The vitric matrix of pre-caldera acid tuff and tuff breccia of the Santorini volcano, Aegean Sea, Greece has been generally replaced by one or more of the following authigenic minerals: K-rich and (K,Ca)-rich clinoptilolite, mordenite, opal-CT, and clay minerals. Halite is also present in some samples. Initial compositional inhomogeneities between the dacitic blocks in tuff breccia and tuff seem to have controlled the type of K-rich heulandite-group zeolite that formed. Mordenite postdates the heulandite-group zeolites and opal-CT. Some mordenite has replaced the rims of glass shards. The alteration minerals are not related to vertical or lateral zonation, and the irregular distribution of their assemblages is attributed to variations in heat flow, ionic activity in interstitial waters, and permeability. The pyroclastic rocks were in a region of active heat flow during and after their emplacement. The formation of authigenic silicates may have led to the sealing of open spaces and fractures, imposing barriers to permeability and subdividing the original open system into smaller closed systems. As alteration progressed, some of the trapped water in each individual domain was consumed in hydration reactions. Salts could have been concentrated by such a process, and halite probably precipitated from solutions of appropriate composition in the individual closed systems.

A monoclinic IIb-2 clinochlore from the Achmatov mine, Ural Mountains, U.S.S.R., was investigated by neutron diffraction. The formula, based on electron microprobe and wet chemical analyses, is (Mg4.54Al0.97Fe2+ 0.28 Fe3+ 0.18Mn0.01)(Si2.85Al1.15)O10(OH)8. A refinement based on 512 unique reflections converged in space group C2/m to a final R =.066. Cation disorder was found in the two octahedral positions of the 2:1 layer, whereas partial Mg and Al ordering occurs in the interlayer sheet. The two hydroxyl dipoles are roughly perpendicular to the interlayer sheet, forming weak to medium hydrogen bonds with O…O distances of 2.859 and 2.881 Å. The OH-dipole of the 2:1 layer is perpendicular to the (001) plane.

Hornblende of the Carrol Knob mafic complex (southern Blue Ridge Mountains, North Carolina) has weathered under humid, temperate conditions. Hornblende weathering appears to have been a dissolution-reprecipitation reaction, in which hornblende dissolved stoichiometrically, and the ferruginous and aluminous weathering products (goethite, gibbsite, and kaolinite) precipitated from solution (neoformation). During the earliest stage of alteration, ferruginous weathering products formed as linings of fractures within and around crystals and cleavage fragments of hornblende. Side-by-side coalescence of lenticular etch pits during more advanced weathering produced characteristic “denticulated” terminations on hornblende remnants in dissolution cavities bounded by ferruginous boxworks. Dissolution cavities are devoid of weathering products. Small “pendants” of ferruginous material project from the boxwork into void spaces. Because these products are separated from the hornblende remnants by void space, they must have been produced by dissolution-reprecipitation reactions. Complete removal of the parent hornblende left a ferruginous microboxwork or “negative pseudomorph.” Only Al and Fe were conserved over microscopic distances; alkali and alkaline-earth elements were stoichiometrically removed from the weathering microenvironment during the weathering process.

The catalytic power of Ca-nontronite, Ca-bentonite, and Ca-kaolinite in promoting the abiotic ring cleavage of pyrogallol (1,2,3-trihydroxybenzene) and the associated formation of humic polymers was studied in systems free of microbial activity. The presence of Ca-kaolinite and especially Ca-nontronite in the pyrogallol solutions at pH 6.00 greatly enhanced the absorbance at both 472 and 664 nm of the supernatants. At an initial pH of 6.00 and at the end of a 90-hr reaction period, the amounts of CO2 released from the ring cleavage of pyrogallol and the yields of the resultant humic polymers formed in the reaction systems followed the same sequence: Ca-nontronite > Ca-kaolinite > Ca-bentonite. The data indicate that the catalytic power of Fe(III) on the edges and in the structure of nontronite was substantially greater than that of Al on the edges of kaolinite and montmorillonite and of a small amount of Fe(III) in the structure of montmorillonite in promoting the reactions. The infrared and electron spin resonance spectra and the solid-state, cross-polarization magic-angle-spinning 13C nuclear magnetic resonance spectra of humic polymers formed in the reaction systems resembled those of natural humic substances.

