In this work our purposes are (1) geochemical characterization of loess (‘primary loess’ or ‘true loess’ and ‘secondary loess’ or ‘loess-like deposits’) located in the centre of the Iberian Peninsula, (2) systematic study of element behaviour during pedogenesis and (3) evaluation of the suitability of using the geochemistry of loess to establish the average composition of these discontinuous aeolian sedimentary covers in central Spain. Several analyses were carried out on the bulk sample and on the sandy and clay fractions (mineralogical composition by X-ray diffraction, mineralogical studies of heavy minerals by petrographical microscopy and chemical composition by flame atomic absorption spectrometry). Loess from the Spanish central region has a local origin. The presence of gypsum in the ‘loess-like’ deposits reaches values two times higher than in ‘true loess’, and ‘true loess’ has a higher concentration of quartz, calcite and kaolinite. Regarding chemical composition, similar concentrations of Ca, K, Mg and Na were found, although it is important to note the higher concentration of Na in some of the samples.

The Gondwana–Laurussia convergence process can be explored by studying the Middle Mississippian (Viséan) palynoflora of northwest Africa. Statistical analysis of the Viséan miospore assemblages reported from Morocco defines two populations, one with clear Laurussian affinity from the northern margin of the Western Meseta, and the other, more Gondwanan in composition, from the southern part of the Western Meseta and Anti-Atlas. Moreover, no transitional assemblages have been described from the region. These palynofloral variations are a consequence of the complex palaeogeography of the northwest African margin, which was controlled by the Variscan Orogeny during Viséan times. Taking into consideration the palynofloral affinity of the miospore assemblages reported throughout the entire North African margin and the Middle East, it is possible to envisage a Late Carboniferous Pangaea amalgamation process initially evolving from the west, while in the east the ocean separating Gondwana and Laurussia persisted as an effective barrier to floral migration.

Abundant sulphur is present in the Late Miocene evaporitic sequence of the lacustrine Hellín basin in SE Spain. Weathering of Triassic evaporites controlled the chemical composition of the Miocene lake. The lacustrine deposits comprise gypsum, marlstones, diatomites and carbonate beds. Sulphur-bearing carbonate deposits predominantly consist of early diagenetic dolomite. Abundant dolomite crystals with a spheroidal habit are in accordance with an early formation and point to a microbial origin. The carbon isotopic composition of the dolomite (δ13C values between −10 and −4‰) indicates mixing of lake water carbonate and carbonate derived from the remineralization of organic matter by heterotrophic bacteria. Dolomite precipitated syngenetically under evaporitic conditions as indicated by high oxygen isotope values (δ18O between +6 and +11‰). Nodules of native sulphur are found in gypsum, carbonate beds and marlstone layers. Sulphur formed in the course of microbial sulphate reduction, as reflected by its strong depletion in 34S (δ34S values as low as −17‰). Near to the surface many of the sulphur nodules were in part or completely substituted by secondary gypsum, which still reflects the sulphur isotopic composition of native sulphur (−18 to −10‰). This study exemplifies the role of bacterial sulphate reduction in the formation of dolomite and native sulphur in a semi-enclosed lacustrine basin during Late Miocene time.

A sedimentological investigation of the Neogene deposits of the Zagros foreland basin in SW Iran reveals a continuous and largely gradational passage from supratidal and sabkha sediments at the base (represented by the Gachsaran Formation) to carbonates and marine marls (Mishan Formation with basal Guri carbonate member) followed by coastal plain and meandering river deposits (Agha Jari Formation) and finally to braided river gravel sheets (Bakhtyari Formation). This vertical succession is interpreted to represent the southward migration of foreland basin depozones (from distal foredeep and foredeep to distal wedge-top and proximal wedge-top, respectively) as the Zagros fold–thrust belt migrated progressively southward towards the Arabian foreland. This vertical succession bears a striking similarity to modern depositional environments and sedimentary deposits observed in the Zagros region today, where one passes from mainly braided rivers in the Zagros Mountains to meandering rivers close to the coast, to shallow marine clastic sediments along the northern part of the Persian Gulf and finally to carbonate ramp and sabkha deposits along the southeastern coast of the Persian Gulf. This link between the Neogene succession and the modern-day depositional environments strongly suggests that the major Neogene formations of the Zagros foreland basin are strongly diachronous (as shown recently by others) and have active modern-day equivalents.

