Hostname: page-component-848d4c4894-tn8tq Total loading time: 0 Render date: 2024-06-27T19:00:15.900Z Has data issue: false hasContentIssue false

Aeroelastic stability and control of an oblique wing

Published online by Cambridge University Press:  04 July 2016

R. T. Jones
Affiliation:
Ames Research Center, NASA Moffett Field, California
J. W. Nisbet
Affiliation:
Boeing Commercial Airplane Company, Seattle, Washington

Extract

Aerodynamic properties of oblique wings have been studied intensively at NASA Ames Research Center and also by the Boeing Commercial Airplane Co. Figure 1 shows the design proposed by Boeing for a 200 passenger transport intended to fly in the transonic speed range; the design employs an oblique wing of high aspect ratio.

One feature of the oblique wing design that has not been fully documented is its aeroelastic stability. Since the oblique wing has one panel swept forward and the other swept back, it is perhaps natural to try to relate its behaviour to well known phenomena associated with conventional swept-forward or swept-back wings. This approach would lead one to expect aeroelastic divergence of the forward wing panel.

Type
Technical note
Copyright
Copyright © Royal Aeronautical Society 1976 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Jones, R. T. Reduction of wave drag by antisymmetric arrangements of wings and bodies. AIAA Journal, Vol 10, No 2, pp 171176, February 1972.Google Scholar
2. Graham, L. A., Jones, R. T. and Boltz, F. W. An experimental investigation of three oblique wing body combinations at Mach numbers between 0·60 and 1·40. NASA TM X-62,256, April 1973.Google Scholar
3. Jones, R. T. and Nisbet, J. W. Transonic transport wings—oblique or swept? Astronautics and Aeronautics, January 1974.Google Scholar