X-ray powder diffraction (XRD) and energy-dispersive X-ray analyses (EDX) of individual clay particles from hydrothermal mounds in the Galapagos spreading center (GSC) (Deep Sea Drilling Project, hole 509B) and high-resolution transmission electron microscopy (HRTEM) of the <2-µm size fraction of these sediments were carried out to document the mineralogy, geochemistry, and evolution of their clay horizons. The hydrothermal clay minerals of the GSC mounds were found to be intercalated with pelagic sediments and occurred as irregular interstratified illite/smectite according to X-ray powder diffraction analyses. On the basis of TEM, HRTEM, and EDX data, two types of clays appeared to coexist; these types differed in morphology, potassium content, and mode of stacking sequence. Lath-shaped particles having regular 10-Å, spacings were identified as glauconite, and filmy or veil-like particles, having curly edges and variable 10-13-Å spacings were identified as Fe-smectite (nontronite and Fe-montmorillonite). The absence of lattice fringes between Fe-smectite and glauconite crystallites was observed by HRTEM in clay aggregates. This structural discontinuity between Fe-smectite and glauconite layers suggests that a dissolution-recrystallization mechanism was responsible for the textural and chemical transition from the filmy Fe-smectite to the lath-like glauconite.

Transmission electron microscope (TEM) images of mixed-layer illite/smectite (I/S) from Gulf Coast shales obtained earlier by the authors have been reexamined by comparing them with the calculated images of G. D. Guthrie and D. R. Veblen. Ordered two-layer periodicity was not detected in the 1750- and 2450-m depth samples, for which X-ray powder diffraction (XRD) showed 20% and 40% illite randomly interstratified in I/S, respectively. Two-layer periodicities that occur in images of the 5500-m depth sample were inferred to reflect ordered I/S. XRD data for the same sample imply the presence of 80% illite in RI-ordered I/S. The two-layer periodicities were observed in slightly overfocused images, consistent with the image calculations of Guthrie and Veblen, with strong dark fringes inferred to correspond to smectite interlayers. Two-layer periodicities were observed only in small domains of a few of the images, consistent with the requirement of special orientation of layers, which varies continuously over a wide range. The lack of more frequent observations of ordered periodicities in TEM images may reflect the lack of the special observation conditions and chemical heterogeneity of illite and smectite layers. Ordered mixed-layering may exist in those specimens for which XRD indicates such ordering, in contrast to the previous interpretation of the authors.

The effect of Fe oxidation state on the specific surface area, Sm, of nontronite was studied using the <2-µm, Na+-saturated fraction of the SWa-1 and Garfield nontronite reference clays. The reduction of structural Fe3+ in the octahedral sheet of the nontronite decreased Sm as measured by the adsorption of 2-ethoxyethanol (ethylene glycol-monoethyl ether, EGME). The swellability in water of the nontronite also decreased during reduction. The amount of nonexchangeable Na+, on the other hand, increased with increasing Fe2+ content and was highly correlated with EGME adsorption (r = -.985). The relationship between Sm and Fe2+ was attributed to the collapse of partially or fully expanded layers to unexpanded layers.

Infrared and Mössbauer spectroscopic studies were made on hydrotalcite-like materials, Mg6Al2(OH)16(NO3)2·4H2O, anion exchanged in aqueous solution of K3Fe(CN)6, K4Fe(CN)6·3H2O, or Na2Fe(CN)5NO·2H2O. The material anion-exchanged in aqueous solution of K3Fe(CN)6 gave infrared (IR) absorption bands at 2120 and 2040 cm-1 in the C≡N stretching region, suggesting that part of the ferrate(III) complex was reduced to ferrate(II) complex on the intercalation chiefly because pure K3Fe(III)(CN)6 and K4Fe(II)(CN)6·3H2O gives bands at 2120 and 2040 cm-1, respectively. On the intercalation of Fe(CN)64-, no change in the oxidation state of iron was observed. These features were confirmed by Mössbauer spectroscopy. In the IR spectra of material anion-exchanged in aqueous solution of Na2Fe(CN)5NO·2H2O, the intensity of bands due to N≡O (1940 cm-1) and C≡N stretching was much less than that observed for Na2Fe(CN)5NO·2H2O, indicating that most of N≡O ligand was eliminated during the intercalation. Four bands were observed in the C≡N stretching region: a band at 2143 cm-1 was assigned to C≡N groups in Fe(CN)5NO2-; a band at 2120 cm-1 was tentatively assigned to Fe(CN)5H2O2-; bands at 2040–2050 cm-1 were assigned to Fe(CN)5H2O3-.

The adsorption from chloroform solution of the herbicide diclofop, (RS)-2-(4-(2,4-dichlorophenoxy)phenoxy)propionic acid, and its methyl ester diclofop-methyl on Cu2+-, Al3+-, and Fe3+-exchanged bentonite samples was investigated. For comparison, the complexes formed by diclofop were synthesized and studied. Diclofop adsorbed on the clays and formed carboxylate bonds to the interlayer ions. Diclofop-methyl also adsorbed, but its interaction involved the formation of hydrogen bonds with water molecules in the interlayer. Traces of diclofop were observed in both the solution and the clays after adsorption of diclofop-methyl, indicating that some hydrolysis of the ester to the corresponding acid occurred. Thus, pesticides forming neutral complexes with interlayer cations in montmorillonite in soils may be extractable by solvents and therefore released into the environment.