Hostname: page-component-76fb5796d-25wd4 Total loading time: 0 Render date: 2024-04-25T15:42:14.216Z Has data issue: false hasContentIssue false
  • English
  • Français

Low Dielectric Constant Fluorine Doped Teos Films

Published online by Cambridge University Press:  15 February 2011

Viren V. S. Rana ,
Mohan Bhan ,
Anand Gupta ,
Soonil Hong  and
Peter Lee
Viren V. S. Rana
Affiliation:
Applied Materials, Inc., 3050 Bowers Ave, Santa Clara, CA 95054.
Mohan Bhan
Affiliation:
Applied Materials, Inc., 3050 Bowers Ave, Santa Clara, CA 95054.
Anand Gupta
Affiliation:
Currently at SpeedFam Corporation, 7406 W. Detroit, Chandler, AZ 85226.
Soonil Hong
Affiliation:
Applied Materials, Inc., 3050 Bowers Ave, Santa Clara, CA 95054.
Peter Lee
Affiliation:
Applied Materials, Inc., 3050 Bowers Ave, Santa Clara, CA 95054.
Get access

Abstract

The fluorine doped TEOS films obtained using an inorganic gaseous dopant source (SiF4) and an organic liquid dopant source (TEFS) are described. The stability of fluorine in these films is strongly dependent on process conditions. The limit of stability for the most stable films is described. The gap fill capability of these films was found to depend strongly on the type of the fluorine precursor.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 476: Symposium N – Low-Dielectric Constant Materials III , 1997 , 239
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bohr, Mark T., Proc. IEDM, pp. 241–244, (1995).Google Scholar
2. Ting, C. H., Leu, J., Lee, J. K., Kasthurirangan, J., Liao, C. N., and Ho, P. S. in Advanced Metalization for ULSI Application in 1994, Ed. Blumenthal, R. and Janssen, G. (Materials Research Society, Pittsburgh, PA, 1995), pp. 351–360.Google Scholar
3. Murarka, S. P., Solid State Technology, pp. 83–90, March 1996.Google Scholar
4. Oyamatsu, H., Kasai, K., Matsunaga, N., Igarashi, H., Yamaguchi, T., Asamura, T., Azuma, A., Shibata, H., Kinugawa, M., and Kakumu, M., Proc. IEDM, pp. 705–708, (1995).Google Scholar
5. Igarashi, H., Oyamatsu, H., Kodera, M., Kaji, N., Matsuno, T., Shibata, H., Kinugawa, M., and Kakumu, M., Symp. on VLSI Tech., pp. 84–85, (1996).Google Scholar
6. Ida, J., Yoshimaru, M., Usami, T., Ohtomo, A., Shimokawa, K., Kita, A, and Ino, M., Symp. on VLSI Tech., pp. 59–60, (1994).Google Scholar
7. Saproo, A., Denison, D.R. and Lam, J., Proc. of 2nd DUMIC Int. Conf., p. 231, (1996).Google Scholar
8. Mizuno, S., Verma, A., Tran, H., Lee, P. and Nguyen, B., Thin Solid films, 283, p. 30, (1996).Google Scholar
9. Usami, T., Shimokawa, K., and Yoshimaru, M., Jpn. J. App. Phys. Vol 33, pp. 408–412, (1994).Google Scholar
10. Carl, D., Yoo, W. S., Swope, R., Schuchmann, S., H. te Nijenhuis, Harms, A., and van den Hoek, W. in Advanced Metalization for ULSI Application in 1994. Ed. Blumenthal, R. and Janssen, G. (Materials Research Society, Pittsburgh, PA, 1995), pp. 45–52.Google Scholar
11. Usami, T., Jpn. J. Appl. Phys., 33, p. 408 (1994).Google Scholar
12. Hsieh, Y-T, Tseng, W-T, Dai, B-T, Chang, T-C, Mei, Y-J, Sheu, J-D, Lin, C. C-F, Feng, M-S, and Yung, H-J, Proc. IEEE DUMIC, pp 287–294, (1996).Google Scholar
13. Hayasaka, N., Miyajima, H, Nakasaki, H., and Katsumata, R. in Advanced Metalization for ULSI Application in 1995, Ed. Ellwanger, R. C and Wang, Shi-Qing (Materials Research Society, Pittsburgh, PA, 1996), pp. 81–88.Google Scholar
14. Kitoh, H., Muroyama, M., Sasaki, M., Iwasawa, M., Jpn. J. App. Phys., vol 35, pp.1464–1467, (1996).Google Scholar
15. Lee, S. and Park, J. W., J. Appl. Phys., 80, p. 5260, (1996).Google Scholar
16. Laxman, R. K., Vrtis, R. N., Hochberg, A. K. in Advanced Metalization for ULSI Application in 1995, Ed. Ellwanger, R. C and Wang, Shi-Qing (Materials Research Society, Pittsburgh, PA, 1996), pp. 115–119.Google Scholar
17. Yoo, W. S., Swope, R., Sparks, B., and Mordo, D., Proc. IEEE DUMIC, pp. 110–112, (1996).Google Scholar
18. Wise, M. L., Sneh, O., Okada, L.A. and George, S.M., J. Vac. Sci. Tech. B 13 (3), p. 865, (1995).Google Scholar
19. Shimogaki, Y., Lim, S.W., Nakono, Y., Tada, K. and Komiyama, H., Proc. of 3rd DUMIC Int. Conf., p. 189, (1997).Google Scholar
20. Tamura, T., Inoue, Y., Satoh, M. and Sakai, J.,, Proc. of 3rd DUMIC Int. Conf., p. 289, (1997).Google Scholar
21. Koizumi, S., Shimokawa, K. and Yoshimaru, M., Technical Report of IEICE, SDM95–180, p. 41,(1995).Google Scholar
22. Bhan, M. K., Huang, J., and Cheung, D., Presented at ICMCTF Conference at San Diego, CA, April -, 1997, Proceedings will publish in Thin Solid films. Google Scholar
23. Kaneta, C., Extended Abstract 56th Meeting of Jpn. Soc. Of Appl. Phys. Kanazawa, August (1995) 26-ZB-3.Google Scholar