Hostname: page-component-848d4c4894-v5vhk Total loading time: 0 Render date: 2024-06-27T04:47:20.614Z Has data issue: false hasContentIssue false
  • English
  • Français

Aeroelasticity of two-dimensional lifting surfaces via indicial function approach

Published online by Cambridge University Press:  04 July 2016

P. Marzocca ,
L. Librescu  and
G. Chiocchia
P. Marzocca
Affiliation:
Engineering Science and Mechanics Department, Virginia Polytechnic Institute and State University, Blacksburg, USA
L. Librescu
Affiliation:
Engineering Science and Mechanics Department, Virginia Polytechnic Institute and State University, Blacksburg, USA
G. Chiocchia
Affiliation:
Dipartimento di Ingegneria, Aeronauticae SpazialePolitecnico di Torino, Italy
Get access Rights & Permissions [Opens in a new window]

Extract

An aeroelastic formulation of 2D lifting surfaces in an incompressible flow field via the use of aerodynamic indicial functions is presented. The approach carried out in time and frequency domains yields the proper aerodynamic loads necessary to the study of the subcritical aeroelastic response and flutter of lifting surfaces, respectively. The expressions of the unsteady lift and aerodynamic twist moment in the frequency domain are given in terms of the Theodorsen’s function, while in the time domain, these are obtained directly with the help of the Wagner’s function. Closed form expressions of unsteady aerodynamic derivatives, helpful in an unified approach of response and flutter analyses, and results related to aeroelastic response to gust and blast loads are supplied. In this context, a novel representation of the aeroelastic response in the phase - space was supplied and pertinent conclusions on the implications of some basic parameters have been outlined.

Type
Research Article
Information
The Aeronautical Journal , Volume 106 , Issue 1057 , March 2002 , pp. 147 - 153
Copyright
Copyright © Royal Aeronautical Society 2002 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Bisplinghoff, R.L., Ashley, H. and Halfman, R.L. Aeroelasticity, Dover Publications, New York, 1996.Google Scholar
2. Marzocca, P., Librescu, L. and Chiocchia, G. Aeroelastic response of a 2D lifting surfaces to gust and arbitrary explosive loading signatures, Int J Impact Eng, 2001, 25, (1),pp 41–65.Google Scholar
3. Librescu, L. and Nosier, A. Response of laminated composite flat panels to sonic-boom and explosive blast loading, AIAA J, 1990, 28, (2), pp 345–352.Google Scholar
4. Karpel, L. Design for active flutter suppression and gust alleviation using state-space aeroelastic modelling, J Aircr, 1982, 19, (3), pp 221–227.Google Scholar
5. Edwards, J.W., Ashley, H. and Breakwell, J.V. Unsteady aerodynamic modelling for arbitrary motions, AIAA J, 1979, 17, (4), pp 365–374, presented as AIAA–77–451 at the AIAA Dynamics Specialist Conference, San Diego, California, 1977.Google Scholar
6. Fung, Y.C. An introduction to the Theory of Aeroelasticity, John Wiley, New York, 1955.Google Scholar
7. Mazelsky, B. Charts of airplane acceleration ratio for gusts of arbitrary shape. NACA TN 2036, February 1950, p 18.Google Scholar
8. Houbolt, J.C. and Kordes, E.E. Structural response to discrete and continuous gusts of an airplane having wing bending flexibility and a correlation of calculated and flight results, NACA Rpt 1181, 1954, p 22, Supersedes NACA TN 3006.Google Scholar
9. Sears, W.R. and Sparks, B.O. On the reaction of an elastic wing to vertical gusts, J Aeronaut Sci, 1941, 9, pp 64–67.Google Scholar
10. Leishman, J.G. Validation of approximate indicial aerodynamic functions for two-dimensional subsonic flow, J Aircr, 1988, 25, (10), pp 914–922.Google Scholar