Book contents
- Frontmatter
- Contents
- Preface to the Second Edition
- Preface to the First Edition
- Structural Impact
- 1 Static Plastic Behaviour of Beams
- 2 Static Plastic Behaviour of Plates and Shells
- 3 Dynamic Plastic Behaviour of Beams
- 4 Dynamic Plastic Behaviour of Plates
- 5 Dynamic Plastic Behaviour of Shells
- 6 Influence of Transverse Shear and Rotatory Inertia
- 7 Influence of Finite Displacements
- 8 Strain-Rate-Sensitive Behaviour of Materials
- 9 Dynamic Progressive Buckling
- 10 Dynamic Plastic Buckling
- 11 Scaling Laws
- Appendix 1 Principle of Virtual Work
- Appendix 2 Path-Dependence of an Inelastic Material
- Appendix 3 Principle of Virtual Velocities
- Appendix 4 Consistent Sets of Equilibrium Equations and Geometrical Relations
- Appendix 5 Buckingham Π-Theorem
- Appendix 6 Quasi-Static Behaviour
- Appendix 7 Martin’s Upper Bound Displacement Theorem
- References
- Answers to Selected Problems
- Author Index
- Subject Index
- References
References
Published online by Cambridge University Press: 05 June 2012
Book contents
- Frontmatter
- Contents
- Preface to the Second Edition
- Preface to the First Edition
- Structural Impact
- 1 Static Plastic Behaviour of Beams
- 2 Static Plastic Behaviour of Plates and Shells
- 3 Dynamic Plastic Behaviour of Beams
- 4 Dynamic Plastic Behaviour of Plates
- 5 Dynamic Plastic Behaviour of Shells
- 6 Influence of Transverse Shear and Rotatory Inertia
- 7 Influence of Finite Displacements
- 8 Strain-Rate-Sensitive Behaviour of Materials
- 9 Dynamic Progressive Buckling
- 10 Dynamic Plastic Buckling
- 11 Scaling Laws
- Appendix 1 Principle of Virtual Work
- Appendix 2 Path-Dependence of an Inelastic Material
- Appendix 3 Principle of Virtual Velocities
- Appendix 4 Consistent Sets of Equilibrium Equations and Geometrical Relations
- Appendix 5 Buckingham Π-Theorem
- Appendix 6 Quasi-Static Behaviour
- Appendix 7 Martin’s Upper Bound Displacement Theorem
- References
- Answers to Selected Problems
- Author Index
- Subject Index
- References
Summary
A summary is not available for this content so a preview has been provided. Please use the Get access link above for information on how to access this content.
- Type
- Chapter
- Information
- Structural Impact , pp. 541 - 570Publisher: Cambridge University PressPrint publication year: 2011
References
The Steel Skeleton, vol. 2: Plastic Behaviour and DesignCambridge University PressCambridge 1956
Plastic Analysis of StructuresMcGraw-HillNew York 1959
An Introduction to PlasticityAddison-Wesley, Boston, Mass. 1959
Plasticity: Theory and ApplicationMacmillan, New York 1968
Plastic Design of Frames 1: FundamentalsCambridge University PressCambridge 1969
Plastic Design of Frames 2: ApplicationsCambridge University PressCambridge 1971
Plastic Theory of StructuresMIT PressCambridge, Mass 1971
Engineering PlasticityVan Nostrand ReinholdLondon 1973
Fundamentals of the Theory of PlasticityMIRMoscow 1974
Plasticity: Fundamentals and General ResultsMIT PressCambridge, Mass 1975
Plasticity for EngineersEllis HorwoodChichester, and John Wiley, New York 1985
Structural Mechanics with Introductions to Elasticity and PlasticityMcGraw-HillNew York 1970
An Introduction to PlasticityAddison-WesleyBoston, Mass 1959
Limit Analysis of Rotationally Symmetric Plates and ShellsPrentice-HallEnglewood Cliffs, N.J 1963
A more fundamental approach to plastic stress-strain relationsProceedings First U.S. Congress of Applied Mechanics, ASME 1951 26 101Google Scholar
Extended limit design theorems for continuous mediaQuarterly of Applied Mathematics 9 381 1952Google Scholar
Plasticity for EngineersEllis Horwood, Chichester, and John WileyNew York 1985
The load carrying capacities of circular platesJournal of the Mechanics and Physics of Solids 2 1953Google Scholar
Theory of Plates and ShellsMcGraw-HillNew York 1959
Plastic and Elastic Design of Slabs and PlatesThames & HudsonLondon 1961
Plastic behavior of simply supported reinforced concrete plates at moderately large deflectionsInternational Journal of Solids and Structures 1 97 1965Google Scholar
The general theory of limit designProceedings of the Eighth International Congress on Theoretical and Applied Mechanics 2 65 1952Google Scholar
A Lower Bound to the Static Collapse Pressure of a Fully Clamped Rectangular PlateMIT, CambridgeMass 1971
Limit analysis for plates: the exact solution for a clamped square plate of isotropic homogeneous material obeying the square yield criterion and loaded by uniform pressurePhilosophical Transactions of the Royal Society of London, Series A (Mathematical and Physical Sciences) 277 121 1974Google Scholar
On the carrying capacity of plates of arbitrary shape and variable fixity under a concentrated loadJournal of Applied Mechanics 25 598 1958Google Scholar
Thin Elastic ShellsJohn WileyNew York 1967
Plastic Analysis of StructuresMcGraw-HillNew York 1959
Theory of Shell StructuresCambridge University PressCambridge 1983
The load-carrying capacity of circular plates at large deflectionJournal of Applied Mechanics 23 49 1956Google Scholar
Rigid plastic behaviour of platesBulletin of Mechanical Engineering Education 9 235 1970Google Scholar
An experimental investigation of the behaviour of clamped, rectangular, mild steel plates subjected to uniform transverse pressureProceedings of the Institution of Civil Engineers 42 75 1969Google Scholar
Experiments on the plastic behavior of short steel cylindrical shells subject to internal pressureProceedings of the First International Conference on Pressure Vessel Technology 1 45 1969Google Scholar
An experimental verification of limit analysis of short cylindrical shellsJournal of Applied Mechanics 36 362 1969Google Scholar
Limit analysis of cylindrical shells under axially-symmetric loadingProceedings of the First Midwestern Conference on Solid Mechanics158 1953Google Scholar
An experimental study of cylindrical shells under ring loadingProgress in Applied Mechanics, Prager Anniversary VolumeMacmillanNew York205 1963
The influence of free ends on the load-carrying capacities of cylindrical shellsJournal of the Mechanics and Physics of Solids 4 17 1955Google Scholar
The load carrying capacities of cylindrical shells subjected to a ring of forceJournal of the Mechanics and Physics of Solids 7 169 1959Google Scholar
Design of circular plates based on plastic limit loadProceedings of the ASCE 86 91 1960Google Scholar
Studies in collapse analysis of rigid-plastic plates with a square yield diagramProceedings of the Royal Society of London, Series A (Mathematical and Physical Sciences) 241 311 1957Google Scholar
Combined distributed loads on rigid-plastic circular plates with large deflectionsInternational Journal of Solids and Structures 5 51 1969Google Scholar
Inelastic Behaviour in ShellsNoordhoffGroningen 1967
Plastic analysis of cylindrical shells subjected to large deflectionsArchiwum Mechaniki Stosowanej 18 599 1966Google Scholar
Load-deflexion relations for rigid-plastic cylindrical shells beyond the incipient collapse loadInternational Journal of Mechanical Sciences 12 839 1970Google Scholar
The load carrying capacities of symmetrically loaded shallow shellsInternational Journal of Solids and Structures 8 1339 1972Google Scholar
Limit analysis of shells of revolution, pts 1 and 2Proceedings of the Royal Netherlands Academy of Science 57 534 1954Google Scholar
Limit analysis of symmetrically loaded thin shells of revolutionJournal of Applied Mechanics 26 61 1959Google Scholar
Design of thin-walled torispherical and toriconical pressure-vessel headsJournal of Applied Mechanics 28 292 1961Google Scholar
Collapse and bursting pressures of mild-steel vesselsArchiwum Budowy Maszyn 18 77 1971Google Scholar
The limit pressure for a flush cylindrical nozzle in a spherical pressure vesselInternational Journal of Mechanical Sciences 6 105 1964Google Scholar
Approximate analysis of the plastic limit pressures of nozzles in cylindrical shellsTransactions of the ASME, Journal of Engineering for Power 90 171 1968Google Scholar
The collapse pressure of a flush cylindrical nozzle intersecting a conical pressure vessel axisymmetricallyInternational Journal of Mechanical Sciences 11 401 1969Google Scholar
The Stress Analysis of Pressure Vessels and Pressure Vessel ComponentsPergamonOxford 1970
A comparison of experiments and theory in the plastic bending of circular platesJournal of the Mechanics and Physics of Solids 10 301 1962Google Scholar
Experimental investigation of clamped beams struck transversely by a massInternational Journal of Impact Engineering 6 303 1987Google Scholar
Impact behaviour of small scale model motor coachesProceedings of the Institution of Mechanical Engineers 186 409 1972Google Scholar
Large plastic deformations of beams under transverse impactJournal of Applied Mechanics 19 308 1952Google Scholar
Survey of Progress in Plastic Wave Propagation in Solid BodiesBrown University Report 1967
Large plastic deformations of beams under blast type loadingProceedings of the Second US National Congress of Applied Mechanics505 1954Google Scholar
Standard Mathematical TablesCRC PressCleveland, Ohio 1974
The permanent deformation of an encastré beam struck transversely at any point in its spanProceedings of the Institution of Civil Engineers 10 277 1958Google Scholar
The permanent deformation of a cantilever struck transversely at its tipProceedings of the Royal Society of London, Series A (Mathematical and Physical Sciences) 228 462 1955Google Scholar
