Hostname: page-component-7479d7b7d-767nl Total loading time: 0 Render date: 2024-07-11T05:18:44.498Z Has data issue: false hasContentIssue false

Fault tolerant multiphase electrical drives: the impact of design*

Published online by Cambridge University Press:  30 April 2008

E. Semail
Affiliation:
L2EP ENSAM, 8 boulevard Louis XIV, 59046 Lille, France
X. Kestelyn*
Affiliation:
L2EP ENSAM, 8 boulevard Louis XIV, 59046 Lille, France
F. Locment
Affiliation:
L2EP ENSAM, 8 boulevard Louis XIV, 59046 Lille, France

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

This paper deals with fault tolerant multiphase electrical drives. The quality of the torque of a vector-controlled Permanent Magnet (PM) Synchronous Machine supplied by a multi-leg Voltage Source Inverter (VSI) is examined in normal operation and when one or two phases are open-circuited. It is then deduced that a seven-phase machine is a good compromise allowing high torque-to-volume density and easy control with smooth torque in fault operation. Experimental results confirm the predicted characteristics.

Keywords

Type
Research Article
Copyright
© EDP Sciences, 2008

Footnotes

*

This article has been submitted as part of “IET – Colloquium on Reliability in Electromagnetic Systems”, 24 and 25 May 2007, Paris

References

Welchko, B.A., Lipo, A., Jahns, T.M., Schulz, S.E., IEEE Trans. Power Electron. 19, 1108 (2004) CrossRef
B. Keith, I. Ramesohl, S. Reck, H. Schwab, G. Sturtzer, Proc. of EPE'03, CD-ROM, Toulouse (France), September 2003
Mecrow, B.C., Jack, A.G., Haylock, J.A., Coles, J., IEE Proc-Electr. Power Appl. 143, 437 (1996) CrossRef
J. Figueroa, J. Cros, P. Viarouge, CD-ROM, Toulouse (France), September 2003
B.C. Mecrow, A.G. Jack, D.J. Atkinson, S. Green, G.J. Atkinson, Design and Testing of a 4 Phase Fault Tolerant Permanent Magnet Machine for an Engine Fuel Pump, IEEE-IEMDC'03, CD-ROM, Madison (USA), June 2003
A. Krautstrunk, P. Mutschler, IFAC-Conference on Mechatronic Systems 1, 45 (2000)
A. Lindemann, Power Electronic Supply of Automotive Starter Generator, Power Electronics Europe, issue 4, 2001
Liu, J., Hu, J., Xu, L., Proc. IEEE-IAS'04 4, 2754 (2004)
Gopalarathnam, T., Toliyat, H.A., Moreira, J.C., Proc. IEEE-IAS'00 3, 1683 (2000)
Ryu, H.M., J.H. kim, S.K. sul, IEEE Trans. Ind. Appl. 42, 1062 (2006)
Parsa, L., Toliyat, H.A., Proc. IEEE-IAS'04 2, 1048 (2004)
Ryu, H.M., Kim, J.H., Sul, S.K., IEEE Trans. Ind. Appl. 42, 1062 (2006)
E. Robert-Dehault, M.F. Benkhoris, E. Semail, Study of a 5-phases synchronous machine fed by PWM inverters under fault conditions, Proc. of ICEM2002, CD-ROM, Brugge (Belgium), August 2002
Locment, F., Semail, E., Piriou, F., IEEE Trans. Magn. 42, 1427 (2006) CrossRef
F. Locment, E. Semail, F. Piriou, Soft Magnetic Composite Axial Flux Seven-Phase Machine, Proc. of ICEM'06, CD-ROM, Chania, (Greece), Sept. 2006
Semail, E., Bouscayrol, A., Hautier, J.P., Eur. Phys. J. Appl. Phys. 22, 207 (2003) CrossRef
Semail, E., Kestelyn, X., Bouscayrol, A., Proc. of IEEE-IAS'04 1, 71 (2004)
F. Locment, E. Semail, X. Kestelyn, A. Bouscayrol, Control of a seven-phase axial flux machine designed for fault operation, Proc. of IECON'06, Paris (France), November 2006
F. Scuiller, J.F. Charpentier, E. Semail, S. Clénet, A global design strategy for multiphase machine applied to the design of a 7-phase fractional slot concentrated winding PM machine, Proc. of ICEM'06, CD-ROM, Chania, (Greece), September 2006
Scuiller, F., Semail, E., Charpentier, J.F., Clénet, S., IASME Trans. 1, 365 (2004)
J.R. Hendershot Jr, T.J.E. Miller, Magna Physics Publication, Oxford Science Publication.