Carbon- and oxygen-isotope ratios are commonly used to correlate shallow- and deep-marine successions. Carbon- and oxygen-isotope analyses were performed on bulk-carbonate samples from two Kimmeridgian sections of the Swiss Jura platform in order to correlate them with biostratigraphically well-dated coeval sections in the adjacent basin. On the platform, a general decrease in δ13C and δ18O values from the base to the top of the studied interval is measured, whereas time-equivalent pelagic–hemipelagic carbonates record an increase in carbon- and oxygen-isotope ratios. Moreover, the measured δ13C and δ18O values are generally lower than those indicated for the Kimmeridgian open ocean and show high-frequency variations superimposed on the general trend. Samples were screened for diagenetic alteration using optical and cathodoluminescence petrography and coupled carbon- and oxygen-isotope and trace-element analyses. Some observations favour a role for diagenetic alteration, but isotopic and elemental trends as well as sedimentological evidence suggest that the more negative values of δ13C and δ18O relative to Kimmeridgian seawater are also due to local environmental conditions. High-frequency changes in δ18O and δ13C values most likely result from variations in salinity and carbonate production and accumulation rates. These variations were produced by different water masses that were isolated from the open ocean and developed their own geochemical signatures. Repeated isolation was induced by high-frequency sea-level fluctuations and helped by irregular platform morphology. Consequently, carbon- and oxygen-isotope records in shallow-marine carbonates can be used for stratigraphic correlation only if their origin is well known.

The upper Wenlock Series (Homerian Stage) of the northern Midland Platform, England, contains numerous volcanic bentonite clay layers. At Wren's Nest Hill, Dudley, 15 bentonites have been investigated and comparisons with the type-Wenlock have been made by means of two key sections along Wenlock Edge, Shropshire. In total 22 bentonites have been investigated and their clay and sand-grade mineralogies determined. Rare earth element (REE) and yttrium concentrations of apatite grains contained within ten of the bentonites have been established allowing geochemical fingerprinting as an indication of provenance of source magmas and identification of geochemical marker beds. Based on the analysis of REE and yttrium concentrations it seems likely that the majority of these bentonites originated from a granodiorite magmatic source. Comparisons with published Llandovery and lower Wenlock age bentonites indicate generally more enrichment in light REEs relative to heavy REEs. In addition, close geochemical similarities between bentonites along Wenlock Edge and at Wren's Nest Hill strongly argue for their presence as precise stratigraphic equivalents within the upper Much Wenlock Limestone Formation. These correlations are further supported by geophysical data from borehole wire-line logs across the West Midlands. Finally, a chemically distinct mid-Homerian episode of volcanism is identified and represents a potentially important marker interval between the study area and other similarly aged bentonites reported from the Island of Gotland, Sweden.

We present and use seismic images to constrain possible scenarios for the evolution of the Middle Miocene Gachsaran Formation in the Central Iranian Zagros during the Neogene folding. This evaporitic sequence plays an important role in sealing the Oligocene–Miocene Asmari reservoirs in the Dezful Embayment and offshore regions. It was deposited in the flexural basin south of the Mountain Front Fault, during the progressive southwestward propagation of the Zagros folding. Its thickness changes very rapidly from several hundred to more than 4000 m. This thickness variation is related to faulting, folding and flow. Seismic and subsurface data show that the Gachsaran evaporite sequence is a major disharmonic level in the Dezful Embayment and shallow, molassic synclines often overlie anticlinal axes at depth. The lithological composition of the Gachsaran Formation is mainly a combination of salt, shale and anhydrite, which have a high interval velocity contrast. Anomalous velocity behaviours of these sedimentary units after deformation affect the seismic quality of the surrounding area, especially the southern flank of the main anticline structures.

The Miocene–Quaternary Trans-Mexican Volcanic arc is thought to have grown southwards (i.e. trenchward) since the Pliocene. This theory is mainly supported by roughly N–S-directed polygenetic volcanic ranges along which volcanic activity migrates southwards with time. We investigated the eruptive history of one of these ranges, the Sierra Nevada (east boundary of Mexico City basin), by compiling literature ages and providing new K–Ar dates. Our K–Ar ages are the first ones for the northernmost Tláloc and Telapón volcanoes and for the ancestral Popocatépetl (Nexpayantla). The obtained ages reveal that the four stratovolcanoes forming the range worked contemporaneously during most of the Middle to Late Pleistocene. However, taking into account the onset of the volcanic activity, a southward migration is evidenced along the Sierra Nevada: volcanism initiated at its northern tip at least 1.8 Ma ago at Tláloc volcano, extended southwards 1 Ma ago with Iztaccíhuatl and appeared at its southern end 329 ka ago with the Nexpayantla cone. Such a migration would be most probably primarily driven by Cocos slab roll-back and steepening rather than by regional crustal tectonics, which played a secondary role by controlling the apparent alignment of the volcanoes.