Rigid-plastic beams under uniformly distributed impulsesJournal of Applied Mechanics 32 481 1965Google Scholar
Parkes revisited: on rigid-plastic and elastic plastic dynamic structural analysisInternational Journal of Impact Engineering 2 1 1984Google Scholar
The behaviour of long beams under impact loadingJournal of Applied Mechanics 17 27 1950Google Scholar
Plastic deformation of semi-infinite beams subject to transverse impact loading at the free endJournal of Applied Mechanics 23 239 1956Google Scholar
Survey of Methods of Analysis for Plastic Deformation of Structures under Dynamic LoadingBrown University Report 1967
On the Relation between Rigid-Plastic and Elastic-Plastic Predictions of Response to Pulse LoadingInternational Journal of Impact Engineering 7 139 1988Google Scholar
Experimental and theoretical investigation of the plastic deformation of cantilever beams subjected to impulsive loadingJournal of Applied Mechanics 29 719 1962Google Scholar
ImpactEdward ArnoldLondon 1960
Impact Strength of MaterialsEdward ArnoldLondon, and Crane Russak, New York 1972
Impact and bending of a rigid-plastic fan bladeJournal of Applied Mechanics 51 501 1984Google Scholar
The plastic hinge position in a circular cantilever when struck normal to its plane by a constant jet at its tipInternational Journal of Impact Engineering 3 143 1985Google Scholar
The plastic hinge position in a bent cantilever struck normal to its plane by a steady jet applied at its tipInternational Journal of Impact Engineering 3 233 1985Google Scholar
A reconsideration and some new results for the circular beam impact problemInternational Journal of Impact Engineering 4 221 1986Google Scholar
On the elastic–plastic deformation of cantilever beams subjected to tip impactInternational Journal of Impact Engineering 6 109 1987Google Scholar
Dynamic plastic failure of a free–free beamInternational Journal of Impact Engineering 6 225 1987Google Scholar
Numerical simulation of a clamped beam under impact loadingComputers and Structures 32 281 1989Google Scholar
Recent studies on the dynamic plastic behaviour of structuresApplied Mechanics Reviews 42 95 1989Google Scholar
Predictions of permanent deformation of impulsively loaded simply supported square tube steel beamsInternational Journal of Mechanical Sciences 27 55 1985Google Scholar
Dynamic behaviour of a rigid perfectly plastic free-free beam subjected to step-loading at any cross-section along its spanInternational Journal of Impact Engineering 21 165 1998Google Scholar
Experimental and theoretical study of free-free beam subjected to impact at any cross-section along its spanInternational Journal of Impact Engineering 28 761 2003Google Scholar
Post-severance analysis of impulsively loaded beamsInternational Journal of Solids and Structures 41 6441 2004Google Scholar
Post-failure response of impulsively loaded clamped beamsEuropean Journal of Mechanics, A/Solids 25 707 2006Google Scholar
The dynamic plastic behaviour of fully clamped rectangular platesInternational Journal of Solids and Structures 6 1499 1970Google Scholar
On the dynamics of plastic circular platesJournal of Applied Mathematics and Physics ZAMP 5 317 1954Google Scholar
The permanent deflection of a plastic plate under blast loadingJournal of Applied Mechanics 22 375 1955Google Scholar
Clamped circular rigid-plastic plates under blast loadingJournal of Applied Mechanics 33 256 1966Google Scholar
On the plastic deformation of built-in circular plates under impulsive loadJournal of the Mechanics and Physics of Solids 3 22 1954Google Scholar
Theory of Plates and ShellsMcGraw-HillNew York 1959
Dynamic plastic deformations of simply supported square platesJournal of the Mechanics and Physics of Solids 7 229 1959Google Scholar
Impulsive loading of a simply supported circular rigid-plastic plateJournal of Applied Mechanics 35 59 1968Google Scholar
Impact Strength of MaterialsEdward ArnoldLondon, and Crane Russak, New York 1972
On a rigid-plastic annular plate under impulsive loadJournal of Applied Mathematics and Mechanics Prik Mat iMek 23 234 1959Google Scholar
Impulsively loaded strain-rate-sensitive platesJournal of Applied Mechanics 34 380 1967Google Scholar
Finite-deflections of a rigid-viscoplastic strain-hardening annular plate loaded impulsivelyJournal of Applied Mechanics 35 349 1968Google Scholar
Finite-deflections of a simply supported rigid-plastic annular plate loaded dynamicallyInternational Journal of Solids and Structures 4 593 1968Google Scholar
Plastic bending of an annular plate by uniform impulseInternational Journal of Non-Linear Mechanics 6 69 1971Google Scholar
Clamped circular rigid-plastic plates under central blast loadingInternational Journal of Solids and Structures 2 319 1966Google Scholar
Rigid-plastic analysis of a simply supported circular plate due to dynamic circular loadingJournal of the Franklin Institute 288 121 1969Google Scholar
Response of circular plates to central pulse loadingInternational Journal of Solids and Structures 13 1091 1977Google Scholar
Dynamic load carrying capacity of a circular plateArchiwum Mechaniki Stosowanej 10 635 1958Google Scholar
Large plastic deformations of beams under blast type loadingProceedings of the Second US National Congress of Applied Mechanics, ASME505 1954Google Scholar
Correlation parameters for eliminating the effect of pulse shape on dynamic plastic deformationJournal of Applied Mechanics 37 744 1970Google Scholar
Dynamic analysis of clamped plastic circular platesInternational Journal of Mechanical Sciences 14 225 1972Google Scholar
Clamped circular rigid-plastic plates subjected to central blast loadingComputers and Structures 2 487 1972Google Scholar
Efficient pulse shapes to plastically deform beamsJournal of Applied Mechanics 41 604 1974Google Scholar
Foundation of correlation parameters for eliminating pulse shape effects on dynamic plastic response of structuresTrans. ASME, Journal of Applied Mechanics 72 172 2005Google Scholar
On the plastic theory of platesProceedings of the Royal Society of London, Series A (Mathematical and Physical Sciences) 241 153 1957Google Scholar
Limit Analysis of Rotationally Symmetric Plates and ShellsPrentice-HallEnglewood Cliffs, N.J. 1963
Impact pressure loading of rigid-plastic cylindrical shellsJournal of the Mechanics and Physics of Solids 3 176 1955Google Scholar
The elastic–plastic response of thin spherical shells to internal blast loadingJournal of Applied Mechanics 27 139 1960Google Scholar
Significance of strain-hardening and strain-rate effects on the transient response of elastic–plastic spherical shellsInternational Journal of Mechanical Sciences 12 811 1970Google Scholar
Stresses in ShellsSpringerNew York 1973
The dynamic plastic behaviour of simply supported spherical shellsInternational Journal of Solids and Structures 9 741 1973Google Scholar
Consistent equations for the large deflections of structuresBulletin of Mechanical Engineering Education 10 9 1971Google Scholar
Limit analysis of shells of revolutionProceedings of the Royal Netherlands Academy of Science B57 534542 1954Google Scholar
The load carrying capacities of symmetrically loaded shallow shellsInternational Journal of Solids and Structures 8 1339 1972Google Scholar
Approximate yield conditions in dynamic plasticityProceedings of the Third Midwestern Conference on Solid MechanicsUniversity of Michigan29 1957
On the impact pressure loading of a plastic spherical capJournal of Applied Mechanics 33 704 1966Google Scholar
An approximate theoretical study of the dynamic plastic behavior of shellsInternational Journal of Non-Linear Mechanics 7 255 1972Google Scholar
A comparison of theory and experiments on the dynamic plastic behaviour of shellsArchives of Mechanics 24 701 1972Google Scholar
An experimental study into the dynamic inelastic behaviour of spherical shells and shell intersectionsArchiwum Budowy Maszyn 20 33 1973Google Scholar
The influence of blast characteristics on the final deformation of circular cylindrical shellsJournal of Applied Mechanics 23 617 1956Google Scholar
Ultimate dynamic load of a circular cylindrical shellProceedings of the Second Midwestern Conference on Solid MechanicsLafayette, Ind150 1956
The effect of end conditions on the dynamic loading of plastic shellsJournal of the Mechanics and Physics of Solids 7 258 1959Google Scholar
Dynamic loading of rigid-plastic cylindrical shellsJournal of the Mechanics and Physics of Solids 4 53 1956Google Scholar
On dynamic behaviour of plastic structuresProceedings of the Eleventh International Congress of Applied MechanicsMunich 1964 SpringerNew York629
Dynamic behaviour of cylindrical shells strengthened with ring ribs – Pt I: Infinitely long shellInternational Journal of Solids and Structures 5 817 1969Google Scholar
Correlation parameters for eliminating the effect of pulse shape on dynamic plastic deformationJournal of Applied Mechanics 37 744 1970Google Scholar
Dynamic plastic deformation of circular cylindrical shellsJournal of Applied Mechanics 39 746 1972Google Scholar
Dynamic plastic deformation of an infinite plateInternational Journal of Solids and Structures 22 859 1986Google Scholar
Effect of pulse shape and distribution on the plastic deformation of a circular plateInternational Journal of Solids and Structures 23 1179 1987Google Scholar
