Hostname: page-component-77c89778f8-n9wrp Total loading time: 0 Render date: 2024-07-17T04:47:49.687Z Has data issue: false hasContentIssue false
  • English
  • Français

A review of current analysis capabilities applicable to the high frequency vibration prediction of aerospace structures

Published online by Cambridge University Press:  04 July 2016

R.S. Langley  and
N.S. Bardell
R.S. Langley
Affiliation:
Department of Aeronautics and Astronautics , University of Southampton Southampton, UK
N.S. Bardell
Affiliation:
Department of Aeronautics and Astronautics , University of Southampton Southampton, UK
Get access Rights & Permissions [Opens in a new window]

Abstract

Many situations arise in which aerospace structures are subjected to high frequency excitation, in the sense that the wavelength of the induced dynamic response is much shorter than the overall dimensions of the structure. The application of the conventional finite element method to this type of problem faces two difficulties: (i) the short wavelength of the structural deformation requires the use of many elements, which renders the method computationally expensive or even impracticable, and (ii) the response of the structure at high frequencies can be very sensitive to structural detail, and thus response predictions for an ‘ideal’ structure may differ significantly from the performance of the actual system. For a number of years research effort has been directed towards the development of alternative analysis methods for high frequency vibrations, and recent developments in this area are reviewed in the present paper. The methods considered are: (i) hierarchical versions of the finite element method, (ii) the dynamic stiffness method, (iii)periodic structure theory, (iv)statistical energy analysis and (v) wave intensity analysis.

Type
Research Article
Information
The Aeronautical Journal , Volume 102 , Issue 1015 , May 1998 , pp. 287 - 297
Copyright
Copyright © Royal Aeronautical Society 1998 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Zienkiewicz, O.C. The Finite Element Method, Third Edition, McGraw-Hill, 1977.Google Scholar
2. Roozen, N.B. Quiet by Design: Numerical Acousto-Elastic Analysis of Aircraft Structures, 1992, PhD Thesis, Technical University of Eindhoven.Google Scholar
3. Kompella, M.S. and Bernhard, B.J. Measurement of the statistical variation of structural-acoustic characteristics of automotive vehicles,Proceedings of the SEA Noise and Vibration Conference, Warrendale,USA: Society of Automotive Engineers, 1993.Google Scholar
4. The Independent, April 1995.Google Scholar
5. MSC/Nastran Application Manual for the McNeal-Schwendler Corporation, Version 66, 1993.Google Scholar
6. Turner, M.J., Clough, R.W. Martin, H.C. and Topp, L.J. Stiffness and deflection analysis of complex structures, J Aeronaut Science, 1956, 23, pp 805–823.Google Scholar
7. GALLAGHER, R.H. Finite Element Analysis — Fundamentals, Prentice Hall, 1976.Google Scholar
8. Meirovitch, L.L. Elements of Vibration Analysis, McGraw-Hill,Second Edition, 1986.Google Scholar
9. Zienkiewicz, O.C., Irons, B.M., Scott, F.E. and Campbell, J.S. Three dimensional stress analysis, IUTAM Symposium of High Speed Computing of Elastic Structures, Liege, 1970, pp 412–432.Google Scholar
10. Peano, A. Hierarchies of conforming finite elements for plane elasticity and plate bending, Comps and Maths with Applications, 1976, 2, pp 211–224.Google Scholar
11. Szabo, B.A. Some recent developments in the finite element method,Comps and Maths with Applications, 1979, 5, pp 99–115.Google Scholar
12. Babuska, I., Szabo, B.A. and Katz, I.N. The p-version of the finite element method, SIAM J Num Anal, 1981,18, (3), pp 515–545.Google Scholar
13. Meirovitch, L. and Bahruh, H. On the Inclusion Principle for the hier archical finite element method, Int J Num methods in Eng, 1983, 19, pp 281–291.Google Scholar
14. Gui, W. and Babuska, I. The h, p, and h-p versions of the finite element method in 1 dimension. Part I. The error analysis of the p-version, Numerische Mathematik, 1986, 49, pp 577–612.Google Scholar
15. Zienkiewicz, O.C., Gago, F.E. De, S.R. and Kelly, D.W. The hierar chical concept in finite element analysis, Comps and Structures, 1983, 16, (1-4), pp 53–65.Google Scholar
16. Szabo, B.A. PROBE Theoretical Manual Release 1.0, 1985, NOETIC Technologies Corporation, St Louis.Google Scholar
17. Guo, B. and Babuska, I. The h-p version of the finite element method, Part 1: The basic approximation results, Comp Mech, 1986,1, pp 21–41.Google Scholar
18. Guo, B. and Babuska, I. The h-p version of the finite element method, Part 2: General results and applications, Comp Mech, 1986,1, pp 203–220.Google Scholar
19. Babuska, I. and Suri, M. The h-p version of the finite element method with quasiuniform meshes, Math Mod and Num Anal, 1987, 21, (2), pp 199–238.Google Scholar
20. Demkowicz, L., Oden, J.T., Rachowicz, W. and Hardy, O. Toward a Universal h-p adaptive finite element strategy, Part 1. Constrained approximation and data structure, Comp Methods in Applied Mech and Eng, 1989, 77, pp 79–112.Google Scholar
21. Oden, J.T., Demkowicz, L., Rachowicz, W. and Westerman, T.A. Toward a Universal h-p adaptive finite element strategy, Part 2. A posteriori error estimation, Comp Methods in Applied Mech and Eng, 1989, 77, pp 113–180.Google Scholar
22. Rachowicz, W., Oden, J.T. and Demkowicz, L. Toward a universal h-p adaptive finite element strtegy, Part 3. Design of h-p meshes, Comp Methods in Applied Mech and Eng, 1989, 77, pp 181–21.Google Scholar
23. Bardell, N.S. and Mead, D.J. Free vibration of an orthogonally stiffened cylindrical shell, Pan I: Line simple supports, J Sound and Vibration, 1989,134, pp 29–54.Google Scholar
24. Bardell, N.S. The application of symbolic computing to the hierarchical finite element method, lnt J Num Methods in Eng. 1989, 28, pp 1181–1204.Google Scholar
25. West, L.J., Bardell, N.S., Dunsdon, J.M. and Loasby, P.M. Some limitations associated with the use of K-orthogonal polynomials in hier-archical versions of the finite element method, Structural Dynamics: Recent Advances. Proceedings of the 6th International Conference, Vol 1, 1997, pp 217–231.Google Scholar
26. Beslin, O. and Nicolas, J. A hierarchical functions set for predicting very high order plate bending modes, J Sound and Vibration, 1997, 202, pp 633–655.Google Scholar
27. Bardell, N.S., Dunsdon, J.M. and Langley, R.S. Free vibration of coplanar sandwich panels, Comp Structures, 1997, 38, pp 463–475.Google Scholar
28. Houmat, A. An alternative hierarchical finite element formulation applied to plate vibrations, J Sound and Vibration, 1997, 206, pp 201–215.Google Scholar
29. Wang, T.M. and Kinsman, T.A. Vibrations of frame structures according to the Timoshenko theory, J Sound and Vibration, 1971, 14, pp 215–227.Google Scholar
30. Anagnostides, G. Frame response to harmonic excitation, taking into account the effects of shear deformation and rotary inertia, Comp and Structures, 1986, 24, pp 295–304.Google Scholar
31. Beskos, D.E. and Narayanan, G.V. Dynamic response of frameworks by numerical Laplace transform, Comp Methods in Applied Mech and Eng, 1983,37, pp 289–307.Google Scholar
32. Langley, R.S. Analysis of power flow in beams and frameworks using the direct-dynamic stiffness method, J Sound and Vibration, 1990. 136, pp 439–452.Google Scholar
33. Kulla, P. Dynamics of spinning bodies containing elastic rods,J Spacecraft, 1972, 9, pp 246–253.Google Scholar
34. Banerjee, J.R. and Williams, F.W. Coupled bending-torsional dynamic stiffness matrix of an axially loaded Timoshenko beam element, lnt J Solids and Structures| 1994, 31, pp 749–762.Google Scholar
35. Banerjee, J.R. and Williams, F.W. An exact dynamic stiffness matrix for coupled extensional-torsional vibrations of structural members, Comps and Structures, 1994,50, pp 161–166.Google Scholar
36. Crellin, E.B. and Janssens, F.L. VAMP-G: an application of the impedance method for spinning spacecraft with flexible appendages, ESA (European Space Agency) WPP-09: Modal Representation of Flexible Structures by Continuum Methods, 1989.Google Scholar
37. Wittrick, W.H. and Williams, F.W. A general algorithm for computing natural frequencies of elastic structures, Q J of Mech and Applied Maths, 1971, 24, pp 263–284.Google Scholar
38. Williams, F.W. Computation of natural frequencies and initial buckling stresses of prismatic plate assemblies, J Sound and Vibration, 1972, 21, pp 87–106.Google Scholar
39. Langley, R.S. A dynamic stiffness technique for the vibration analysis of stiffened shell structures, J Sound and Vibration, 1992, 156, pp 521–540.Google Scholar
40. Williams, F.W. and Banerjee, J.R. Accurately computed modal densi ties for panels and cylinders, including corrugations and cylinders. J Sound and Vibration, 1984,93, pp 481–488.Google Scholar
41. Langley, R.S. Application of the dynamic stiffness method to the free and forced vibrations of aircraft panels, J Sound and Vibration, 1989, 135, pp 319–331.Google Scholar
42. Langley, R.S. A dynamic stiffness/boundary element method for the prediction of interior noise levels, J Sound and Vibration, 1993,163, pp 207–230.Google Scholar
43. Kulla, P. Two-dimensional continuous elements. Proceedings of the First International Conference on the Dynamics of Flexible Structures in Space (Cranfield University). Southampton: Computational Mechanics Publications, 1990.Google Scholar
44. Mester, S.S. and Benaroya, H. Periodic and near-periodic structures. Shock and Vibration, 1995, 2, pp 69–95.Google Scholar
45. Mead, D.J. Wave propagation in continuous periodic structures: research contributions from Southampton, 1964-1995, J Sound and Vibration, 1996, 190. pp 495–524.Google Scholar
46. Brillouin, L. Wave Propagation in Periodic Structures, Dover, 1946.Google Scholar
47. Pease, M.C. Methods of Matrix Algebra, Academic Press, 1965.Google Scholar
48. Langley, R.S. On the forced response of one-dimensional periodic structures: vibration localization by damping, J Sound and Vibration, 1994, 178, pp 411–428.Google Scholar
49. Pierre, C. Weak and strong vibration localization in disordered struc tures: a statistical investigation, J Sound and Vibration, 1990, 139. pp 111–132.Google Scholar
50. Bendiksen, O.O. Mode localization phenomena in large space structures, A1AA J, 1987, 25, pp 1241–1248.Google Scholar
51. Langley, R.S. Wave transmission through one-dimensional near-periodic structures: optimum and random disorder, J Sound and Vibration, 1995, 188, pp 717–743.Google Scholar
52. Langley, R.S., Bardell, N.S. and Loasby, P.M. The optimal design of near-periodic structures to minimize vibration transmission and stress levels, J Sound and Vibration, 1997, 207, pp 627–646.Google Scholar
53. Mead, D.J. A general theory of harmonic wave propagation in linear periodic systems with multiple coupling, J Sound and Vibration, 1973, 27, pp 235–260.Google Scholar
54. Bardell, N.S. and Mead, D.J. Free vibration of an orthogonally stiff ened cylindrical shell, part II: discrete general stiffeners, J Sound and Vibration, 1989, 134, pp 55–72.Google Scholar
55. Mead, D.J., Zhu, D.C. and Bardell, N.S. Free vibration of an orthogo nally stiffened flat plate, J Sound and Vibration, 1988, 127, pp 19–48.Google Scholar
56. Langley, R.S. On the modal density and energy flow characteristics of periodic structures, J Sound and Vibration, 1994, 172, pp 491–511.Google Scholar
57. Mace, B.R. The vibration of plates on two-dimensionally periodic point supports, J Sound and Vibration, 1996,192, pp 629–643.Google Scholar
58. Langley, R.S., Bardell, N.S. and Ruivo, H.M. The response of two- dimensional periodic structures to harmonic point loading: a theoretical and experimental study of a beam grillage, J Sound and Vibration, 1997, 207, pp 521–535.Google Scholar
59. Mead, D.J. Plates with regular stiffening in acoustic media: vibration and radiation, J Acoustical Soc of America, 1990, 88, pp 391–401.Google Scholar
60. Lyon, R.H. Statistical Energy Analysis of Dynamical Systems: Theory and Applications, MIT Press, 1975.Google Scholar
61. Langley, R.S. A general derivation of the statistical energy analysis equations for coupled dynamic systems, J Sound and Vibration, 1989, 135, pp 499–508.Google Scholar
62. Woodhouse, J. An approach to the theoretical background to statistical energy analysis applied to structural vibration, J Acoustical Soc of America. 1981.69, pp 1695–1709.Google Scholar
63. Norton, M.P. Fundamentals of Noise and Vibration Analysis for Engi neers, Cambridge University Press, 1989.Google Scholar
64. Cremer, L., Heckl, M. and Ungar, E.E. Structure-borne Sound,Springer-Verlag; Second edition, 1987.Google Scholar
65. Langley, R.S. and Heron, K.H. Elastic wave transmission through plate-beam junctions, J Sound and Vibration, 1990, 143, pp 241–253.Google Scholar
66. Keane, A.J. and Price, W.G. Statistical energy analysis of strongly coupled systems, J Sound and Vibration, 1987, 117, pp 363–386.Google Scholar
67. Langley, R.S. and Khumbah, F.M. Prediction of high frequency vibration levels in built-up structures by using wave intensity analysis, 36th Structures, Structural Dynamics, and Materials Conference, AIAA, 1995.Google Scholar
68. Vibroacoustic Sciences Ltd, Userguide AutoSEA 1.0. VSL, 1992.Google Scholar
69. Manohar, C.S. and Keane, A.J. Statistics of energy flows in spring- coupled one-dimensional subsystems, Philosophical Transactions of the Royal Society, A346,525-542, 1994.Google Scholar
70. Lalor, N. Practical considerations for the measurement of internal loss factors and coupling loss factors of complex structures, Institute of Sound and Vibration Research (ISVR) Technical Report No 182, 1990.Google Scholar
71. Fahy, F.J. (Ed) Proceedings of the IUTAM Symposium on Statistical Energy Analysis, 8–11 July 1997, University of Southampton, Southampton, UK.Google Scholar
72. Langley, R.S. and Bercin, A.N. Wave intensity analysis of high frequency vibrations, Philosophical Transactions of the Royal Society, 1994, A346, pp 489–499.Google Scholar