In this work, we report that polarization second harmonic generation (PSHG) microscopy, commonly used in biomedical imaging, can quantitatively discriminate naturally aged from fresh starch-based glues used for conservation or restoration of paintings, works of art on paper, and books. Several samples of fresh and aged (7 years) flour and starch pastes were investigated by use of PSHG. In these types of adhesives, widely used in cultural heritage conservation, second harmonic generation (SHG) contrast originates primarily from the starch granules. It was found that in aged glues, the starch SHG effective orientation (SHG angle, θ) shifts to significantly higher values in comparison to the fresh granules. This shift is attributed to the different degree of granule hydration between fresh and aged adhesives. Thus noninvasive high-resolution nonlinear scattering can be employed to detect and quantify the degree of deterioration of restoration adhesives and to provide guidance toward future conservation treatments.

Fungal deterioration of frescoes was studied in situ on a selected Serbian church, and on a laboratory model, utilizing standard and newly implemented microscopy techniques. Scanning electron microscopy (SEM) with energy-dispersive X-ray confirmed the limestone components of the plaster. Pigments used were identified as carbon black, green earth, iron oxide, ocher, and an ocher/cinnabar mixture. In situ microscopy, applied via a portable microscope ShuttlePix P-400R, proved very useful for detection of invisible micro-impairments and hidden, symptomless, microbial growth. SEM and optical microscopy established that observed deterioration symptoms, predominantly discoloration and pulverization of painted layers, were due to bacterial filaments and fungal hyphal penetration, and formation of a wide range of fungal structures (i.e., melanized hyphae, chlamydospores, microcolonial clusters, Cladosporium-like conidia, and Chaetomium perithecia and ascospores). The all year-round monitoring of spontaneous and induced fungal colonization of a “mock painting” in controlled laboratory conditions confirmed the decisive role of humidity level (70.18±6.91% RH) in efficient colonization of painted surfaces, as well as demonstrated increased bioreceptivity of painted surfaces to fungal colonization when plant-based adhesives (ilinocopie, murdent), compared with organic adhesives of animal origin (bone glue, egg white), are used for pigment sizing.

In this paper the characterization of a gypsum plaster sample from the end of the 19th century simulating imperial red porphyry using a multi-analytical approach is presented and discussed. The results of X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TGA-DTA), physical and mechanical properties are summarized. In order to have further insight into the microstructure, polarized light microscopy (PLM), scanning electron microscopy coupled with energy dispersive X-ray spectrometer (SEM-EDS), and micro Raman spectroscopy analyzes were also made. They helped to clarify the main issues raised by the other complementary analytical techniques and allowed the establishment of interrelations between the different properties, providing important information about the materials, the skills, and the technological development involved in the art of imitating noble stones with gypsum pastes. This study also contributes to our knowledge concerning the preservation of these types of elements that are important in the context of European decorative arts and rarely reported in the literature.

Platelet ultrastructural alterations representing spurious activation have been identified in pathological conditions. A limitation of platelet studies is that sample preparation may lead to artifactual activation processes which may confound results, impacting the use of scanning electron microscopy as a supplemental diagnostic tool. We used scanning electron microscopy and flow cytometry to analyze platelet activation in platelet-rich plasma (PRP) and whole blood (WB) samples. PRP generated using a single high g force centrifugation, and WB samples treated with a red blood cell lysis buffer, were exposed to increasing concentrations of the agonist thrombin. Platelets in lysed WB samples responded to thrombin by elevating the activation marker CD62p definitively, with corresponding ultrastructural changes indicating activation. Conversely, CD62p expression in PRP preparations remained static. Ultrastructural analysis revealed fully activated platelets even under low concentration thrombin stimulation, with considerable fibrin deposition. It is proposed that the method for PRP production induced premature platelet activation, preventable by using an inhibitor of platelet aggregation and fibrin polymerization. Nevertheless, our results show a definitive correspondence between flow cytometry and scanning electron microscopy in platelet activation studies, highlighting the potential of the latter technique as a supplemental diagnostic tool.

This paper intends to analyze the microstructure of concrete with recycled aggregates (RA) from construction and demolition waste from various Portuguese recycling plants. To that effect, several scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analyses were performed. Various concrete mixes were evaluated in order to analyze the influence of the RA’s collection point and consequently of their composition on the mixes’ characteristics. Afterward all the mixes were subjected to the capillary water absorption test in order to quantitatively evaluate their porosity. Results from the SEM/EDS analysis were compared with those from capillary water absorption test. The SEM/EDS analysis showed that the bond capacity of aggregates to the new cement paste is greatly influenced by the RA’s nature. On the other hand, there was an increase in porosity with the incorporation of RA.

Sensory structures (sensilla) of insects are present in high number in the antennae are important for perceiving environmental cues. Thus, sensilla play an important role in the localization, discrimination, and acceptance of a possible host by parasitoid insects. The sensilla, classified according to their shape, size, and distribution, may also show sexual dimorphism in insects. The types and distribution of antennal sensilla in female and male parasitoid Trichospilus pupivorus (Ferriere, 1930) (Hymenoptera: Eulophidae) were evaluated. T. pupivorus females had longer antennae than males. Both males and females have ten sensilla types with higher abundance of placoid sensilla in females, which suggest a possible functional dimorphism.

