Hostname: page-component-848d4c4894-pjpqr Total loading time: 0 Render date: 2024-07-01T15:12:51.541Z Has data issue: false hasContentIssue false
  • English
  • Français

A 40 Gbps electro-absorption modulator integrated laser modeling method for optical transmitter in ultra-wide band radio-over-fiber systems

Published online by Cambridge University Press:  18 January 2010

Frédérique Deshours ,
Anne-Laure Billabert ,
Catherine Algani ,
Fabrice Blache ,
Christian Rumelhard  and
Georges Alquié
Frédérique Deshours*
Affiliation:
Laboratoire d’Électronique et Électromagnétisme L2E, UPMC UniversitéParis 06, Paris, France. Phone: +33 (0) 1 44 27 74 59; Fax: +33 (0) 1 44 27 62 14.
Anne-Laure Billabert
Affiliation:
Conservatoire National des Arts et Métiers CNAM, Laboratoire d’Électronique, SYstèmes de Communications et Microsystèmes ESYCOM, Paris, France.
Catherine Algani
Affiliation:
Conservatoire National des Arts et Métiers CNAM, Laboratoire d’Électronique, SYstèmes de Communications et Microsystèmes ESYCOM, Paris, France.
Fabrice Blache
Affiliation:
Alcatel-Thales III-V Lab, a joint lab: Bell Labs and Thales Research & Technology, Marcoussis, France.
Christian Rumelhard
Affiliation:
Conservatoire National des Arts et Métiers CNAM, Laboratoire d’Électronique, SYstèmes de Communications et Microsystèmes ESYCOM, Paris, France.
Georges Alquié
Affiliation:
Laboratoire d’Électronique et Électromagnétisme L2E, UPMC UniversitéParis 06, Paris, France. Phone: +33 (0) 1 44 27 74 59; Fax: +33 (0) 1 44 27 62 14.
*
Corresponding author: F. Deshours Email: frederique.deshours@upmc.fr
Get access Rights & Permissions [Opens in a new window]

Abstract

The great interest of optical fiber links in communicating systems especially in ultra-wide band (UWB) communications has grown up in the last decade and requires co-simulation for mixed circuits design exploiting both optical and microwave domains. In this paper, we report an original modeling method of an electro-absorption modulator associated with a distributed-feedback laser to simulate an optical transmitter of an UWB over fiber system. Large signal optoelectronic device models can be developed and implemented in a high-frequency simulator, such as advanced design system-Ptolemy to analyze the performances of fiber radio links and study the impact of the transmitter characteristics. This specific simulation way, taking into account precisely electrical characteristics of both electrical and optical circuits, links two different frequency domains by coupling electrical and optical modules in the same system simulator. Therefore, a complete simulation of an UWB multi-band orthogonal frequency division multiplexing signal transmission over fiber with an external modulator is investigated.