Estimation of the plastic structural response under impactInternational Journal of Impact Engineering 4 271 1986Google Scholar
The effects of strain-hardening and strain-rate sensitivity on the transient response of elastic-plastic rings and cylindersInternational Journal of Mechanical Sciences 11 825 1969Google Scholar
Impulsively loaded strain hardened rate-sensitive rings and tubesInternational Journal of Solids and Structures 6 1119 1970Google Scholar
An approximate rigid-plastic analysis of shell intersections loaded dynamicallyTransactions of the ASME, Journal of Engineering for Industry 95 321 1973Google Scholar
Some experiments on the dynamic plastic behaviour of shell intersectionsNuclear Engineering and Design 26 274 1974Google Scholar
A literature review of the dynamic plastic response of structuresThe Shock and Vibration Digest 7 89 1975Google Scholar
Plastic Theory of StructuresMIT PressCambridge, Mass 1971
Experimental investigation of clamped beams struck transversely by a massInternational Journal of Impact Engineering 6 303 1987Google Scholar
A study of the higher modal dynamic plastic response of beamsInternational Journal of Mechanical Sciences 18 533 1976Google Scholar
Higher modal dynamic plastic behaviour of beams loaded impulsivelyInternational Journal of Mechanical Sciences 20 135 1978Google Scholar
Dynamics of ideal fibre-reinforced rigid-plastic beamsJournal of the Mechanics and Physics of Solids 22 147 1974Google Scholar
Dynamic behaviour of ideal fibre-reinforced rigid-plastic beamsJournal of Applied Mechanics 43 319 1976Google Scholar
Shear and bending response of a rigid-plastic beam to blast-type loadingIngenieur-Archiv 46 35 1977Google Scholar
Plastic shear deformations in dynamic load problemsEngineering PlasticityCambridge University PressCambridge647 1968
Shear and bending response of a rigid-plastic beam to partly distributed blast-type loadingJournal of Structural Mechanics 14 275 1986Google Scholar
The influence of rotatory inertia and transverse shear on the dynamic plastic behaviour of beamsJournal of Applied Mechanics 46 303 1979Google Scholar
A numerical procedure for the dynamic plastic response of beams with rotatory inertia and transverse shear effectsJournal of Structural Mechanics 7 193 1979Google Scholar
Beams under lateral projectile impactProceedings of the ASCE, Journal of the Engineering Mechanics Division 108 51 1982Google Scholar
A note on the interaction of shear and bending in plastic platesArchiwum Mechaniki Stosowanej 15 411 1963Google Scholar
Dynamic plastic response of circular plates with transverse shear and rotatory inertiaJournal of Applied Mechanics 47 27 1980Google Scholar
The permanent deflection of a plastic plate under blast loadingJournal of Applied Mechanics 22 375 1955Google Scholar
Dynamic plastic response of circular plates with transverse shearJournal of Applied Mechanics 53 952 1986Google Scholar
Impulsive loading of a cylindrical shell with transverse shear and rotatory inertiaInternational Journal of Solids and Structures 19 263 1983Google Scholar
The influence of large deflections on the behaviour of rigid-plastic cylindrical shells loaded impulsivelyJournal of Applied Mechanics 37 416 1970Google Scholar
Impulsive loading theorems for rigid-plastic continuaProceedings of the ASCE, Journal of the Engineering Mechanics Division 90 27 1964Google Scholar
Lower bounds on deformations of dynamically loaded rigid-plastic continuaAIAA Journal 8 2043 1970Google Scholar
Bounds on the dynamic plastic behaviour of structures including transverse shear effectsInternational Journal of Impact Engineering 3 273 1985Google Scholar
The full plastic moment of an I-beam in the presence of shear forceJournal of the Mechanics and Physics of Solids 18 359 1970Google Scholar
Some remarks on the influence of transverse shear on the plastic yielding of structuresInternational Journal of Mechanical Sciences 20 759 1978Google Scholar
Interaction curves for shear and bending of plastic beamsJournal of Applied Mechanics 24 453 1957Google Scholar
Plastic yielding of I-beams under shear, and shear and axial loadingInternational Journal of Mechanical Sciences 18 375 1976Google Scholar
Effect of shear force on the fully plastic moment of an I-beamJournal of Mechanical Engineering Science 3 258 1961Google Scholar
PlasticitéEyrollesParis 1956
On yield surfaces for ideally plastic shellsProblems of Continuum MechanicsSIAMPhiladelphia414 1961
The effect of transverse shear stresses on the yield surface for thin shellsInternational Journal of Solids and Structures 9 819 1973Google Scholar
The effect of shear on the plastic bending of beamsJournal of Applied Mechanics 23 509 1956Google Scholar
Der Ebene Spannungszustand bei der plastischen BalkenbeigungAus theorie und Praxis der IngenieurwissenschaftenW. Ernst und SohnBerlin39 1971
Impulsive loading of an ideal fibre-reinforced rigid- plastic beamJournal of Structural Mechanics 5 369 1977Google Scholar
The dynamic mechanical response of fibre-reinforced beams to large transverse loadsJournal of the Mechanics and Physics of Solids 33 193 1985Google Scholar
Plastic failure of ductile beams loaded dynamicallyTransactions of the ASME, Journal of Engineering for Industry 98 131 1976Google Scholar
The impact behaviour of aluminium alloy and mild steel double-shear specimensInternational Journal of Mechanical Sciences 30 153 1988Google Scholar
On the dynamic inelastic failure of beamsStructural FailureJohn WileyNew York133 1989
Further experimental investigations on the failure of clamped beams under impact loadsInternational Journal of Solids and Structures 27 1113 1991Google Scholar
Numerical simulation of impact loaded steel beams and the failure criteriaInternational Journal of Solids and Structures 34 3977 1997Google Scholar
A failure criterion for beams under impulsive loadingInternational Journal of Impact Engineering 12 101 1992Google Scholar
A further study of plastic shear failure of impulsively loaded clamped beamsInternational Journal of Impact Engineering 24 6613 2000Google Scholar
Response and failure of a double-shear beam subjected to mass impactInternational Journal of Solids and Structures 39 1919 2002Google Scholar
The deformation and tearing of thin circular plates subjected to impulsive loadsInternational Journal of Impact Engineering 11 77 1991Google Scholar
Dynamic response and failure of fully clamped circular plates under impulsive loadingInternational Journal of Impact Engineering 13 259 1993Google Scholar
Deformation and rupture of blast loaded square plates-predictions and experimentsInternational Journal of Impact Engineering 13 279 1993Google Scholar
Tearing of blast loaded plates with clamped boundary conditionsInternational Journal of Impact Engineering 18 803 1996Google Scholar
The deformation and tearing of thin square plates subjected to impulsive loads-an experimental studyInternational Journal of Impact Engineering 18 99 1996Google Scholar
Experimental and numerical studies on the response of quadrangular stiffened plates. Part 1: subjected to uniform blast loadInternational Journal of Impact Engineering 31 55 2005Google Scholar
Experimental and numerical studies on the response of quadrangular stiffened plates. Part 2: localised blast loadingInternational Journal of Impact Engineering 31 85 2005Google Scholar
Blast loading of fully clamped beams with transverse shear effectsMechanics, Structures and Machines 23 59 1995Google Scholar
Blast loading of fully clamped circular plates with transverse shear effectsInternational Journal of Solids and Structures 31 1861 1994Google Scholar
Blast loading of a ‘short’ cylindrical shell with transverse shear effectsInternational Journal of Impact Engineering 16 331 1995Google Scholar
Post-severance analysis of impulsively loaded beamsInternational Journal of Solids and Structures 41 6441 2004Google Scholar
Post-failure response of impulsively loaded clamped beamsEuropean Journal of Mechanics, A/Solids 25 707 2006Google Scholar
Post-failure behaviour of impulsively loaded circular platesInternational Journal of Mechanical Sciences 52( 706 2010Google Scholar
Collected works on Benjamin Robins and Charles HuttonPhoenix Publishing House PVT LtdNew Delhi 2001
Stabbing of metal sheets by a triangular knife. An archaeological investigationInternational Journal of Impact Engineering 27 459 2002Google Scholar
The mechanics of penetration of projectiles into targetsInternational Journal of Engineering Science 16 1 1978Google Scholar
Non-ideal projectile impact on targetsInternational Journal of Impact Engineering 22 95 1999Google Scholar
Impact loading of plates and shells by free-flying projectiles: a reviewInternational Journal of Impact Engineering 18 141 1996Google Scholar
proceedings of Hypervelocity Impact SymposiumInternational Journal of Impact Engineering 26 1 2001Google Scholar
Impact Strength of MaterialsEdward ArnoldLondon and Crane Russak, New York 1972
Low velocity perforation of mild steel circular plates with projectiles having different shaped impact facesASME, Journal of Pressure Vessel Technology 130 2008Google Scholar
Low velocity perforation of mild steel rectangular plates with projectiles having different shaped impact facesASME, Journal of Pressure Vessel Technology 130 2008Google Scholar
Critical impact energy for the perforation of metallic platesNuclear Engineering and Design 238 2521 2008Google Scholar
On deformation and perforation of ship structures under ballistic impactsShips and Offshore Structures (SAOS) 2 217 2007Google Scholar
