glucose-6P and with the transition state analog 2-amino-2-deoxyglucitol-6P have been determined. Glucose-6P binds in a cyclic form whereas 2-amino-2-deoxyglucitol-6P is in an extended conformation. The information on ligand-protein interactions observed in the crystal structures together with the isotope exchange and site-directed mutagenesis data allow us to propose a mechanism of the isomerase activity of glucosamine-6P synthase. The sugar phosphate isomerization involves a ring opening step catalyzed by His504 and an enolization step with Glu488 catalyzing the hydrogen transfer from C1 to C2 of the substrate. The enediol intermediate is stabilized by a helix dipole and the ε-amino group of Lys603. Lys485 may play a role in deprotonating the hydroxyl O1 of the intermediate.

The refolding of barstar, the intracellular inhibitor of barnase, is dominated by the slow formation of a cis peptidyl prolyl bond in the native protein. The triple mutant C40/82A P27A in which two cysteine residues and one trans proline were replaced by alanine was used as model system to investigate the kinetics and structural consequences of the trans/cis interconversion of Pro48. One- and two-dimensional real-time NMR spectroscopy was used to follow the trans/cis interconversion after folding was initiated by rapid dilution of the urea denatured protein. Series of 1H, 15N HSQC spectra acquired with and without the addition of peptidyl prolyl isomerase unambiguously revealed the accumulation of a transient trans-Pro48 intermediate within the dead time of the experiment. Subtle chemical shift differences between the native state and the intermediate spectra indicate that the intermediate is predominantly native-like with a local rearrangement in the Pro48 loop and in the β-sheet region including residues Tyr47, Ala82, Thr85, and Val50.

The change in heat capacity ΔCp for the folding of ribonuclease A was determined using differential scanning calorimetry and thermal denaturation curves. The methods gave equivalent results, ΔCp = 1.15 ± 0.08 kcal mol−1 K−1. Estimates of the conformational stability of ribonuclease A based on these results from thermal unfolding are in good agreement with estimates from urea unfolding analyzed using the linear extrapolation method.

We have determined the three-dimensional structure of the potassium channel inhibitor HsTX1, using nuclear magnetic resonance and molecular modeling. This protein belongs to the scorpion short toxin family, which essentially contains potassium channel blockers of 29 to 39 amino acids and three disulfide bridges. It is highly active on voltage-gated Kv1.3 potassium channels. Furthermore, it has the particularity to possess a fourth disulfide bridge. We show that HsTX1 has a fold similar to that of the three-disulfide–bridged toxins and conserves the hydrophobic core found in the scorpion short toxins. Thus, the fourth bridge has no influence on the global conformation of HsTX1. Most residues spatially analogous to those interacting with voltage-gated potassium channels in the three-disulfide–bridged toxins are conserved in HsTX1. Thus, we propose that Tyr21, Lys23, Met25, and Asn26 are involved in the biological activity of HsTX1. As an additional positively charged residue is always spatially close to the aromatic residue in toxins blocking the voltage-gated potassium channels, and as previous mutagenesis experiments have shown the critical role played by the C-terminus in HsTX1, we suggest that Arg33 is also important for the activity of the four disulfide-bridged toxin. Docking calculations confirm that, if Lys23 and Met25 interact with the GYGDMH motif of Kv1.3, Arg33 can contact Asp386 and, thus, play the role of the additional positively charged residue of the toxin functional site. This original configuration of the binding site of HsTX1 for Kv1.3, if confirmed experimentally, offers new structural possibilities for the construction of a molecule blocking the voltage-gated potassium channels.