We propose an original methodology to integrate local measurement for nontrivial object shape. The method employs the distance transform of the object and least-square fitting of numerically computed weighting functions extracted from it. The method is exemplified in the field of chemical engineering by calculating the global metal concentration in catalyst grains from uneven metal distribution profiles. Applying the methodology on synthetic profiles with the help of a very simple deposition model allows us to evaluate the accuracy of the method. For high symmetry objects such as an infinite cylinder, relative errors on global concentration are lower than 1% for well-resolved profiles. For a less symmetrical object, a tetralobe, the best estimator gives a relative error below 5% at the cost of increased measurement time. Applicability on a real case is demonstrated on an aged hydrodemetallation catalyst. Sampling of catalyst grains at the inlet and outlet of the reactor allowed conclusions concerning different reactivity for the trapped metals.

The peroxyformic process is based on the action of a carboxylic acid (mainly formic acid) and the corresponding peroxyacid. The influences of processing time (60–180 min), formic acid concentration (80–95%), temperature (60–80°C), and hydrogen peroxide concentration (2–4%) on peroxyformic pulping of agave leaves were studied by surface response methodology using a face-centered factorial design. Empirical models were obtained for the prediction of yield, κ number (KN) and pulp viscosity as functions of the aforementioned variables. Mathematical optimization enabled us to select a set of operational variables that produced the best fractionation of the material with the following results: pulp yield (26.9%), KN (3.6), and pulp viscosity (777 mL/g). Furthermore, this work allowed the description and evaluation of changes to the agave fibers during the fractionation process using different microscopic and spectroscopic techniques, and provided a comprehensive and qualitative view of the phenomena occurring in the delignification of agave fibers. The use of confocal and scanning electron microscopy provided a detailed understanding of the microstructural changes to the lignin and cellulose in the fibers throughout the process, whereas Raman spectroscopy and X-ray diffraction analysis indicated that cellulose in the pulp after treatment was mainly of type I.

We report ultrastructural features and transmission electron tomography of the dhub lizard (Uromastyx aegyptia) cornea and its adaptation to hot and dry environments. Six corneas of dhub lizards were fixed in 2.5% glutaraldehyde and processed for electron microscopy and tomography. The ultrathin sections were observed with a JEOL 1400 transmission electron microscope. The cornea of the dhub lizard is very thin (~28–30 µm). The epithelium constitutes ~14% of the cornea, whereas the stroma constitutes 80% of the cornea. The middle stromal lamellae are significantly thicker than anterior and posterior stromal lamellae. Collagen fibril (CF) diameters in the anterior stroma are variable in size (25–75 nm). Proteoglycans (PGs) are very large in the middle and posterior stroma, whereas they are small in the anterior stroma. Three-dimensional electron tomography was carried out to understand the structure and arrangement of the PG and CFs. The presence of large PGs in the posterior and middle stroma might help the animal retain a large amount of water to protect it from dryness. The dhub corneal structure is equipped to adapt to the dry and hot desert environment.

As one of the tip-based top-down nanoscale machining methods, atomic force microscopy (AFM) electric lithography is capable of directly generating flexible nanostructures on conductive or semi-conductive sample surfaces. In this work, distinct fabrication mechanisms and mechanism transition from local anodic oxidation (LAO) to electrical breakdown (BD) in the AFM nanoscale electric lithography of the highly oriented pyrolytic graphite sample surface was studied. We provide direct evidence of the transition process mechanism through the detected current–voltage (I–V) curve. Characteristics of the fabrication results under the LAO, transition, and BD regions involving the oxide growth rate or material removal rate and AFM probe wear are analyzed in detail. These factors are of great significance for improving the machining controllability and expanding its potential applications.

The aim of the present work was to investigate birefringence and morphology of the secretory-stage enamel organic extracellular matrix (EOECM), and structural and mechanical properties of mature enamel of upper incisors from adult rats that had been treated with pamidronate disodium (0.5 mg/kg/week for 56 days), using transmitted polarizing and bright-field light microscopies (TPLM and BFLM), energy-dispersive X-ray (EDX) analysis, scanning electron microscopy (SEM) and microhardness testing. BFLM showed no morphological changes of the EOECM in pamidronate and control groups, but TPLM revealed a statistically significant reduction in optical retardation values of birefringence brightness of pamidronate-treated rats when compared with control animals (p<0.01). EDX analysis showed that pamidronate-induced statistically significant decrease in phosphorus’ quantity in outer mature enamel (p<0.01) and an increase in the calcium/phosphorus ratio in that structure (p<0.05). Pamidronate did not induce ultra-structural alterations in mature enamel as revealed by SEM and did not cause a reduction in its microhardness (p>0.05). The present study indicates that pamidronate can affect birefringence of the secretory-stage EOECM, which does not seem to be associated with significant changes in morphological and/or mechanical properties of mature enamel.

Biomimetic hierarchical surface structures that exhibit features having multiple length scales have been used in many technological and engineering applications. Their surface topographies are most commonly analyzed using scanning electron microscopy (SEM), which only allows for qualitative visual assessments. Here we introduce fractal and lacunarity analyses as a method of characterizing the SEM images of hierarchical surface structures in a quantitative manner. Taking femtosecond laser-irradiated metals as an example, our results illustrate that, while the fractal dimension is a poor descriptor of surface complexity, lacunarity analysis can successfully quantify the spatial texture of an SEM image; this, in turn, provides a convenient means of reporting changes in surface topography with respect to changes in processing parameters. Furthermore, lacunarity plots are shown to be sensitive to the different length scales present within a hierarchical structure due to the reversal of lacunarity trends at specific magnifications where new features become resolvable. Finally, we have established a consistent method of detecting pattern sizes in an image from the oscillation of lacunarity plots. Therefore, we promote the adoption of lacunarity analysis as a powerful tool for quantitative characterization of, but not limited to, multi-scale hierarchical surface topographies.