Effect of target thickness in blunt projectile penetration of Weldox 460E steel platesInternational Journal of Impact Engineering 28 413 2003Google Scholar
Semi-empirical equations for the perforation of plates struck by a massStructures under Shock and ImpactComputational Mechanics PublicationsSouthampton and Thomas Telford, London369 1992
Experimental investigation into the dynamic plastic response and perforation of a clamped circular plate struck transversely by a massProceedings, Institution of Mechanical Engineers, Journal of Mechanical Engineering Science 208 113 1994Google Scholar
Impact loading of plates – an experimental investigationInternational Journal of Impact Engineering 1 3 1983Google Scholar
Dropped objects’ plugging capacity of steel plates: an experimental investigationInternational Journal of Impact Engineering 9 289 1990Google Scholar
Correlation parameters for eliminating the effect of pulse shape on dynamic plastic deformationJournal of Applied Mechanics 37 744 1970Google Scholar
Shear and adiabatic shear failures in an impulsively loaded fully clamped beamInternational Journal of Impact Engineering 22 589 1999Google Scholar
Adiabatic Shear Localisation; Occurrence, Theories and ApplicationsPergamon PressOxford 1992
The Physics and Mathematics of Adiabatic Shear BandsCambridgeCambridge University Press 2002
Dynamically propagating shear bands in impact-loaded prenotched plates-1 experimental investigations of temperature signatures and propagation speedJournal of the Mechanics and Physics of Solids 44 981 1996Google Scholar
The load-carrying capacity of circular plates at large deflectionJournal of Applied Mechanics 23 49 1956Google Scholar
Large deflections of rigid-plastic platesProceedings of the Eleventh International Congress of Applied Mechanics224 1964Google Scholar
A theoretical study of the dynamic plastic behaviour of beams and plates with finite-deflectionsInternational Journal of Solids and Structures 7 1007 1971Google Scholar
Dynamic plastic behaviour of structures under impact loading investigated by the extended Hamilton's principleInternational Journal of Solids and Structures 10 197 1974Google Scholar
The effect of geometry changes on the load carrying capacity of beams under transverse loadSIAM Journal of Applied Mathematics 25 500 1973Google Scholar
Plastic behaviour of ship structuresTransactions of the Society of Naval Architects and Marine Engineers 84 115 1976Google Scholar
Ship plating loaded beyond the elastic limitTransactions of the Institution of Naval Architects 101 143 1959Google Scholar
Limit analysis of rotationally symmetric plates and shellsPrentice-HallEnglewood Cliffs, N.J. 1963
The dynamic plastic behaviour of fully clamped rectangular platesInternational Journal of Solids and Structures 6 1499 1970Google Scholar
An experimental study of the dynamic plastic behaviour of rectangular platesSymposium on Plastic Analysis of Structurespub. Ministry of Education, Polytechnic Institute of JassyRomania476 1972
An experimental study into the dynamic plastic behaviour of wide beams and rectangular platesInternational Journal of Mechanical Sciences 13 721 1971Google Scholar
A mode solution for the finite deflections of a circular plate loaded impulsivelyRozprawy Inzynierskie, Engineering Transactions, Polish Akademia Nauk 29 99 1981Google Scholar
Circular plate under a uniformly distributed impulseInternational Journal of Solids and Structures 2 37 1966Google Scholar
Impulsive loading of a simply supported circular rigid plastic plateJournal of Applied Mechanics 35 59 1968Google Scholar
Consistent equations for the large deflections of structuresBulletin of Mechanical Engineering Education 10 9 1971Google Scholar
Membrane mode solutions for impulsively loaded circular platesJournal of Applied Mechanics 46 58 1979Google Scholar
Low velocity perforation of mild steel rectangular plates with projectiles having different shaped impact facesASME, Journal of Pressure Vessel Technology 130 031206031206 2008Google Scholar
Response and failure of ductile circular plates struck by a massTrans. ASME, Journal of Pressure Vessel Technology 119 332 1997Google Scholar
Experimental investigation into the dynamic plastic response and perforation of a clamped circular plate struck transversely by a massproceedings Institution of Mechanical Engineers 208 113 1994Google Scholar
Combined distributed loads on rigid-plastic circular plates with large deflectionsInternational Journal of Solids and Structures 5 51 1969Google Scholar
Behaviour of a rigid plastic beam loaded to finite deflections by a rigid circular indenterInternational Journal of Mechanical Sciences 23 387 1981Google Scholar
Finite deflections of a simply supported rigid-plastic annular plate loaded dynamicallyInternational Journal of Solids and Structures 4 593 1968Google Scholar
Damage estimates for plating of ships and marine vehiclesInternational Symposium on Practical Design in Shipbuilding (PRADS)Society of Naval Architects of JapanTokyo121 1977
Approximate solutions for impulsively loaded inelastic structures and continuaInternational Journal of Non-Linear Mechanics 5 143 1970Google Scholar
Large deformations of rigid-viscoplastic structures under impulsive and pressure loadingJournal of Structural Mechanics 1 295 1973Google Scholar
Dynamic plastic response of structuresPlasticity Today: Modelling Methods and ApplicationsElsevier Applied ScienceLondon788 1985
Influence of in-plane displacements at the boundaries of rigid-plastic beams and platesInternational Journal of Mechanical Sciences 15 547 1973Google Scholar
Effect of geometry changes on the carrying capacity of cylindrical shellsBulletin de l’Academie Polonaise des Sciences, Séries des Sciences Techniques 13 183 1965Google Scholar
On the influence of large deflections on the behaviour of rigid-plastic cylindrical shells loaded impulsivelyJournal of Applied Mechanics 37 416 1970Google Scholar
An approximate theoretical study of the dynamic plastic behaviour of shellsInternational Journal of Non-Linear Mechanics 7 255 1972Google Scholar
Laterally compressed metal tubes as impact energy absorbersStructural CrashworthinessButterworthsLondon1 1983
Plastic Theory of StructuresMIT PressCambridge, Mass 1971
Fundamental study of wave impact loads on ship bowJournal of the Society of Naval Architects of Japan 137 240 1975Google Scholar
105 47 1989 168
Pseudo-shakedown in the collision mechanics of shipsInternational Journal of Impact Engineering 24 19 2000Google Scholar
Damage estimate for plating of ships and platforms under repeated impactsMarine Structures 9 697 1996Google Scholar
Dynamic plastic response of structures with finite-deflections and saturation impulseProceedings of IUTAM Symposium on Impact DynamicsPeking University Press105 1994
Saturated impulse for pulse-loaded elastic-plastic square platesInternational Journal of Solids and Structures 34 1709 1997Google Scholar
Some interaction effects in a problem of plastic beam dynamics, Parts 1–3Journal of Applied Mechanics 34 623 1967Google Scholar
Impulsive loading of plastic beams with axial restraintsJournal of the Mechanics and Physics of Solids 6 186 1958Google Scholar
Plastic failure of ductile beams loaded dynamicallyTransactions of the ASME, Journal of Engineering for Industry 98 131 1976Google Scholar
Failure of aluminium beams under low velocity impactInternational Journal of Impact Engineering 35 1201 2008Google Scholar
On the dynamic inelastic failure of beamsStructural FailureJohn WileyNew York133 1989
Dynamic rupture of shellsStructural FailureJohn WileyNew York161 1989
Tearing of thin metal sheetsStructural FailureJohn WileyNew York107 1989
A study of the quasi-static tearing of thin metal sheetsInternational Journal of Mechanical Sciences 30 193 1988Google Scholar
Dynamic Plasticity of MetalsSpringerVienna and New York 1972
The effect of strain rate on the post-yield flow of mild steelJournal of the Mechanics and Physics of Solids 11 49 1963Google Scholar
Impulsive loading of fully clamped beams with finite plastic deflections and strain rate sensitivityInternational Journal of Mechanical Sciences 14 49 1972Google Scholar
Experimental and theoretical investigation of the plastic deformation of cantilever beams subjected to impulsive loadingJournal of Applied Mechanics 29 719 1962Google Scholar
Crashworthiness and biomechanics of vehicle impactDynamic Response of Biomechanical SystemsASME1 1970
Fundamental problems in viscoplasticityAdvances in Applied MechanicsAcademic Press243 1966
Dynamic plasticity: macroscopic and microscopic aspectsMaterials Science and Engineering 12 3 1973Google Scholar
Testing techniques and material behavior at high rates of strainMechanical Properties at High Rates of StrainInstitute of Physics Conference Series No. 471 1979
Testing Techniques at High Rates of StrainUniversity of Oxford 1980
Experimental and theoretical approaches to characterisation of material behaviour at high rates of deformationMechanical Properties at High Rates of StrainInstitute of Physics Conference Series No. 701 1984
ImpactEdward ArnoldLondon 1960
Material behavior at high strain ratesImpact DynamicsJohn WileyNew York277 1982
Compressive strain-rate tests on six selected materials at strain rates from 10−3 to 104 in/in/secJournal of Applied Mechanics 33 496 1966Google Scholar