Keywords

Electro-absorption modulatorDistributed-feedback laserRadio-over-fiberUltra-wide bandMulti-band orthogonal frequency division multiplexing
Type
Original Article
Information
International Journal of Microwave and Wireless Technologies , Volume 1 , Special Issue 6: 2009 National Microwave Days in France , December 2009 , pp. 511 - 519
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Hur, S.; Nam, S.; Lee, H.; Hwang, S.; Oh, Y.; Jeong, J.: Performance evaluation of electroabsorption modulators as optical transceivers in radio-over-fiber systems by FDTD method. J. Lightwave Technol., 24 (12) (2006), 4953–4958, doi: 10.1109/JLT.2006.884565.CrossRefGoogle Scholar
[2]Kim, J.; Kang, Y.S.; Chung, Y.D.; Choi, K.S.: Development and RF characteristics of analog 60-GHz electroabsorption modulator module for RF/optic conversion. IEEE Trans. Microw. Theory Tech., 54 (2) (2006), 780–787, doi: 10.1109/TMTT.2005.863067.Google Scholar
[3]Seeds, A.J.: Microwave photonics. IEEE Trans. Microw. Theory Tech., 50 (3) (2002), 877–887, doi: 10.1109/22.989971.CrossRefGoogle Scholar
[4]Kitayama, K.I.: Architectural considerations of radio-on-fiber millimetre-wave wireless access systems, in URSI Int. Symp., 29 September–2 October 1998, 378–383, doi: 10.1109/ISSSE.1998.738101.CrossRefGoogle Scholar
[5]Loyez, C. et al. : A radio over multimode system based on a LO phase-noise cancellation for 60-GHz WLAN, in European Microwave Conf., 4–6 October 2005, vol. 1, doi: 10.1109/EUMC.2005.1608943.CrossRefGoogle Scholar
[6]Kurniawan, T.; Nirmalathas, A.; Lim, C.; Novak, D.; Waterhouse, R.: Performance analysis of optimized millimeter-wave fiber radio links. IEEE Trans. Microw. Theory Tech., 54 (2) (2006), 921–927, doi: 10.1109/TMTT.2005.863047.CrossRefGoogle Scholar
[7]Kuri, T., Kitayama, K.I.: Optical heterodyne detection of millimeter-wave-band radio-on-fiber signals with a remote dual-mode local light source. IEEE Trans. Microw. Theory Tech., 49 (10) (2001), 2025–2029, doi: 10.1109/22.954825.CrossRefGoogle Scholar
[8]Cabon, B.; Nguyen, G.: UWB over fibre in mm-waves using upconversion technique. Proc. Eur. Microw. Assoc., 4 (2008), 206–212.Google Scholar
[9]Le Guennec, Y.; Gary, R.: Optical frequency conversion for millimeter-wave ultra-wideband-over-fiber systems. Photonics Technol. Lett., 19 (13) (2007), 996–998, doi: 10.1109/LPT.2007.898745.CrossRefGoogle Scholar
[10]Sricham, P.; Rangsee, P.; Worasucheep, D.R.: A 2.5 Gb/s electro-absorption modulator integrated laser optical transmitter in long-haul dense wavelength division multiplexing transmission, in Proc. ECTI-CON 2008, 14–17 May 2008, vol. 1, 253–256, doi: 10.1109/ECTICON.2008.4600420.CrossRefGoogle Scholar
[11]Lim, C.G.: Electro-absorption modulator integrated lasers with enhanced signal injection efficiency. J. Lightw. Technol., 26 (6) (2008), 685–691, doi: 10.1109/JLT.2007.915275.CrossRefGoogle Scholar
[12]Yamanaka, T.; Fukano, H.; Saitoh, T.: Lightwave-microwave unified analysis of electroabsorption modulators integrated with RF coplanar waveguides. IEEE Photonics Technol. Lett., 17 (12) (2005), 2562–2564, doi: 10.1109/LPT.2005.859164.CrossRefGoogle Scholar
[13]Prosyk, K. et al. : Low loss, low chirp, low voltage, polarization independent 40 Gb/s bulk electro-absorption modulator module, in Optical Fiber Communications Conf., 23–28 March 2003, vol. 1, 269–270.Google Scholar
[14]Zhang, L.M.; Carroll, J.E.: Large-signal dynamic model of the DFB laser. IEEE J. Quantum Electron., 28 (3) (2002), 604–611, doi: 10.1109/3.124984.CrossRefGoogle Scholar
[15]Lee, J.; Nam, S.; Lee, S.H.; Jeong, J.: A complete small-signal equivalent circuit model of cooled butterfly-type 2.5 Gbps DFB laser modules and its application to improve high frequency characteristics. IEEE Trans. Adv. Packag., 25 (4) (2002), 543–548, doi: 10.1109/TADVP.2002.807562.Google Scholar
[16]Li, G.L.; Yu, P.K.L.; Chang, W.S.C.; Loi, K.K.; Sun, C.K.; Pappert, S.A.: Concise RF equivalent circuit model for electroabsorption modulators. Electron. Lett., 36 (9) (2000), 818–820.CrossRefGoogle Scholar
[17]Lewén, R.; Irmscher, S.; Eriksson, U.: Microwave CAD circuit modelling of a travelling-wave electroabsorption modulator. IEEE Trans. Microw. Theory Tech., 51 (4) (2003), 1117–1128, doi: 10.1109/TMTT.2003.809669.CrossRefGoogle Scholar
[18]Bdeoui, A.; Billabert, A.L.; Polleux, J.L.; Algani, C.; Rumelhard, C.: Definition of both opto-microwave S parameters and noise figures for the elements of an IMDD microwave photonic link, in 12th Microcoll Conf., Mobile Optical Wireless Week, Budapest, Hungry, 14–18 May 2007.Google Scholar
[19]Deshours, F.; Algani, C.; Blache, F.; Alquié, G.; Kazmierski, C.; Jany, C.: Modélisation non linéaire d’un modulateur à électro-absorption intégré à haut débit, in 19ème Colloque Int. Optique Hertzienne et Diélectriques, Valence, France, 5–8 September 2007.Google Scholar
[20]Girondin, V.; Deshours, F.; Alquié, G.; Algani, C.; Billabert, A.L.; Blache, F.: Simulation d’un modulateur à électro-absorption intégré à un laser DFB pour la transmission de signaux ULB par voie optique, in 16ème Journées Nationales Micro-ondes (JNM’2009), Grenoble, France, 27–29 May 2009.Google Scholar
[21]Zhu, N. et al. : Electrical and optical coupling in an electroabsorption modulator integrated with a DFB Laser. IEEE J. Quantum Electron., 43 (7) (2007), 535–544, doi: 10.1109/JQE.2007.897925.CrossRefGoogle Scholar
[22]Bdeoui, A.; Billabert, A.-L.; Polleux, J.-L.; Algani, C., Rumelhard, C.: A new definition of opto-microwave S parameters and noise figures for a IM-DD microwave photonic link, in Proc. European Microwave Association, September 2008, vol. 4, 212–220.Google Scholar
[23]Dellier, S. et al. : 40 GHz MMIC driver of electro-absorption modulator for high-speed optical pulse generation, in Microwave Symp. Digest, 2003 IEEE MTT-S International, 8–13 June 2003, vol. 2, 1347–1350.Google Scholar
[24]Le Guennec, Y.; Lourdiane, M.; Cabon, B.; Maury, G.; Lombard, P.: Technologies for UWB-over-fiber, in Lasers and Electro-Optics Society, LEOS 2006, 19th Annual Meeting of the IEEE, Montréal, Quebec, Canada, 29 October–2 November 2006, doi: 10.1109/LEOS.2006.278747.CrossRefGoogle Scholar
[25]Paquelet, S.; Aubert, L.M.; Uguen, B.: An impulse radio asynchronous transceiver for high data rates, in International Workshop on Ultra Wideband Systems, IEEE Joint UWBST & IWUWBS, 18–21 May 2004, 1–5, doi: 10.1109/UWBST.2004.1320888.CrossRefGoogle Scholar
[26]Van Nee, R.; Prasad, R.: OFDM for Wireless Multimedia Communications, Artech House Publishers, 2000.Google Scholar
[27]Batra, A.; Balakrishnan, J.: Improvements to the multi-band ofdm physical layer, in Consumer Communications and Networking Conf., CCNC 2006, 8–10 January 2006, vol. 2, 701–705.Google Scholar