Editors
Mario Štorga, University of Zagreb FSB, Croatia
Stanko Škec, University of Zagreb FSB, Croatia
Tomislav Martinec, University of Zagreb FSB, Croatia
Dorian Marjanović, University of Zagreb FSB, Croatia
Neven Pavković, University of Zagreb FSB, Croatia
Marija Majda Škec, University of Zagreb FSB, Croatia
Programme Committee
P. John Clarkson, University of Cambridge, United Kingdom
Tim C. McAloone, Technical University of Denmark, Denmark
Julie Stal-Le Cardinal, CentraleSupélec, France
Sandro Wartzack, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Stanko Škec, University of Zagreb FSB, Croatia
Mario Štorga, University of Zagreb FSB, Croatia
Scientific Advisory Board
Abi Akle, Audrey, ESTIA, France
Acharya, Shakuntala, Indian Institute of Technology Guwahati, India
Ahumada-Tello, Eduardo, Autonomous University of Baja California, Mexico
Ali, Wafa, Indus Valley School of Art & Architecture, Pakistan
Allais, Romain, APESA, France
Almefelt, Lars, Chalmers University of Technology, Sweden
Ammersdörfer, Theresa, Technische Universität Clausthal, Germany
Aoussat, Améziane, Arts et Métiers ParisTech, France
Arlitt, Ryan Michael, Denmark
Arrouf, Abdelmalek, LEMPAU, Batna1 University, Algeria
Attia, Amir Ibrahem, California State University, Monterey Bay, United States of America
Aurisicchio, Marco, Imperial College London, United Kingdom
Bartz, Marcel, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Basan, Robert, University of Rijeka, Faculty of Engineering, Croatia
Baxter, Weston, Imperial College London, United Kingdom
Becattini, Niccolo, Politecnico di Milano, Italy
Behdinan, Kamran, University of Toronto, Canada
Bencetic, Sanja, University of Zagreb Faculty of Architecture, School of Design, Croatia
Bender, Beate, Ruhr-Universität Bochum, Germany
Benjamin, Stacy, Northwestern University, United States of America
Bergsjö, Dag, Chalmers University of Technology, Sweden
Bertoni, Alessandro, Blekinge Institute of Technology, Sweden
Bertoni, Marco, Blekinge Institute of Technology, Sweden
Blandino, Graziana, Politecnico di Torino, Italy
Boahen, Samuel, Kwame Nkrumah University of Science and Technology, Ghana
Bojčetić, Nenad, University of Zagreb FSB, Croatia
Bonjour, Eric, Université de Lorraine, France
Bordegoni, Monica, Politecnico di Milano, Italy
Borg, Jonathan, University of Malta, Malta
Borgianni, Yuri, Free University of Bozen|Bolzano, Italy
Boujut, Jean-Francois, Univ. Grenoble Alpes, CNRS, Grenoble INP, G-SCOP, France
Bouwhuis, Dominic G., Eindhoven University of Technology, The Netherlands
Brahma, Arindam, Chalmers University of Technology, Sweden
Brisco, Ross, University of Strathclyde, United Kingdom
Bursac, Nikola, Hamburg University of Technology, Germany
Bylund, Nicklas, United States of America
Cagan, Jonathan, Carnegie Mellon University, United States of America
Caldwell, Nicholas, University of Suffolk, United Kingdom
Calvo, Rafael A., Imperial College London, United Kingdom
Campean, Felician, University of Bradford, United Kingdom
Cantamessa, Marco, Politecnico di Torino, Italy
Carulli, Marina, Politecnico di Milano, Italy
Caruso, Giandomenico, Politecnico di Milano, Italy
Casakin, Hernan, Ariel University, Israel
Cascini, Gaetano, Politecnico di Milano, Italy
Cash, Philip, Northumbria University, United Kingdom
Chamberlain, Paul, Sheffield Hallam University, United Kingdom
Chantzaras, Christos, Technical University of Munich, Germany
Chen, Liuqing, Zhejiang University, China
Chiarello, Filippo, University of Pisa, Italy
Childs, Peter R. N., Imperial College London, United Kingdom
Choi, Christina Youngmi, Royal College of Art, United Kingdom
Chong, Leah, Massachusetts Institute of Technology, United States of America
Chulvi, Vicente, Universitat Jaume I, Spain
Ciliotta Chehade, Estefania, Northeastern University, United States of America
Clarkson, P. John, University of Cambridge, United Kingdom
Cluzel, François, Laboratoire Genie Industriel, CentraleSupélec, Université Paris-Saclay, France
Colombo, Samuele, Politecnico di Torino, Italy
Conrad, Franziska, University of Southampton, United Kingdom
Conrad, Jan, Hochschule Kaiserslautern University of Applied Sciences, Germany
Coskun, Aykut, Koç University, Turkiye