Techniques for measuring stress–strain relations at high strain ratesExperimental Mechanics 6 395 1966Google Scholar
Influence of rate of strain and temperature on yield stresses of mild steelJournal of Applied Mechanics 11 211 1944Google Scholar
Yield and flow of low-carbon steel at medium strain ratesProceedings of the Conference on the Physical Basis of Yield and FractureInstitute of Physics and Physical SocietyLondon77 1966
Survey of Methods of Analysis for Plastic Deformation of Structures under Dynamic LoadingBrown University 1967
Tensile testing of materials at high rates of strainExperimental Mechanics 21 177 1981Google Scholar
The use of the double-notch shear test in determining the mechanical properties of uranium at very high rates of strainMechanical Properties at High Rates of StrainInstitute of Physics Conference Series No49 1979
The strain rate behaviour of iron in pure shearInternational Journal of Solids and Structures 5 533 1969Google Scholar
Shear-strain-rate effects in a high-strength aluminium alloyExperimental Mechanics 12 441 1972Google Scholar
Plastic Shear Properties of Metals and Alloys at High Strain RatesOxford University 1973
Some experimental results in dynamic plasticityMechanical Properties at High Rates of StrainInstitute of Physics Conference Series, No. 2172 1974
Dynamic biaxial stress–strain characteristics of aluminium and mild steelTransactions of the American Society for Metals 49 132 1957Google Scholar
Yielding of 6061-T6 aluminium tubings under dynamic biaxial loadingsExperimental Mechanics 19 200 1979Google Scholar
Influence of strain rate on mechanical properties of 6061-T6 aluminium under uniaxial and biaxial states of stressExperimental Mechanics 6 204 1966Google Scholar
A biaxial split Hopkinson bar for simultaneous torsion and compressionReview of Scientific Instruments 44 811 1973Google Scholar
The dynamic behaviour of mild steel in pure flexureProceedings of the Royal Society of London, Series A (Mathematical and Physical Sciences) 275 528 1963Google Scholar
The effect of loading rate on the elasto-plastic flexure of steel beamsProceedings of the Royal Society of London, Series A (Mathematical and Physical Sciences) 290 266 1966Google Scholar
The effect of strain rate upon the bending behaviour of materialsTransactions of the ASME, Journal of Engineering Materials and Technology 99 47 1977Google Scholar
Some remarks on the strain-rate sensitive behaviour of shellsProblems of PlasticityNoordhoffGroningen 2 403 1974
Strain hardening and strain-rate effects in the impact loading of cantilever beamsBrown University Division of Applied Mathematics Report No. 28 1957
Approximation techniques for impulsive loading of structures of time-dependent plastic behaviour with finite-deflectionsMechanical Properties of Materials at High Strain RatesInstitute of Physics Conference Series No. 21299 1974
Elastic–plastic response of 304 stainless steel beams to impulse loadsJournal of Applied Mechanics 45 685 1978Google Scholar
Ultimate Limit State Design of Steel Plated StructuresJohn Wiley and SonsLondon 2002
A First Course in Continuum MechanicsPrentice-HallEnglewood Cliffs, N.J 1969
Plasticity: Theory and ApplicationMacmillanNew York 1968
The propagation of longitudinal waves of plastic deformation in a bar of material exhibiting a strain rate effectJournal of Applied Mechanics 18 203 1951Google Scholar
Viscoplastic behavior in response of structures to dynamic loadingBehavior of Materials under Dynamic LoadingASME106 1965
On the determination of stress, strain, strain-rate relations from dynamic beam testsJournal of Applied Mechanics 36 632 1969Google Scholar
A mathematically tractable model of strain-hardening, rate-sensitive plastic flowJournal of Applied Mechanics 33 210 1966Google Scholar
A constitutive model and data for metals subjected to large strains, high strain rates and high temperaturesProceedings of the Seventh International Symposium on BallisticsThe HagueThe Netherlands541 1983
Structural aspects of ship collisionsStructural CrashworthinessButterworthsLondon308 1983
Dynamic axial crushing of square tubesInternational Journal of Impact Engineering 2 179 1984Google Scholar
Some comments on the modelling of material properties for dynamic structural plasticityInternational Conference on the Mechanical Properties of Materials at High Rates of StrainInstitute of Physics Conference Series No.435 1989
On a simplified method for solving impulsively loaded structures of rate-sensitive materialsJournal of Applied Mechanics 32 489 1965Google Scholar
Standard Mathematical TablesCRC PressCleveland, Ohio 1974
Approximation techniques for impulsively loaded structures of rate sensitive plastic behaviorSIAM Journal of Applied Mathematics 25 462 1973Google Scholar
A simplified method to account for plastic rate sensitivity with large deformationsJournal of Applied Mechanics 46 811 1979Google Scholar
Simplified large deflection mode solutions for impulsively loaded, viscoplastic, circular membranesJournal of Applied Mechanics 51 505 1984Google Scholar
Membrane mode solutions for impulsively loaded circular platesJournal of Applied Mechanics 46 58 1979Google Scholar
Experiments on viscoplastic response of circular plates to impulsive loadingJournal of the Mechanics and Physics of Solids 27 91 1979Google Scholar
The dynamic plastic behaviour of fully clamped rectangular platesInternational Journal of Solids and Structures 6 1499 1970Google Scholar
An experimental study into the dynamic inelastic behaviour of spherical shells and shell intersectionsArchiwum Budowy Maszyn 20 33 1973Google Scholar
Impulsively loaded strain-rate-sensitive platesJournal of Applied Mechanics 34 380 1967Google Scholar
Strain rate sensitivity of a mild steel at room temperature and strain rates of up to 105 s−1Journal of Strain Analysis 15 201 1980Google Scholar
Quasi-static and dynamic axial crushing of thin-walled circular stainless steel, mild steel and aluminium alloy tubesInternational Journal of Crashworthiness 9 195 2004Google Scholar
Stress–strain properties of structural steel at strain rates of up to 105 per second at sub-zero, room and high temperaturesMechanics of Materials 3 245 1984Google Scholar
Dynamic problems for elastic–plastic solids with delayed yieldingInternational Journal of Solids and Structures 7 143 1971Google Scholar
Loading rate spectra for fracture initiation in metalsTheoretical and Applied Fracture Mechanics 1 181 1984Google Scholar
Fracture initiation under impactInternational Journal of Impact Engineering 3 191 1985Google Scholar
Analyses of high velocity tension of bars of finite length of BCC and FCC metals with their own constitutive equationsHigh Velocity Deformation of SolidsSpringerNew York1 1977
Dynamic pre-strain and inertia effects on the fracture of metalsJournal of the Mechanics and Physics of Solids 28 17 1980Google Scholar
Inertia effects on the ductile failure of thin ringsJournal of Applied Mechanics 49 31 1982Google Scholar
Influence of strain rate on the flow stress and ductility of copper and tantalum at room temperatureMechanical Properties at High Rates of StrainInstitute of Physics Conference Series No. 7063 1984
Steel mechanical properties at different strain ratesTransactions of the ASCE, Journal of Structural Engineering 113 663 1987Google Scholar
Influence of hydrostatic stress on failure of axisymmetric notched specimensJournal of the Mechanics and Physics of Solids 47 643 1999Google Scholar
On the dynamic inelastic failure of beamsStructural FailureJohn Wiley133 1989
Some analytical and experimental investigations on high velocity elongation of sheet materials by tensile shockProceedings IUTAM Symposium on Behaviour of Dense Media under High Dynamic PressuresDunod, Paris313 1968
Dynamic uniaxial and biaxial stress-strain relationships for austenitic stainless steelsNuclear Engineering and Design 57 107 1980Google Scholar
Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressuresEngineering Fracture Mechanics 21 31 1985Google Scholar
Dynamic axial crushing of circular tubesInternational Journal of Impact Engineering 2 263 1984Google Scholar
The crumpling of tubular structures under impact conditionsProceedings of the Symposium on The Use of Aluminium in Railway Rolling StockInstitute of Locomotive Engineers, The Aluminium Development AssociationLondon33 1960
Dynamic axial crushing of square tubesInternational Journal of Impact Engineering 2 179 1984Google Scholar
An assessment of energy absorbing devices for prospective use in aircraft impact situationsDynamic Response of StructuresPergamonNew York225 1972
Note on the instability of tubes subjected to end pressure, and on the folds in a flexible materialProceedings of the Royal Society of London, Series A (Mathematical and Physical Sciences) 81 388 1908Google Scholar
The quasi-static crumpling of thin-walled circular cylinders and frusta under axial compressionInternational Journal of Mechanical Sciences 25 713 1983Google Scholar
Dynamic progressive buckling of circular and square tubesInternational Journal of Impact Engineering 4 243 1986Google Scholar
An approximate analysis of the collapse of thin cylindrical shells under axial loadingQuarterly Journal of Mechanics and Applied Mathematics 13 10 1960Google Scholar
The large scale crumpling of thin cylindrical columnsQuarterly Journal of Mechanics and Applied Mathematics 13 1 1960Google Scholar
Energy absorption by structural collapseStructural CrashworthinessButterworthsLondon96 1983
