Simulated drift rates of bromoxynil followed by an in-crop application of metribuzin were applied to processing tomato in eight field studies conducted from 2008 to 2010 in Ridgetown, Ontario, Canada, to determine if a synergistic interaction occurred due to the cumulative herbicide application. A transient synergistic response was observed 7 d after treatment (DAT) when bromoxynil drift rates of 8.5, 17, and 34 g ai ha−1 were followed 3 to 5 d later by metribuzin at 250 g ai ha−1. By 28 DAT, visible injury ratings were additive for 8.5, 17, and 34 g ha−1 bromoxynil followed by metribuzin treatments. However, when bromoxynil at 68 g ha−1 (20% of field rate) was followed by metribuzin, a synergistic interaction was evident and remained through harvest. Based on Colby's equation there was greater visible injury than expected at 7, 14, and 28 DAT when bromoxynil at 68 g ha−1 was followed by metribuzin. A corresponding synergistic reduction of plant dry weight and marketable tomato yield, compared with the nontreated control, was identified. Marketable yields were expected to be 65% of the control according to Colby's equation, but observed yield reductions were 49% when bromoxynil at 68 g ha−1 was followed by metribuzin. In general, tomato plants sprayed with metribuzin after bromoxynil drift had greater injury than treatments sprayed with bromoxynil alone.

Japanese bindweed was found to be one of the most abundant and most difficult-to-control weed species during a 2-yr weed survey in more than 100 winter wheat fields in the North China Plain region. Multivariate data analysis showed that Japanese bindweed is most abundant at sites with comparative low nitrogen (N) fertilization intensities and low crop densities. To gain deeper insights into the biology of Japanese bindweed under various N fertilization intensities, winter wheat seeding rates, herbicide treatments, and their interactions, a 2-yr field experiment was performed. In nonfertilized plots, a herbicide efficacy (based on density reduction) of 22% for 2,4-D, and of 25% for tribenuron-methyl was found. The maximum herbicide efficacy in Nmin-fertilized plots (target N value based on expected crop yield minus soil mineral nitrogen content, ) was 32% for 2,4-D and 34% for tribenuron-methyl. In plots fertilized according to the farmer's practices, a maximum herbicide efficacy of 72% for 2,4-D and of 64% for tribenuron-methyl could be observed. Furthermore, medium and high seeding rates improved the herbicide efficacy by at least 39% for tribenuron-methyl and 44% for 2,4-D compared to the low seeding rate. Winter wheat yield was not significantly affected by seeding rate itself, whereas at low and medium seeding rates, Nmin fertilization was decreasing winter wheat yield significantly compared to the farmer's usual fertilization practice. At the highest seeding rate, Nmin fertilization resulted in equal yields compared to the farmer's practices of fertilization.

A survey questionnaire was sent to cotton consultants of Arkansas and Mississippi through direct mail and Louisiana and Tennessee consultants through on-farm visits in fall of 2011. The survey was returned by a total of 22 Arkansas, 17 Louisiana, 10 Mississippi, and 11 Tennessee cotton consultants, representing 26, 53, 13, and 38% of total cotton planted in these states in 2011, respectively. Collectively, the area planted to glyphosate-resistant (Roundup Ready®, RR) cotton was 97%, glyphosate plus glufosinate-resistant (Widestrike® Flex, WRF) cotton was 30%, and glufosinate-resistant (Liberty Link, LL) cotton was 2.6% of the total cotton surveyed in 2011. Seventy percent of area in all states is still under continuous RR/WRF cotton. Average cost of herbicides in RR systems was $114 ha−1 and in LL systems was $137 ha−1. Across the states, cotton planted under no-tillage, conservation tillage, and conventional tillage was 31, 36, and 33%, respectively, of total scouted cotton. Area under conventional tillage increased and conservation tillage decreased in Arkansas compared with a previous survey conducted in 2006. Palmer amaranth, morningglories, and horseweed in the order of listing were the most problematic weeds of cotton across Arkansas, Mississippi, and Tennessee. In Louisiana, however, morningglories were the most problematic weed followed by Palmer amaranth and common waterhemp. Glyphosate-resistant (GR) Palmer amaranth infested only 13% of scouted cotton area in Louisiana compared with 75% in the remaining three states, and consequently, hand-weeding to control GR Palmer amaranth is practiced on only 2.5% of total scouted area of Louisiana and 49% of the scouted area of the remaining three states. Hand-weeding added an additional $12 to 371 ha−1 to weed-management costs. One-half (50%) of the cotton consultants emphasized the need for more research on residual herbicides that can control GR Palmer amaranth effectively.

