Skip to main content Accessibility help

Multi-port power converter for segmented PEM fuel cell in transport application: Simulation with fault-tolerant strategy

  • A. De Bernardinis (a1), E. Frappé (a1), O. Béthoux (a2), C. Marchand (a2) and G. Coquery (a1)...


To fulfill the transport applications, either for traction or on-board auxiliaries systems, a power generator based on fuel cell needs significant power. For this purpose, long fuel cell stacks, either mono- or multi-stack systems, are already implemented as technological solutions. Long stacks though may be affected by spatial discrepancies (fluidics, temperature) causing possible failures. The latter often occur on localized stack sections. A corrective action has to be taken to quickly restore the fuel cell’s state of health. As an alternative to fluidic action, segmented electric action is explored in this paper. First, an “All or Nothing” solution achieved with electrical by-pass circuits is analyzed: it proved simple to implement but restrictive to exploit. Consequently, a “gradual” action is proposed by using the power electronics converter associated to the fuel cell. Hence, the present work investigates the approach consisting in individually driving the electric power delivered by each segment of a long polymer electrolyte membrane fuel cell stack. Each segment is controlled independently according to its state of health. To achieve this objective, the article provides an extended multi-criteria analysis of several power converter topologies. The converter topology has to be in agreement with transportation specifications: simple, compact, having a high efficiency and should be adapted to manage fuel cell degraded modes. Among several studied topologies, resonant isolated boost stands out as a candidate topology. The related multi-port architecture and algorithm structure are analyzed by numerical simulations, taking into account degraded modes and technology considerations.