The effective crushing distance in axially compressed thin-walled metal columnsInternational Journal of Impact Engineering 1 309 1983Google Scholar
Yield and flow of low-carbon steel at medium strain ratesProceedings of the Conference on the Physical Basis of Yield and FractureInstitute of Physics and Physical Society77 1966
On the crushing mechanics of thin-walled structuresJournal of Applied Mechanics 50 727 1983Google Scholar
Crushing behaviour of plate intersectionsStructural CrashworthinessButterworthsLondon66 1983
Experimental–theoretical correlation of dynamically crushed components of bus frame structuresProceedings of the Seventeenth International FISITA CongressBudapest 1978
Impact Strength of MaterialsEdward ArnoldLondon and Crane, Russak, New York 1972
Crashworthiness of VehiclesMEPLondon 1978
Introduction to Impact EngineeringChapman & HallLondon 1987
Survey of rotary-wing aircraft crashworthinessDynamic Response of StructuresPergamonOxford179 1972
Dynamic plastic energy absorption in vehicle impactRozprawy Inzynierskie, Engineering Transactions 29 83 1981Google Scholar
Structural CrashworthinessButterworthsLondon 1983
The development of a theoretical technique for rail vehicle structural crashworthinessProceedings of the Institution of Mechanical Engineers 201 123 1987Google Scholar
Railway passenger vehicle design loads and structural crashworthinessProceedings of the Institution of Mechanical Engineers 201 201 1987Google Scholar
Analysis of the forces on a nuclear fuel transport flask in an impact by a trainProceedings of the Institution of Mechanical Engineers 201 55 1987Google Scholar
Dynamic plastic failure of a free–free beamInternational Journal of Impact Engineering 6 225 1987Google Scholar
Crushing analysis of metal honeycombsInternational Journal of Impact Engineering 1 157 1983Google Scholar
A theoretical analysis for the quasi-static axial crushing of top-hat and double-hat thin-walled sectionsInternational Journal of Mechanical Sciences 41 209 1999Google Scholar
A theoretical analysis for the dynamic axial crushing of top-hat and double-hat thin-walled sectionsProceedings, Institution of Mechanical Engineers 213 307 1999Google Scholar
Experimental quasi-static axial crushing of top-hat and double-hat thin-walled sectionsInternational Journal of Mechanical Sciences 41 179 1999Google Scholar
Experimental study into the energy absorbing characteristics of top-hat and double-hat sections subjected to dynamic axial crushingProceedings, Institution of Mechanical Engineers 213 259 1999Google Scholar
Some phenomena in the structural crashworthiness fieldInternational Journal of Crashworthiness 4 335 1999Google Scholar
Experimental and numerical study in axial crushing of thin walled sections made of high-strength steelsJournal Physics IV France 110 717 2003Google Scholar
Impact of thin-walled high-strength steel structural sectionsproceedings, Institution of Mechanical Engineers 218 131 2004Google Scholar
Axial crushing of thin-walled high-strength steel sectionsInternational Journal of Impact Engineering 32 847 2006Google Scholar
Human impact tolerance, SAE paper 700398International Automobile Safety Conference CompendiumSAE712 1970
Human tolerance limitations related to aircraft crashworthinessDynamic Response of StructuresPergamonNew York247 1972
Dynamic response and protection of the human body and skull in impact situationsPerspectives in BiomechanicsHarwood531 1978
Biomechanical problems related to vehicle impactBiomechanics: Its Foundations and ObjectivesPrentice-HallEnglewood Cliffs, N.J567 1972
Biomechanical and structural aspects of design for vehicle impactHuman Body Dynamics, Impact, Occupational and Athletic AspectsClarendonOxford181 1982
Aspects of car design and human injury. ClarendonOxford164 1982
Crashworthiness and Occupant Protection in Transportation Systems, American Society of Mechanical Engineers 30 560 1995
Vehicle Crash MechanicsCRC PressLondon and New York 2002
Changes in the impact energy absorption of bone with ageJournal of Biomechanics 12 459 1979Google Scholar
Current controversies in the stipulation of head injury criteriaJournal of Biomechanics 14 883 1981Google Scholar
Layered sacrificial claddings in design of blast resistant structures: an analytical studyPlasticity and Impact MechanicsNew Age International PublishersNew Delhi, India519 1997
Layered sacrificial claddings under blast loading Part 1: analytical studiesInternational Journal of Impact Engineering 24 957 2000Google Scholar
Energy absorption of a layered cladding under blast loading, Proceedings, 6th International Conference on Structures under Shock and ImpactStructures under Shock and Impact VIWIT PressSouthampton, U.K., Boston, U.S447 2000
Layered sacrificial claddings under blast loading. Part 2: experimental studiesInternational Journal of Impact Engineering 24 975 2000Google Scholar
Energy absorption of double-layer foam cladding for blast alleviationInternational Journal of Impact Engineering 34 329 2007Google Scholar
Fracture of aluminium foam core sacrificial cladding subjected to air-blast loadingInternational Journal of Impact Engineering 37 638 2010Google Scholar
Experimental and numerical analysis of tube-core claddings under blast loadsInternational Journal of Impact Engineering 37 333 2010Google Scholar
Compressive response of multilayered pyramidal lattices during underwater shock loadingInternational Journal of Impact Engineering 35 1102 2008Google Scholar
Classification of the axial collapse of cylindrical tubes under quasi-static loadingInternational Journal of Mechanical Sciences 25 687 1983Google Scholar
Jones, N., Transition from initial global bending to progressive buckling of tubes loaded statically and dynamicallyInternational Journal of Impact Engineering 19 415 1997Google Scholar
Experimental investigations on the behaviour of short to long square aluminium tubes subjected to axial loadingInternational Journal of Impact Engineering 30 973 2004Google Scholar
Quasi-static and dynamic axial crushing of thin-walled circular stainless steel, mild steel and aluminium alloy tubesInternational Journal of Crashworthiness 9 195 2004Google Scholar
A moving hinge solution for axisymmetric crushing of tubesInternational Journal of Mechanical Sciences 28 135 1986Google Scholar
A plastic collapse mechanism for cylinders under uniaxial end compressionJournal of Constructional Steel Research 1 23 1981Google Scholar
Axial crushing of multi-corner sheet metal columnsJournal of Applied Mechanics 111 113 1989Google Scholar
Some considerations in axisymmetric folding of metallic round tubesInternational Journal of Impact Engineering 25 331 2001Google Scholar
Axial crushing analysis of tubes deforming in the multi-lobe modeInternational Journal of Mechanical Sciences 41 865 1999Google Scholar
Solution stability in the dynamic collapse of square aluminium columnsInternational Journal of Impact Engineering 34 348 2007Google Scholar
Crushing analysis of polygonal columns and angle elementsInternational Journal of Impact Engineering 37 441 2010Google Scholar
Dynamic crushing strength of hexagonal honeycombsInternational Journal of Impact Engineering 37 467 2010Google Scholar
Dynamic crushing of honeycombs and features of shock frontsInternational Journal of Impact Engineering 36 165 2009Google Scholar
Analysis of collapse behaviour of combined geometry metallic shells under axial impactInternational Journal of Impact Engineering 35 731 2008Google Scholar
Buckling transition of axially impacted open shellsInternational Journal of Impact Engineering 30 1241 2004Google Scholar
Influence of forming effects on the axial crush response of hydroformed aluminium alloy tubesInternational Journal of Impact Engineering 37 1008 2010Google Scholar
Energy Absorption of Structures and MaterialsCRC Press, Woodhead Publishing LtdCambridge, UK 2003
The energy-absorbing characteristics of tubular stuctures with geometric and material modifications; an overviewApplied Mechanics Reviews, Transactions ASME 61 020802020802 2008Google Scholar
Energy Absorption by Foam-Filled StructuresSAE CongressDetroit 1980
Static and dynamic axial crushing of foam-filled sheet metal tubesInternational Journal of Mechanical Sciences 28 295 1986Google Scholar
Axial crushing of foam-filled tapered sheet metal tubesInternational Journal of Mechanical Sciences 28 643 1986Google Scholar
Static and dynamic crushing of square aluminium extrusions with aluminium foam fillerInternational Journal of Impact Engineering 24 347 2000Google Scholar
Experimental and numerical studies of foam-filled sectionsInternational Journal of Impact Engineering 24 509 2000Google Scholar
Energy-absorbing effectiveness factorInternational Journal of Impact Engineering 37 754 2010Google Scholar
Inextensional collapse of thin-walled tubes under axial compressionJournal of Strain Analysis 12 317 1977Google Scholar
Dynamic plastic bucklingProceedings of the International Conference on Dynamic Stability of StructuresPergamonNew York189 1967
Dynamic axial crushing of circular tubesInternational Journal of Impact Engineering 2 263 1984Google Scholar
Dynamic flexural buckling of rods within an axial compression waveJournal of Applied Mechanics 33 241 1966Google Scholar
Dynamic plastic buckling of rings and cylindrical shellsNuclear Engineering and Design 37 125 1976Google Scholar
Theory of Elastic StabilityMcGraw-HillNew York 1961