Y. Cai & H. Hua comment: Zhuravlev, Gámez Vintaned & Ivantsov (2009) reported the problematic Ediacaran fossil Gaojiashania annulucosta in Siberia and they considered that this is the first find of Gaojiashania outside China, since Gaojiashania had previously only been reported from the Gaojiashan Member of the middle Dengying Formation in the Ningqiang area, southern Shaanxi Province, South China. However, we believe that the so-called Siberian Gaojiashania was mis-identified, and what was described as Gaojiashania annulucosta by Zhuravlev, Gámez Vintaned & Ivantsov (2009) is more appropriately ascribed to Shaanxilithes ningqiangensis, another problematic Ediacaran fossil that has also been known from the Gaojiashan Member in Shaanxi Province of South China (Chen, Chen & Lao, 1975; Xing et al. 1984), as well as the stratigraphically equivalent Taozichong Formation in Guizhou Province (Hua, Chen & Zhang, 2004) and the Jiucheng Member (Dengying Formation) in Yunnan Province of South China (Zhu & Zhang, 2005), the Zhoujieshan Formation in Qinghai Province (Shen et al. 2007), and the Zhengmuguan Formation in Ningxia Hui Autonomous Region of North China (Shen et al. 2007).

The Carboniferous Billefjorden rift basin is a well-known example of a suite of Carboniferous basins on the Barents Shelf and NE Greenland. The basin has a clastic, carbonate and evaporite fill with complex and disputed stratigraphic relationships, especially regarding the Ebbadalen and Minkinfjellet formations. Geometrically, the basin is considered a simple half-graben. A N–S-trending fault and monocline structure within the northern portion of the basin, the Løvehovden fault, has lithological and thickness differences across it within the Minkinfjellet and possibly Ebbadalen formations. The fault shows W-side-down movement, defining a sub-basin within the larger half-graben. Significant along-strike changes occur. Down-throw to the west is at least 150 metres and possibly 400 metres, as shown by across-fault thickness differences of Ebbadalen and/or Minkinfjellet formations. To the east of the fault, the contact between the Ebbadalen and Minkinfjellet formations is a disconformity with significant local relief, and is interpreted to represent exposure from footwall uplift, and associated near- or at-surface solution, producing basal stratiform breccias. A similar contact is not exposed west of the fault. Monoclinal deformation and thickening of the younger Wordiekammen Formation above and across the monocline constrain a later movement component. Kinematic data and the structural style clearly indicate the Løvehovden fault is a normal fault with associated tri-shear zone development, consistent with the regional Carboniferous rift setting. Earlier interpretations describe the Løvehovden fault and monocline as Tertiary contractional features. In contrast, our work advocates that they are an important architectural basin element, defining a sub-basin within the Billeforden Trough during Minkinfjellet Formation deposition, with insignificant, if any, Tertiary reactivation. The Løvehovden fault is aligned with and represents the southern termination of the Lemströmfjellet fault to the north. Thus, the Billefjorden basin changes from a narrow graben to a broader half-graben to the south. These along-strike changes have important implications for the stratigraphic architecture of the basin, and for palaeogeographic reconstructions. These results and application of 3-D models for extension related tri-shear zones may help inform interpretation of other Carboniferous basins on the Barents Shelf.

Most carbonate fractured reservoirs display complex behaviour in the simulation and production stages of their development, and this complexity is thought to be the result of the different fracture distributions and intensities within the reservoir. Accurate fracture characterization is therefore essential and the two techniques most commonly used for fracture prediction are ‘strain analysis’ and ‘curvature analysis’. In this paper these two methods of fracture analysis are compared by applying them to the Gachsaran oil field in the Zagros folded belt and comparing the predictions of the two with the performance history of the reservoir. This reservoir is well suited for such a study as there is a large quantity of seismic data and over 350 wells have been drilled. Fracture intensity indicator maps have been produced using both methods and the results compared with production index data from the wells. The indicator map produced using the 3D strain analysis method in which special attention was given to the structural setting, structural evolution and the position of the fractures with respect to the local stress orientation, was found to be more compatible with the production index data than the map produced using the method of curvature analysis. In addition, the study also demonstrates that one of the great advantages of strain analysis compared to the curvature method is its ability to predict variations in the vertical direction and thus provide data related to a reservoir volume rather than simply to a surface.

The fragmentary pterosaur material from the Campanian Grünbach Formation (Gosau Group) of Muthmannsdorf (Austria), previously identified as Ornithocheirus buenzeli Bunzel, 1871, is revised. A lower jaw fragment shows a helical type of articulation, which is known in several families of pterosaurs, and cannot be identified with great accuracy. The proximal part of a humerus shows distinctive features that allow it to be referred to as a member of the family Azhdarchidae, which is widespread in the Late Cretaceous Period of Europe. Ornithocheirus buenzeli is considered a nomen dubium. The pterosaur material from the Grünbach Formation cannot be used as evidence for the presence of ornithocheirids in the Late Cretaceous of Europe.