Corresponding author


Hide All
[1]World Energy Outlook 2008, OECD/IEA (IEA Publications, Paris, 2008)
[2]Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the Energy Performance Of Buildings (recast), Publication of the Official Journal of the European Union, 18 June 2010, L 153/13
[3]Regulation (EC) No. 715/2007 of the European Parliament and of the Council of 20 June 2007 on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, Publication of the Official Journal of the European Union, 29 June 2007, L 171/1
[4]Sekizawa, K., Kitamura, N., Manabe, K., Nonobe, Y., Kizaki, M., Kojima, K., ECS Trans. 33, 1947(2010)
[5]Lin, P., Zhou, P., Wu, C.W., J. Power Sources 194, 381(2009)
[6]Corbo, P., Migliardini, F., Veneri, O., Int. J. Hydrogen Energy 32, 4340 (2007)
[7]Candusso, D., Harel, F., De Bernardinis, A., Francois, X., Péra, M.-C., Hissel, D., Schott, P., Coquery, G., Kauffmann, J.-M., Int. J. Hydrogen Energy 31, 1019 (2006)
[8]De Bernardinis, A., Harel, F., Girardot, L., Candusso, D., Hissel, D., François, X., Coquery, G., Besse, S., Experimental Dynamic Performance of a 30 kW 90 Cell PEFC Stack under Transportation Load Cycle Constraints, in EFCF 2009, Lucerne, Switzerland, 2009, pp. 116
[9]Knights, S., J. Power Sources 127, 127 (2004)
[10]Yousfi-Steiner, N., Moçotéguy, P., Candusso, D., Hissel, D., Hernandez, A., Aslanides, A., J. Power Sources 183, 260 (2008)
[11]Li, H., Tang, Y., Wang, Z., Shi, Z., Wu, S., Song, D., Zhang, J., Fatih, K., Zhang, J., Wang, H., Liu, Z., Abouatallah, R., Mazza, A., J. Power Sources 178, 103 (2008)
[12]Park, Y., Caton, J., J. Power Sources 179, 584 (2008)
[13]Wahdame, B., Candusso, D., Harel, F., François, X., Péra, M.-C., Hissel, D., Kauffmann, J.-M., J. Power Sources 182, 429 (2008)
[14]Ramousse, J., Adzakpa, K.P., Dubé, Y., Agbossou, K., Fournier, M., Poulin, A., Dostie, M., J. Fuel Cell Sci. Technol. 7, 041006 (2010)
[15]Frappé, E., De Bernardinis, A., Bethoux, O., Candusso, D., Harel, F., Marchand, C., Coquery, G., Eur. Phys. J. Appl. Phys. 54, 23412 (2011)
[16]Owejan, J.P., Trabold, T.A., Jacobson, D.L., Baker, D.R., Hussey, D.S., Arif, M., Int. J. Heat Mass Trans. 49, 4721 (2006)
[17]Fouquet, N., Doulet, C., Nouillant, C., Dauphin-Tanguy, G., Ould-Bouamama, B., J. Power Sources 159, 905(2006)
[18]Mulder, G., Deridder, F., Coenen, P., Weyen, D., Martens, A., Int. J. Hydrogen Energy 33, 5728 (2008)
[19]Hernandez, A., Outbib, R., Hissel, D., J. Eur. Automated Syst. 42, 1225 (2008)
[20]Fontes, G., Turpin, C., Astier, S., A large signal dynamic circuit model of a H2/O2 PEM fuel cell: description, parameter identification and exploitation, in Proc. of FDFC 2008, Nancy, France, 2008
[21]Jang, J., Chiu, H., Yan, W., Sun, W., J. Power Sources 180, 476(2008)
[22]Hinaje, M., Sadli, I., Martin, J.-P., Thounthong, P., Raël, S., Davat, B., Int. J. Hydrogen Energy 34, 2718 (2009)
[23]Poirot-Crouvezier, J.-P., Roy, F., GENEPAC Project: Realization of a fuel cell stack prototype dedicated to the automotive application, in WHEC, Lyon, France, 2006 pp. 15
[24]Guillet, N., Didierjean, S., Chenu, A., Bonnet, C., Carré, P., Wahdame, B., Dumercy, L., François, X., Girardot, L., Harel, F., Hissel, D., Besse, S., Boblet, S., Chaudron, V., De Bernardinis, A., Coquery, G., Escribano, S., Bardi, N., Scientific and Technological Progress Toward the Development of an 80kWe PEM Fuel Cell System for Transport Applications, in EVS’07 23rd Electrical Vehicles Symposium, Anaheim, CA, USA, 2007
[25]Bonnet, C., Didierjean, S., Guillet, N., Besse, S., Colinart, T., Carré, P., J. Power Sources 182, 441 (2008)
[26]Miller, M., Bazylak, A., J. Power Sources 196, 601 (2011)
[27]De Bernardinis, A., Péra, M.-C., Garnier, J., Hissel, D., Coquery, G., Kauffmann, J.-M., Energy Convers. Manage. 49, 2367 (2008)
[28]Lee, W.-K., Ho, C.-H., Van Zee, J.W., Murthy, M., J. Power Sources 84, 45 (1999)
[29]Hwang, J.J., Chang, W.R., Weng, F.B., Su, A., Chen, C.K., Int. J. Hydrogen Energy 33, 3801 (2008)
[30]Montanini, R., Squadrito, G., Giacoppo, G., Experimental evaluation of the clamping pressure distribution in a PEM fuel cell using matrix-based piezoresistive thin-film sensors, in XIX IMEKO World Congress Fundamental and Applied Metrology, Lisbon, 2009
[31]Strasser, K., in Handbook of fuel cells , edited by Vielstich, W., Lamm, A., Gasteiger, H.A., vol. 4 (John Wiley & Sons, Chichester, UK, 2003) , pp. 12021214