The plastic buckling of thin-walled tubes subject to magnetomotive forcesJournal of Mechanical Engineering Science 16 59 1974Google Scholar
Critical velocity for collapse of viscoplastic cylindrical shells without bucklingTransactions of the ASME, Journal of Applied Mechanics 44 89 1977Google Scholar
Consistent equations for the large deflections of structuresBulletin of Mechanical Engineering Education 10 9 1971Google Scholar
Dynamic pulse buckling: theory and experimentSRI International Report to Defense Nuclear AgencyWashington 1982
1975
Dynamic plastic flow buckling of a cylindrical shell from uniform radial impulseProceedings of the Fourth U.S. National Congress of Applied MechanicsASMEBerkeley939 1962
Stability Theory and Its Applications to Structural MechanicsNoordhoffLeyden 1974
Buckling of Bars, Plates and ShellsMcGraw-HillNew York 1975
Dynamic buckling of viscoplastic cylindrical shellsInelastic Behaviour of SolidsMcGraw-HillNew York471 1970
Buckling of short viscoplastic cylindrical shells subjected to radial impulseInternational Journal of Non-Linear Mechanics 8 325 1973Google Scholar
The crumpling of tubular structures under impact conditionsProceedings of the Symposium on the Use of Aluminium in Railway Rolling StockInstitution of Locomotive Engineers, The Aluminium Development AssociationLondon33 1960
Dynamic plastic buckling of cylindrical shells in sustained axial compressive flowTransactions of the ASME, Journal of Applied Mechanics 35 80 1968Google Scholar
Engineering PlasticityVan Nostrand ReinholdLondon 1973
Dynamic buckling of a visco-plastic cylindrical shell subjected to axial impactArchives for Mechanics 23 73 1971Google Scholar
Dynamic axial plastic buckling of stringer stiffened cylindrical shellsInternational Journal of Mechanical Sciences 24 1 1982Google Scholar
Critical velocity for collapse of a shell of circular cross section without bucklingTransactions of the ASME, Journal of Applied Mechanics 41 407 1974Google Scholar
Mushrooming of circular tubes under dynamic axial loadingThin-Walled Structures 40 167 2002Google Scholar
Dynamic elastic and inelastic buckling of shellsDevelopments in Thin-Walled StructuresElsevier Applied ScienceLondon and New York49 1984
Dynamic buckling of complete rigid-plastic spherical shellsJournal of Applied Mechanics 41 609 1974Google Scholar
Dynamic elastic and plastic buckling of complete spherical shellsInternational Journal of Solids and Structures 10 1357 1974Google Scholar
Dynamic buckling of elastic-plastic complete spherical shells under step loadingInternational Journal of Impact Engineering 1 51 1983Google Scholar
On finite element large displacement and elastic-plastic dynamic analysis of shell structuresComputers and Structures 12 309 1980Google Scholar
Viscoplastic axisymmetrical buckling of spherical shell subjected to radial pressure impulseEngineering Structures 3 168 1981Google Scholar
Dynamic buckling of viscoplastic spherical shellInternational Journal of Solids and Structures 20 761 1984Google Scholar
Nonlinear dynamic buckling of spherical caps with initial imperfectionsComputers and Structures 12 49 1980Google Scholar
On the dynamic buckling of a simple elastic-plastic modelInternational Journal of Solids and Structures 16 969 1980Google Scholar
Dynamic buckling of a simple elastic-plastic model under pulse loadingInternational Journal of Non-Linear Mechanics 27 981 1992Google Scholar
Dynamic pulse buckling of a simple elastic-plastic model including axial inertiaInternational Journal of Solids and Structures 29 1255 1992Google Scholar
Some observations on the dynamic elastic-plastic buckling of a structural modelInternational Journal of Impact Engineering 16 621 1995Google Scholar
Strain-rate effects in the dynamic buckling of a simple elastic-plastic modelTransactions ASME, Journal of Applied Mechanics 64 193 1997Google Scholar
A note on the inertia and strain rate effects in the Tam and Calladine modelInternational Journal of Impact Engineering 16 637 1995Google Scholar
Inertia and strain rate effects in a simple plate structure under impact loadingInternational Journal of Impact Engineering 11 349 1991Google Scholar
A note on a “velocity sensitive” energy-absorbing structureInternational Journal of Impact Engineering 8 51 1989Google Scholar
Multi-degrees of freedom model for dynamic buckling of an elastic-plastic structureInternational Journal of Solids and Structures 33 3377 1996Google Scholar
Dynamic buckling of columns due to slamming loadsProceedings 4th International Conference on Structures Under Shock and Impact, Structures under Shock and Impact IVComputational Mechanics PublicationsSouthampton and Boston311 1996
Dynamic response, buckling and collapsing of elastic-plastic straight columns under axial solid-fluid slamming compression-1, experimentsInternational Journal of Solids and Structures 29 381 1992Google Scholar
Dynamic elastic-plastic buckling phenomena in a rod due to axial impactInternational Journal of Impact Engineering 18 919 1996Google Scholar
Several phenomena in structural impact and structural crashworthinessEuropean Journal of Mechanics A/Solids 22 693 2003Google Scholar
An experimental study on the dynamic axial plastic buckling of cylindrical shellsInternational Journal of Impact Engineering 1 249 1983Google Scholar
Dynamic plastic pulse buckling beyond strain-rate reversalJournal of Applied Mechanics 42 411 1975Google Scholar
Inertia effects in axisymmetrically deformed cylindrical shells under axial impactInternational Journal of Impact Engineering 24 1083 2000Google Scholar
Dynamic effects on buckling and energy absorption of cylindrical shells under axial impactThin-Walled Structures 39 583 2001Google Scholar
Influence of stress waves on the dynamic progressive and dynamic plastic buckling of cylindrical shellsInternational Journal of Solids and Structures 38 6723 2001Google Scholar
On dynamic buckling phenomena in axially loaded elastic-plastic cylindrical shellsInternational Journal of Non-Linear Mechanics 37 1223 2002Google Scholar
On the dynamic collapse of circular and square tubes under axial impactAdvances in Dynamics and Impact MechanicsWIT PressSouthampton and Boston1 2003
Dynamic buckling of elastic-plastic square tubes under axial impact. Part I – stress wave propagation phenomenonInternational Journal of Impact Engineering 30 143 2004Google Scholar
Dynamic buckling of elastic-plastic square tubes under axial impact. Part II – structural responseInternational Journal of Impact Engineering 30 167 2004Google Scholar
Dynamic elastic-plastic buckling of structural elements: a reviewApplied Mechanics Reviews, Transactions ASME 61 040803040803 2008Google Scholar
The energy-absorbing characteristics of tubular stuctures with geometric and material modifications; an overviewApplied Mechanics Reviews, Transactions ASME 61 020802020802 2008Google Scholar
Bifurcation and uniqueness in dynamics of elastic-plastic continuaInternational Journal of Engineering Science 13 69 1975Google Scholar
Quasi-bifurcation in dynamics of elastic-plastic continuaJournal of Applied Mechanics 44 413 1977Google Scholar
On dynamic stability and quasi-bifurcationInternational Journal of Nonlinear Mechanics 16 79 1981Google Scholar
Dynamic buckling of an inelastic columnInternational Journal of Solids and Structures 17 271 1981Google Scholar
Dynamic buckling of inelastic spherical shellsTransactions of the ASME, Journal of Pressure Vessel Technology 104 79 1982Google Scholar
Counterintuitive behaviour in a problem of elastic-plastic beam dynamicsJournal of Applied Mechanics 52 517 1985Google Scholar
Experimental results on the counter-intuitive behaviour of thin clamped beams subjected to projectile impactInternational Journal of Impact Engineering 11 341 1991Google Scholar
Velocity and mass sensitivity of circular and square tubes under axial impactPlasticity and Impact Mechanics 2003 Phoenix Publishing HouseNew Delhi403
Transition from progressive buckling to global bending of circular shells under axial impact- part 1; experimental and numerical observationsInternational Journal of Solids and Structures 41 1565 2004Google Scholar
Quasi-static and dynamic axial crushing of thin-walled circular stainless steel, mild steel and aluminium alloy tubesInternational Journal of Crashworthiness 9 195 2004Google Scholar
Transition from local to global buckling: quasi-static and dynamic experimental resultsPlasticity and Impact Mechanics 2003 Phoenix Publishing HouseNew Delhi118
Experimental investigations on the behaviour of short to long square aluminium tubes subjected to axial loadingInternational Journal of Impact Engineering 30 973 2004Google Scholar
On the mechanics of the global bending collapse of circular tubes under dynamic axial load – dynamic buckling transitionInternational Journal of Impact Engineering 35 397 2008Google Scholar
Transition between progressive and global buckling of aluminium extrusionsproceedings 7th International Conference on Structures Under Shock and Impact, Structures under Shock and Impact V11WIT PressSouthampton and Boston269 2002
Dynamic similitude of underground structuresProceedings of the ASCE, Journal of the Engineering Mechanics Division 90 111 1964Google Scholar
Scaling laws for fuel capsules subjected to blast, impact and thermal loading, SAE paper 719107Proceedings of the Intersociety Energy Conversion Engineering Conference775 1971Google Scholar
1983
