Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-19T07:16:39.374Z Has data issue: false hasContentIssue false

Effect of electropulsing-ultrasonic surface treatment on the surface properties and the corrosion behavior of 45 steel–CORRIGENDUM

Published online by Cambridge University Press:  26 November 2018

Abstract

Type
Corrigendum
Copyright
Copyright © Materials Research Society 2018 

doi: 10.1557/jmr.2016.126, Published by Materials Research Society with Cambridge University Press, 16 May 2016.

In the original publication of this article, Figs. 6(a) and 6(b) were missing a portion of the specimen figure. The corrected figure is shown below.

FIG. 6. The surface morphology of 45 steel specimens obtained by 3D digital microscope (a) optical surface image after turning, (c) three-dimension surface morphology image after turning, (b) optical surface image treated by EUST, and (d) three-dimension surface morphology image treated by EUST.

The authors regret this error.

References

REFERENCE

Zhang, B., Wang, H., Zhang, S., Song, G., Kure-Chu, S-Z., Wang, X., Kuang, J., and Tang, G.: Effect of electropulsing-ultrasonic surface treatment on the surface properties and the corrosion behavior of 45 steel. J. Mater. Res. 31, 21142124 (2016). doi: 10.1557/jmr.2016.126.CrossRefGoogle Scholar
Figure 0

FIG. 6. The surface morphology of 45 steel specimens obtained by 3D digital microscope (a) optical surface image after turning, (c) three-dimension surface morphology image after turning, (b) optical surface image treated by EUST, and (d) three-dimension surface morphology image treated by EUST.