An intensely deformed gneiss–migmatite terrane and a relatively undeformed granulite–granitoid terrane constitute the bulk of Precambrian basement in the northwestern Indian Shield. This article traces the structural evolution in the gneiss–migmatite terrane, where traditional methods of structural analysis are difficult to apply, and shows how successively developed folds can assume identical geometry and orientation at an advanced stage of progressive ductile shearing. The gneiss–migmatite terrane exemplifies a regional-scale ductile shear zone that preserves the history of polyphase folding and sheath folding. Geometrical similarity between individual/domain-scale sheath folds and mesoscopic/regional-scale folds implies that sheath folding is common at all scales in the gneiss–migmatite terrane. As the mylonite foliation that traces successive folds is curviplanar, the successively initiated hinge lines were curvilinear from their inception in the shear zone. At the advanced stage of ductile shearing, the hinge line curvatures were accentuated due to their rotation towards subvertically directed maximum stretching (X), and variably oriented fold axial planes were brought into approximate parallelism with the upright principal plane (XY) of the bulk strain ellipsoid. Eventually all the folds, irrespective of their relative order of development, became strongly non-cylindrical, extremely tight, isoclinal and approximately co-planar with respect to each other. It is due to the above geometrical modifications during ductile shearing that folds, irrespective of their order of development, now appear identical with respect to isoclinal geometry, axial plane orientation and hinge line curvilinearity. Evidence from the fold orientations, the deformed lineation patterns and the sheath fold geometry suggest that the shearing occurred in a general shear type of bulk strain, and NNW–SSE-directed subhorizontal compression resulted in subvertically directed stretching in the gneiss–migmatite terrane.

3D modelling of geological structures is a key method to improve the understanding of the geological history of an area, and to serve as a drive for exploration. Geomodelling has been performed on a large 60000 km2 area of the Zagros fold-and-thrust belt of Iran, to reconcile a vast but heterogeneous dataset. Topography, geological surface data and dips, outcrop surveys, and well and seismic data were integrated into the model. The method was to construct a key surface maximizing the hard data constraints. The Oligo-Miocene Top Asmari layer was chosen, as this formation was regionally deposited before the main Zagros collision phase and because the numerous outcrops allow proper control of the bed geometry in the fold cores. Interpreted seismic data have been integrated to interpolate the surfaces at depth within the synclines. Several conceptual models of fold geometry have been applied to estimate the best way to convert seismic time signal to depth. Several deeper horizons down to Palaeozoic strata were deduced from this key horizon by applying palaeo-thickness maps. During the construction, the 3D interpolated surfaces could be reconverted to time, using a velocity model, and compared with previous seismic interpretations. This exercise obliged us to revise some early interpretations of seismic lines that were badly tied to wells. The 3D modelling therefore clearly improves regional interpretation. In addition, the 3D model is the only tool that allows drawing consistent cross-sections in areas where there are no seismic lines. Emerging Hormuz salt diapirs were added to the model. Dimensions and shapes of the individual diapirs were modelled using a statistical survey on the cropping out Hormuz structures. Modelling reliably demonstrated that the diapirs, when piercing, show a constant mushroom shape whose diameter depends on the stratigraphic depth of observation. This observation allowed us to exemplify relations between the pre-existing diapirs and the anticlines of the area, and to highlight the morphological changes from the inner onshore areas to the coastal and offshore areas. In addition, one of the surprising results of this study was the observation of the increasing diameter of the diapirs at the time of the Zagros collision and folding event, with growth strata and overhangs on the flanks of the diapirs.

The hot emplacement of the Ronda peridotites (Betic Cordilleras) developed a dynamothermal aureole and partial melts that led to the intrusion of granite dykes in the peridotites. Previous geochronological data place rather broad limits for this event between 22 and 19 Ma. Analyses of neocrystalline zircon rims from large zircon populations yield a U–Pb SHRIMP age of 22.3±0.7 Ma for the dynamothermal aureole formation, and intrusion ages of granite dykes between 22.6±1.8 and 21.5±3.8 support that conclusion. Therefore, these new ages provide a more robust constraint on the hot emplacement of the Ronda peridotites at middle crustal levels.

High-precision SHRIMP U–Pb zircon dating yields a late Palaeoarchaean age (3290 ± 8.6 Ma) for a large, unmetamorphosed, weakly peraluminous TTG body (the Keonjhargarh–Bhaunra pluton) in the Singhbhum craton of eastern India. One inherited subhedral zircon grain gave a concordant age of 3495.9 ± 5.3 Ma and Nd isotope characteristics show a juvenile trend with εNdt ~ 0 and TDM 3395–3453 Ma. The data support a model of typical Archaean crustal evolution until late Palaeoarchaean times for the Singhbhum craton, which is in contrast to the more southerly Bastar craton where Palaeoarchaean non-TTG granites have been identified. These data demonstrate the diachronous development of continental crustal blocks now forming the basement of the eastern and central peninsular of India.