Structural aspects of ship collisionsStructural CrashworthinessButterworthsLondon308 1983
Parametric influences on the response of structural shellsTransactions of the ASME, Journal of Engineering for Industry 97 1311 1975Google Scholar
Impact Strength of MaterialsEdward ArnoldLondon and Crane Russak, New York 1972
Impact scalability of plated steel structuresStructural CrashworthinessButterworthsLondon136 1983
Similitude Studies of Re-entry Vehicle Response to Impulsive LoadingSouthwest Research Institute 1963
Engineering Materials: An Introduction to Their Properties and ApplicationsPergamonOxford 1980
Similarity principles in structural mechanicsInternational Journal of Mechanical Engineering Education 2 1 1974Google Scholar
A survey of procedures for dimensional analysisInternational Journal of Mechanical Engineering Education 11 147 1983Google Scholar
Engineering Applications of Fluid MechanicsMcGraw-HillNew York 1947
Experimental verification of scaling laws for punch-impact-loaded structuresInternational Journal of Impact Engineering 2 103 1984Google Scholar
Structural damage in airship and rolling stock collisionsStructural CrashworthinessButterworthsLondon417 1983
Suggestion of a new dimensionless number for dynamic plastic response of beams and platesArchives of Applied Mechanics 68 524 1998Google Scholar
On dimensionless numbers for dynamic plastic response of structural membersArchives of Applied Mechanics 70 245 2000Google Scholar
Application of response number for dynamic plastic response of plates subjected to impulsive loadingInternational Journal of Pressure Vessels and Piping 77 711 2000Google Scholar
Generalisation of response number for dynamic plastic response of shells subjected to impulsive loadingInternational Journal of Pressure Vessels and Piping 78 453 2001Google Scholar
Scaling the impact of a mass on a structureInternational Journal of Impact Engineering 32 1158 2006Google Scholar
Scaling of cylindrical shells under axial impactInternational Journal of Impact Engineering 34 89 2007Google Scholar
The laws of similitude and crack propagationInternational Journal of Mechanical Sciences 16 541 1974Google Scholar
Scale effects and crack propagation in non-linear elastic structuresInternational Journal of Mechanical Sciences 17 673 1975Google Scholar
Crack propagation in non-proportionally scaled elastic structuresInternational Journal of Mechanical Sciences 20 437 1978Google Scholar
Engineering Materials ScienceWadsworthBelmont, Calif 1961
Interfacial cracking of a composite, Part 3 CompressionJournal of Materials Science 11 1267 1976Google Scholar
Complexities of compression failureProceedings of the Royal Society of London, Series A Mathematical and Physical Sciences 361 245 1978Google Scholar
Quasi-static crack propagationProceedings of the Royal Society of London, Series A Mathematical and Physical Sciences 299 508 1967Google Scholar
Scaling of inelastic structures loaded dynamicallyStructural Impact and CrashworthinessElsevier Applied ScienceLondon45 1984
The correlation of fracture transitionsJournal of Physics D Applied Physics 13 2249 1980Google Scholar
Indentation fracture transitions in polymethylmethacrylateJournal of Physics D Applied Physics 16 621 1983Google Scholar
Elastic and Plastic FractureEllis Horwood, Chichester and John WileyNew York 1984
1985
On the scaling of ship collision damageInternational Maritime Association of the East Mediterranean, Third International Congress on Marine TechnologyAthens287 1984
A study of plate tearing for ship collision and grounding damageJournal of Ship Research 31 253 1987Google Scholar
A study of the quasi-static tearing of thin metal sheetsInternational Journal of Mechanical Sciences 30 193 1988Google Scholar
On the cutting of a plate by a wedgeInternational Journal of Mechanical Sciences 32 293 1990Google Scholar
Closed-form solution for wedge cutting force through thin metal sheetsInternational Journal of Mechanical Sciences 35 209 1993Google Scholar
An experimental study on the scaling of plate cuttingInternational Journal of Impact Engineering 21 645 1998Google Scholar
Cutting of a longitudinally stiffened plate by a wedgeJournal of Ship Research 38 340 1994Google Scholar
A benchmark study on crushing and cutting of plated structuresJournal of Ship Research 41 147 1997Google Scholar
Ultimate Limit State Design of Steel Plated StructuresJohn Wiley and Sons Ltd.London 2002
Experimental investigation of the scaling laws for metal plates struck by large massesInternational Journal of Impact Engineering 13 485 1993Google Scholar
A study on the large ductile deformations and perforation of mild steel plates struck by a mass. Part II: discussionTransactions ASME, Journal of Pressure Vessel Technology 119 185 1997Google Scholar
On the scaling of low-velocity perforation of mild steel plates, TransactionsASME, Journal of Pressure Vessel Technology 130 031207031207 2008Google Scholar
Quadrangular plates subjected to localised blast loads – an insight into scalingPlasticity and Impact Mechanics 2003 Phoenix Publishing HouseNew Delhi769
Scaling aspects of quadrangular plates subjected to localised blast loads – experiments and predictionsInternational Journal of Impact Engineering 30 1179 2004Google Scholar
Simplified analysis of square plates under explosion loadingAdvances in Dynamics and Impact MechanicsWIT PressSouthampton and Boston167 2003
On the simplified analysis ofsquare plates under explosion loading, Professional Engineering Publishing Limited225 2003
Scaling of pulse loaded mild steel plates with different edge restraintInternational Journal of Mechanical Sciences 46 1267 2004Google Scholar
An experimental study on the lateral impact of fully clamped mild steel pipesProceedings of the Institution of Mechanical Engineers, Journal of Process Mechanical Engineering 206 111 1992Google Scholar
Low-velocity impact of pressurised pipelinesInternational Journal of Impact Engineering 37 207 2010Google Scholar
Influence of internal pressure on the impact behaviour of steel pipelinesTransactions ASME, Journal of Pressure Vessel Technology 118 464 1996Google Scholar
Experimental investigation into scaling laws for conical shells struck by projectilesInternational Journal of Impact Engineering 32 1284 2006Google Scholar
Size effects in the axial tearing of circular tubes during quasi-static and impact loadingsInternational Journal of Impact Engineering 32 2048 2006Google Scholar
Scale Models in EngineeringPergamonOxford 1977
Similitude and ModellingElsevierAmsterdam 1980
The impact behaviour of aluminium alloy and mild steel double-shear specimensInternational Journal of Mechanical Sciences 30 153 1988Google Scholar
Static and dynamic collapse characteristics of scale model corrugated tubular sectionsTransactions of the ASME, Journal of Engineering Materials and Technology 97 357 1975Google Scholar
Some comments on the scaling of inelastic structures loaded dynamicallySize-Scale Effects in the Failure Mechanisms of Materials and StructuresTurin, E. and F. N. SponLondon541 1996
Scaling in combined plastic flow and fractureInternational Journal of Mechanical Sciences 30 173 1988Google Scholar
Letter to the Editor on Reference 11.44International Journal of Impact Engineering 16 525 1995Google Scholar
Note on scaling in rigid-plastic fracture mechanicsInternational Journal of Mechanical Sciences 32 547 1990Google Scholar
The impact behaviour of aluminium alloy and mild steel double-shear specimensInternational Journal of Mechanical Sciences 30 153 1988Google Scholar
A method for scaling ballistic penetration phenomenaInternational Journal of Impact Engineering 19 821 1997Google Scholar
An investigation of impact scaling theoryStructural CrashworthinessButterworthsLondon169 1983
Strain-rate and inertia effects in the collapse of two types of energy-absorbing structureInternational Journal of Mechanical Sciences 26 689 1984Google Scholar
Scaling of Structural StrengthHermes Penton LtdLondon 2002
A logic of dimensional analysisJournal of Physics A Mathematical and General 15 1991 1982Google Scholar
The Systematic ExperimentCambridge University PressCambridge 1986
Mode approximations for impulsively-loaded rigid-plastic structuresProceedings of the ASCE, Journal of the Engineering Mechanics Division 92 43 1966Google Scholar
Quasi-static analysis of structural impact damageJournal of Constructional Steel Research 33 151 1995Google Scholar
A comment on the low speed impact of a clamped beam by a heavy strikerMechanics, Structures and Machines 19 527 1991Google Scholar
Bounds for large plastic deformations of dynamically loaded continua and structuresInternational Journal of Solids and Structures 17 183 1981Google Scholar
Accuracy of bounds of plastic deformation for dynamically loaded plates and shellsInternational Journal of Mechanical Sciences 27 97 1985Google Scholar
Revised lower displacement bounds of impulsively-loaded rigid-plastic structuresMechanics Research Communications 12 257 1985Google Scholar
On Huang Zhuping's theorem for a lower displacement boundMechanics Research Communications 12 265 1985Google Scholar
Bounds on the dynamic plastic behaviour of structures including transverse shear effectsInternational Journal of Impact Engineering 3 273 1985Google Scholar
The optimal mode and an approximate expression of final displacement in dynamic plastic response of structuresTrans. ASME, Journal of Applied Mechanics 59 33 1992Google Scholar
- 1
- Cited by