Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-24T03:42:28.822Z Has data issue: false hasContentIssue false
  • English
  • Français

Kinetic decomposition of Ni2SiO4 in oxygen potential gradients

Published online by Cambridge University Press:  31 January 2011

K. T. Jacob  and
A. K. Shukla
K. T. Jacob
Affiliation:
Department of Metallurgy, Indian Institute of Science, Bangalore 560 012, India
A. K. Shukla
Affiliation:
Solid State and Structural Chemistry Unit, Indian Institute of Science, Bangalore 560012, India
Get access

Abstract

Nickel orthosilicate (Ni2SiO4) has been found to decompose into its component binary oxides in oxygen potential gradients at 1373 K. Nickel oxide was formed at the high oxygen potential boundary, while silica was detected at the low oxygen potential side. Significant porosity and fissures were observed near the Ni2SiO4/SiO2 interface and the SiO2 layer. The critical oxygen partial pressure ratio required for decomposition varied from 1.63 to 2.15 as the oxygen pressures were altered from 1.01 ⊠ 105 to 2.7X 10−4 Pa, well above the dissociation pressure of Ni2SiO4. Platinum markers placed at the boundaries of the Ni2SiO4 sample indicated growth of NiO at the higher oxygen potential boundary, without any apparent transport of material to the low oxygen potential side. However, significant movement of the bulk Ni2SiO4 crystal with respect to the marker was not observed. The decomposition of the silicate occurs due to the unequal rates of transport of Ni and Si. The critical oxygen partial pressure ratio required for decomposition is related both to the thermodynamic stability of Ni2SiO4 with respect to component oxides and the ratio of diffusivities of nickel and silicon. Kinetic decomposition of multicomponent oxides, first discovered by Schmalzried, Laqua, and co-workers [H. Schmalzried, W. Laqua, and P. L. Lin, Z. Natur Forsch. Teil A 34, 192 (1979); H. Schmalzried and W. Laqua, Oxid. Met. 15, 339 (1981); W. Laqua and H. Schmalzried, Chemical Metallurgy—A Tribute to Carl Wagner (Metallurgical Society of the AIME, New York, 1981), p. 29] has important consequences for their use at high temperatures and in geochemistry.

Type
Articles
Information
Journal of Materials Research , Volume 2 , Issue 3 , June 1987 , pp. 338 - 344
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Schmalzried, H.Laqua, W. and Lin, P. L.Z. Naturforsch. Teii A 34, 192 (1979).Google Scholar
2Schmalzried, H. and Laqua, W.Oxid. Met. 15, 339 (1981).Google Scholar
3Laqua, W. and Schmalzried, H.Chemical Metallurgy–A Tribute to Carl Wagner (Metallurgical Society of the AIME, New York, 1981), p. 29.Google Scholar
4Jacob, K. T.J. Appl. Electrochem. 13, 469 (1983).Google Scholar
5Baucke, F. G. K. and Duffy, J. A.J. Electrochem. Soc. 127, 2230 (1980).CrossRefGoogle Scholar
6Windhager, H. J. and Borchardy, G.Ber. Bunsenges. Phys. Chem. 79, 115 (1975).Google Scholar
7Hallwig, D.Schachtner, R. and Sockel, G. in the Proceedings of the 9th International Symposium on the Reactivity of Solids, edited by Dyrek, K.Haber, J. and Nowotny, J. (Elsevier, Amsterdam, 1982), p. 168.Google Scholar
8Jacob, K. T.Kale, G. M.Akila, R. and Shukla, A. K.High Temp. Mat. Processes 7, 141 (1986).Google Scholar
9Martin, M. and Schmatzried, H.Ber. Bunsenges. Phys. Chem. 89, 124 (1985).CrossRefGoogle Scholar
10Schmalzried, H.Reactivity Solids 1, 117 (1986).Google Scholar
11Wolfenstine, J.Dimos, D. and Kohlstedt, D. L.J. Am. Ceram. Soc. 68, C-117 (1985).Google Scholar