Hostname: page-component-7bb8b95d7b-dtkg6 Total loading time: 0 Render date: 2024-09-12T11:31:09.122Z Has data issue: false hasContentIssue false
  • English
  • Français

The effect of fiber orientation on matrix plasticity and fracture behavior of SiC fiber-reinforced titanium matrix composites

Published online by Cambridge University Press:  03 March 2011

Hsing-Pang Chiu ,
S.M. Jeng  and
J-M. Yang
Hsing-Pang Chiu
Affiliation:
Department of Materials Science and Engineering, University of California-Los Angeles, Los Angeles, California 90024–1595
S.M. Jeng
Affiliation:
Department of Materials Science and Engineering, University of California-Los Angeles, Los Angeles, California 90024–1595
J-M. Yang
Affiliation:
Department of Materials Science and Engineering, University of California-Los Angeles, Los Angeles, California 90024–1595
Get access

Abstract

The effect of fiber orientation on the matrix plasticity and fracture behavior of SCS-6 fiber-reinforced Ti-15V-3Al-3Cr-3Sn composites was studied. The laminates used in this study were [0]6, [0/±45]s, and [90/±45]s. Three-point bending tests were conducted on chevron-notched specimens to determine the crack initiation energy, fracture toughness, and fracture strength as a function of notch length. The critical energy release rate was determined from the slope of the crack initiation energy versus notch length curve. The damage evolution and development of the matrix plastic deformation zone at the notch tip during the crack initiation and propagation as a function of fiber orientation were also determined. The relationships among the crack-tip matrix plastic deformation zone size, the critical energy release rate, and notch strength of the composites were discussed.

Type
Articles
Information
Journal of Materials Research , Volume 9 , Issue 7 , July 1994 , pp. 1767 - 1779
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Jeng, S. M., Yang, J-M., and Yang, C. J., Mater. Sci. Eng. A138, 181 (1991).CrossRefGoogle Scholar
2Jeng, S. M., Alassoeur, P., and Yang, J-M., Mater. Sci. Eng. A154, 11 (1992).CrossRefGoogle Scholar
3Yang, J-M. and Jeng, S. M., JOM, June, 52 (1992).CrossRefGoogle Scholar
4Hoover, W. R., J. Comp. Mat. 10 (4), 106 (1976).CrossRefGoogle Scholar
5Broek, D., Elementary Engineering Fracture Mechanics, 4th ed. (Martinus Nijhoff Publishers, Dordrecht, The Netherlands, 1986), p. 85.Google Scholar
6Taynopol'skii, Y. M. and Kinds, T., Static Test Methods for Composites (Van Nostrand Reinhold Company, 1981), p. 237.Google Scholar
7Lerch, B. A., Matrix Plasticity in SiC/Ti-15-3 Composite, NASA TM-103760 (1990).Google Scholar
8Majumdar, B. S. and Newaz, G. M., Inelastic Deformation of Metal Matrix Composites—Plasticity and Damage Mechanisms, NASA CR-189095 and 189096 (1993).Google Scholar