In fall 2011, cotton and soybean consultants from Arkansas, Louisiana, Mississippi, and Tennessee were surveyed through direct mail and on-farm visits, and rice consultants from Arkansas and Mississippi were surveyed through direct mail to assess the importance and level of implementation of herbicide resistance best management practices (HR-BMPs) for herbicide-resistant weeds. Proper herbicide timing, clean start with no weeds at planting, application of multiple effective herbicide modes of action, use of full labeled herbicide rates, and prevention of crop weed seed production with importance rating of ≥ 4.6 out of 5.0 were perceived as the most important HR-BMPs in all crops. Purchase of certified rice seed was on 90% of scouted hectares. In contrast, least important HR-BMPs as perceived by consultants with importance ratings of ≤ 4.0 in cotton, ≤ 3.7 in rice, and ≤ 3.8 in soybean were cultural practices such as manual removal of weeds; tillage including disking, cultivation, or deep tillage; narrow (≤ 50 cm)-row crops, cover crops, and altered planting dates. Narrow crop rows and cover crops in cotton; altered planting dates in cotton and soybean; and cleaning of farm equipment and manual weeding in rice and soybean is currently employed on ≤ 20% of scouted hectares. Extra costs, time constraints, adverse weather conditions, lack of labor and equipment, profitability, herbicide-related concerns, and complacency were perceived as key obstacles for adoption of most HR-BMPs. With limited adoption of most cultural practices that reduce risks of herbicide-resistant weeds, there are opportunities to educate growers concerning the proactive need and long-term benefits of adopting HR-BMPs to ensure sustainable weed management and profitable crop production.

Greenhouse experiments were conducted in 2011 to evaluate the effect of mowing frequency and mowing height on four summer annual weed species (large crabgrass, barnyardgrass, giant ragweed, and common lambsquarters). Plants were clipped at three heights (5, 10, or 20 cm) and at two frequencies (single clipping or repeated clippings at the same height) to simulate mowing. A nonclipped control was also grown for each species. When clipped once, large crabgrass, barnyardgrass, and giant ragweed produced at least 90% of the total dry weight (DW) of the nonclipped plants, and common lambsquarters produced at least 75%. A single cut was generally not sufficient to prevent weed seed production or kill any of the weeds in this study. Repeated clipping reduced large crabgrass, giant ragweed, and common lambsquarters reproductive DW to 46, 27, and 10% respectively, of the nonclipped control. Barnyardgrass plants that were repeatedly clipped produced between 0 and 8% of the seed DW of nonclipped plants, depending on clipping height. Repeated clipping reduced weed total DW to below 40% for all species compared to nonclipped plants. Our results suggest that, unless combined with other weed management practices, repeated mowing may be necessary to limit the growth and seed production of these weed species.

Applications of aminocyclopyrachlor in 2011 to turf resulted in brown and twisted shoots, leaves, and needles; shoot dieback; and in some cases, death of trees and ornamental plants adjacent to treated turf areas. Our research objective was to determine if a sensitive plant could be injured from wood chips (mulch) obtained from aminocyclopyrachlor-damaged trees, and to quantify movement of aminocyclopyrachlor from contaminated wood chips into soil and its subsequent uptake by roots into landscape plant tissues. Tomatoes were grown under greenhouse conditions and mulched with chipped tree branches collected from honey locust and Norway spruce damaged 12 mo previously by aminocyclopyrachlor. Analysis of tomato tissue for aminocyclopyrachlor residues 32 d after mulching found aminocyclopyrachlor in all mulched tomato plants, which was consistent with observations of epinasty on tomato leaflets. Aminocyclopyrachlor residues ranged from 0.5 to 8.0 ppb in tomato plants while chipped tree branches contained 1.7 to 14.7 ppb. Aminocyclopyrachlor residues in the potting soil below the mulch ranged from below the quantifiable limit to 0.63 ppb, indicating that aminocyclopyrachlor can leach from wood chips into soil, causing plant injury. These results indicate that trees damaged by aminocyclopyrachlor should not be chipped and used for mulch or as an ingredient in compost.