Hostname: page-component-848d4c4894-wzw2p Total loading time: 0 Render date: 2024-05-15T00:18:18.344Z Has data issue: false hasContentIssue false
  • English
  • Français

Stress and microstructure evolution during initial growth of Pt on amorphous substrates

Published online by Cambridge University Press:  31 January 2011

M. A. Phillips ,
V. Ramaswamy ,
B. M. Clemens  and
W. D. Nix
M. A. Phillips
Affiliation:
Department of Materials Science & Engineering, Stanford University, Stanford, California 94305–2205
V. Ramaswamy
Affiliation:
Department of Materials Science & Engineering, Stanford University, Stanford, California 94305–2205
B. M. Clemens
Affiliation:
Department of Materials Science & Engineering, Stanford University, Stanford, California 94305–2205
W. D. Nix
Affiliation:
Department of Materials Science & Engineering, Stanford University, Stanford, California 94305–2205
Get access

Abstract

An understanding of the relationship between stress and the corresponding microstructure at various stages of thin film growth might allow prediction and control of both microstructure and film stress during thin film deposition. In the present study, a combination of in situ curvature measurement and ex situ microstructural characterization was used to make correlations between stress and microstructure for the growth of Pt on SiO2. Plan view transmission electron micrographs of Pt films with average thicknesses ranging from 3 to 35 Å show the evolution of microstructure from isolated islands to a coalesced film, in agreement with models for stress behavior during the early stages of film growth. Quantitative measurements of grain size, island size, and areal fraction covered are extracted from these micrographs and, in conjunction with an island coalescence model, used to calculate the magnitude of the tensile stresses generated during coalescence. The predicted curvature is shown to compare favorably with the measured stresses.

Type
Articles
Information
Journal of Materials Research , Volume 15 , Issue 11 , November 2000 , pp. 2540 - 2546
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Shull, A.L. and Spaepen, F., J. Appl. Phys. 80, 6243 (1996).CrossRefGoogle Scholar
2.Abermann, R., Kramer, R., and Maser, J., Thin Solid Films 52, 215 (1978).CrossRefGoogle Scholar
3.Abermann, R. and Koch, R., Thin Solid Films 129, 71 (1985).CrossRefGoogle Scholar
4.Hutchinson, J.W. (private communication).Google Scholar
5.Ramaswamy, V., Clemens, B.M., and Nix, W.D. in Mechanisms and Principles of Epitaxial Growth in Metallic Systems, edited by Wille, L.T., Burmester, C.P., Terakura, K., Comsa, G., and Williams, E.D. (Mater. Res. Soc. Symp. Proc. 528, Warrendale, PA, 1998), p. 161.Google Scholar
6.Nix, W.D. and Clemens, B.M., J. Mater. Res. 14, 3467 (1999).CrossRefGoogle Scholar
7.Udler, D. and Seidman, D.N., Phys. Rev. B: Condens. Matter 54, R11133–6 (1996).CrossRefGoogle Scholar
8.Beuth, J.L. Jr, Int. J. Solids Struct. 29, 1657 (1992).CrossRefGoogle Scholar
9.Wikström, A., Gudmundson, P., and Suresh, S., J. Mech. Phys. Solids 47, 1113 (1999).CrossRefGoogle Scholar