[32]Schulte, J., System and method for bypassing failed stacks in a multiple stack fuel cell. US Patent App. 20060127710. Published on 15 June 2006
[33]Ronne, J., Mihai, R.C., Shi, M., Fault management in a fuel cell-based system. US Patent App. 7862947B2. Published on 4 January 2011
[34]Candusso, D., De Bernardinis, A., Péra, M.-C., Harel, F., François, X., Hissel, D., Coquery, G., Kauffmann, J.-M., Energy Convers. Manage. 49, 880 (2008)
[35]De Bernardinis, A., Candusso, D., Harel, F., François, X., Coquery, G., Energy Convers. Manage. 51, 1044 (2010)
[36]Taniguchi, A., Akita, T., Yasuda, K., Miyazaki, Y., J. Power Sources 130, 42 (2004)
[37]Taniguchi, A., Akita, T., Yasuda, K., Miyazaki, Y., Int. J. Hydrogen Energy 33, 2323 (2008)
[38]Gerard, M., Poirot-Crouvezier, J.-P., Hissel, D., Péra, M.-C., Int. J. Hydrogen Energy 35, 12295 (2010)
[39]De Bernardinis, A., Candusso, D., Harel, F., Coquery, G., Power Electronics Interface for an Hybrid PEMFC Generating System with Fault Management Strategies for Transportation, in Proc. EPE 2009, Barcelona, Spain, 2009
[40]Tao, H., Kotsopoulos, A., Duarte, J.L., Hendrix, M.A.M., IEEE Trans. Power Electron. 23, 771 (2008)
[41]Wang, L., Collins, E.G., Li, H., IEEE Trans. Veh. Technol. 60, 1419 (2011)
[42]De Doncker, R.W.A.A., Divan, D.M., Kheraluwala, M.H., IEEE Trans. Ind. Appl. 27, 63 (1991)
[43]Kheraluwala, M.H., Gascoigne, R.W., Divan, D.M., Baumann, E.D., IEEE Trans. Ind. Appl. 28, 1294 (1992)
[44]Bai, H., Mi, C., IEEE Trans. Power Electron. 23, 2905 (2008)
[45]Krismer, F., Round, S., Kolar, J.W., Performance optimization of a high current dual active bridge with a wide operating voltage range, in Proc. Power Electronics Specialists Conf., PESC’06, 2006
[46]Mariethoz, S., Rufer, A., Multisource DC-DC converter for the supply of hybrid multilevel converter, in Conference Record of the 2006 IEEE Industry Applications Conf., 41st IAS Annual Meeting, vol. 2, Tampa, FL, USA, 2006, pp. 982987
[47]Zhao, C., Round, S.D., Kolar, J.W., IEEE Trans. Power Electron. 23, 2443 (2008)
[48]Frappé, E., De Bernardinis, A., Bethoux, O., Marchand, C., Coquery, G., A Soft-Switching Multisource DC-DC Converter for Segmented PEM Fuel Cell Power Management in Vehicle Application, in IEEE Vehicle Power and Propulsion Conf., Chicago, IL, USA, 2011
[49]Rallieres, O., Mulot, J., Hissel, D., Turpin, C., Harel, F., Péra, M.-C., Fontes, G., Astier, S., Impact des ondulations de courant générées par un convertisseur DC-DC boost sur une pile à combustible PEM, in Proc. of Electrotechnique du Futur 2011, Belfort, France, 2011 [in French]
[50]Croulard, V., Baptiste, G.-W., Durville, A., Double resonance electronic converter, US Patent Application Publication, US 2003/0231514A1, Publication date: 18 December 2003
[51]Zainea, M., Godoy, E., Cormerais, H., Buisson, J., Guéguen, H., A double resonance generator simulation using a hybrid approach, in Proc. EPE 2005 Conf., Dresden, Germany, 2005
[52]De Bernardinis, A., Butterbach, S., Lallemand, R., Jeunesse, A., Coquery, G., Aubin, P., Double resonant converter topology with fast switching semiconductors for lead-acid battery charger used in hybrid electric locomotive, IEEE Int. Symp. on Industrial Electronics, Gdańsk, Poland, 2011, pp. 239244
[53]Lembeye, Y., Bang, V.D., Lefevre, G., Ferrieux, J.-P., IEEE Trans. Energy Convers. 24, 203 (2009)
[54]Nymand, M., Andersen, M.A.E., IEEE Trans. Ind. Electron. 57, 505 (2010)
[55]Vazquez, A., Aguilar, C., Canales, F., Ponce, M., Integrated power conditioner topology for fuel cell based power supply systems, in Proc. of IEEE PESC’08, 2008, pp. 223229
[56]Wang, K., Lin, C.Y., Zhu, L., Qu, D., Lee, F.C., Lai, J.S., Bi-directional DC to DC converters for fuel cell systems, in Power Electronics in Transportation, Dearborn, USA, 1998, pp. 4751
[57]Benqassmi, H., Ferrieux, J.-P., Barbaroux, J., Current-source resonant converter in power factor correction, in Proc. PESC’97. IEEE Power Electronics Specialists Conf., 1997, pp. 378384
[58]Chen, J.-F., Chen, R.-Y., Liang, T.-J., IEEE Trans. Power Electron. 23, 379 (2008)
[59]Chen, R.-Y., Liang, T.-J., Chen, J.-F., Lin, R.-L., Tseng, K.-C., IEEE Trans. Ind. Appl. 44, 1218 (2008)
[60]Špánik, P., Feňo, I., Kácsor, G., Lokšeninec, I., Adv. Electr. Electron. Eng. Consulted online 10 February 2012 at
[61]Tech. Datasheet IXFN230N20T, IXYS Corp., DS100134A (06/11)


Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed