Hostname: page-component-848d4c4894-4rdrl Total loading time: 0 Render date: 2024-06-23T04:12:42.293Z Has data issue: false hasContentIssue false
  • English
  • Français

On the generation of a set of accurate numerical modal functions for use in the aeroelastic analysis of flexible rotor blades

Published online by Cambridge University Press:  04 July 2016

A. Simpson
A. Simpson*
Affiliation:
Department of Aerospace Engineering, University of Bristol
Get access Rights & Permissions [Opens in a new window]

Extract

A comparison is presented of three methods for the generation of numerical, modal approximating functions for use in modal Lagrangian analysis of rotating flexible blades. The methods considered are those based on the use of uniform beam/bar eigenfunctions, smooth bending moment or torque modes, and modes generated by recourse to one stage of the Stodola method. For blades which are highly non-uniform in their specific stiffness and inertial properties, and where the objective is to use a small number of approximating functions, consistent with accurate determination of eigen-solutions in the fundamental spectrum, it is demonstrated (as is well known) that direct use of uniform system eigenfunctions is unsatisfactory. On the other hand, it is demonstrated that the use of smooth bending moment modes, even in cases where the variations in sectional inertia properties are very large, can produce excellent results. The use of ‘Stodola modes', however, is shown to offer the all-important advantage of enhanced convergence rate in all cases considered.

Type
Research Article
Information
The Aeronautical Journal , Volume 93 , Issue 926 , July 1989 , pp. 207 - 218
Copyright
Copyright © Royal Aeronautical Society 1989 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Simpson, A. Derivation of Modal Lagrangian Equations of Motion for a Multiblade Flexible Rotor on a Flexible Shaft. Department of Aerospace Engineering, University of Bristol. Report AS3/88. 1988. (To be prepared as an RAE-TR).Google Scholar
2. Collar, A. R. and Simpson, A. Matrices and engineering dynamics. Ellis Horwood Ltd. 1987.Google Scholar
3. Done, G. T. S. and Patel, M. H. The use of smooth bending moment modes in helicopter rotor blade vibration studies. J Sound Vibr, 1988, 123 (1), 71–80.Google Scholar
4. Niblett, LL.T. The normal modes of beams by a Lanczos-Stodola method. J Sound Vibr, 1983, 91, 247–253.Google Scholar
5. Bishop, R. E. D. and Johnson, D. C. The mechanics of vibration. Cambridge University Press, 1960.Google Scholar
6. Den Hartog, J. P. Mechanical vibrations, 3rd ed, McGraw-Hill, 1947,Google Scholar
7. Simpson, A. A Newtonian procedure for the solution of Ex = λAx. J Sound Vibr, 1982, 82 (2), 161–170.Google Scholar
8. Simpson, A. Microcomputer matrix codes for engineering dynamics systems.(Book to be published, with disks).Google Scholar