Coutellier, Daniel, INSA Hauts-de-France, France
D'Amico, Enrique, National University of La Plata, Argentina
Deininger, Michael, Technical University of Denmark, Denmark
Dekoninck, Elies Ann, University of Bath, United Kingdom
Del Curto, Barbara, Politecnico di Milano, Italy
Del Giorgio Solfa, Federico, National University of La Plata, Argentina
Demke, Niels, Helmut-Schmidt-Universität/Universität der Bundeswehr Hamburg, Germany
Eckert, Claudia, The Open University, United Kingdom
Ehlers, Tobias, Gottfried Wilhelm Leibniz Universität Hannover, Germany
Eifler, Tobias, Technical University of Denmark, Denmark
Eisenbart, Boris, Swinburne University of Technology, Australia
Ellman, Asko Uolevi, Tampere University, Finland
Eneberg, Magnus, KTH Royal Institute of Technology, Sweden
Eppinger, Steven, Massachusetts Institute of Technology, United States of America
Erbe, Torsten, ASML BV, The Netherlands
Erden, Zuhal, Atilim University, Turkiye
Ericson, Åsa, Luleå University of Technology, Sweden
Eriksson, Yvonne, Mälardalen University, Sweden
Eynard, Benoit, Université de Technologie de Compiègne, France
Fain, Nuša, Carleton University, Canada
Fantoni, Gualtiero, University of Pisa, Italy
Fargnoli, Mario, Universitas Mercatorum, Italy
Farrugia, Philip, University of Malta, Malta
Favi, Claudio, Università degli studi di Parma, Italy
Fazelpour, Mohammad, University of Maryland, United States of America
Ferrise, Francesco, Politecnico di Milano, Italy
Fillingim, Kenton Blane, Oak Ridge National Laboratory, United States of America
Finger - CMU, Susan, Carnegie Mellon University, United States of America
Fiorineschi, Lorenzo, University of Florence, Italy
Fischer, Xavier, ESTIA, France
Formentini, Giovanni, Aarhus University, Denmark
Forte, Sven, CONTACT Software, Germany
Fortin, Clement, Skolkovo Institute of Science and Technology, Russia
Fujita, Kikuo, Osaka University, Japan
Gaha, Raoudha, Université de Technologie de Compiègne, France
Gembarski, Paul Christoph, Leibniz Universität Hannover, Germany
Georgiev, Georgi V., Center for Ubiquitous Computing, University of Oulu, Finland
Gerhard, Detlef, Ruhr-Universität Bochum, Germany
Gero, John, UNC Charlotte, United States of America
Göbel, Jens Christian, University of Kaiserslautern-Landau, Germany
Goker, Mehmet, United States of America
Gomes, Giovana Monteiro, Technical University of Denmark, Denmark
Gonçalves, Milene, Delft University of Technology, The Netherlands
Gooch, Shayne, University of Canterbury, New Zealand
Gopsill, James, University of Bristol, United Kingdom
Götz, Stefan, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Goucher-Lambert, Kosa, University of California, Berkeley, United States of America
Goudswaard, Mark, University of Bristol, United Kingdom
Grafinger, Manfred, TU Wien, Austria
Graziosi, Serena, Politecnico di Milano, Italy
Grierson, Hilary, University of Strathclyde, United Kingdom
Guagliano, Mario, Politecnico di Milano, Italy
Guertler, Matthias R., University of Technology Sydney, Australia
Gunn, Wendy, Aalborg University, Denmark
Gupta, Ravi Kumar, National Institute of Technical Teachers Training Bhopal, India
Hackenberg, Georg, University of Applied Sciences Upper Austria, Austria
Hashemi Farzaneh, Helena, MTU Aero Engines, Germany
Hassannezhad, Mohammad, Queen Mary University of London, United Kingdom
Hatchuel, Armand, MINES ParisTech, France
Hehenberger, Peter, University of Applied Sciences Upper Austria, Austria
Hicks, Ben, University of Bristol, United Kingdom
Hirz, Mario, Graz University of Technology, Austria
Holder, Daniel, University of Stuttgart, Germany
Horvat, Nikola, University of Zagreb FSB, Croatia
Howard, Thomas J., Technical University of Denmark, Denmark
Howell, Bryan, Brigham Young University, United States of America
Huang, Tao, East Tennessee State University, United States of America
Hurst, Ada, University of Waterloo, Canada
Husung, Stephan, Technische Universität Ilmenau, Germany
I. Hallstedt, Sophie, Chalmers University of Technology, Sweden
Iijima, Junichi, Tokyo University of Science, Japan
Ilies, Horea, University of Connecticut, United States of America
Inkermann, David, Technische Universität Clausthal, Germany
Ioannou Kazamia, Kika, University of Nicosia, Cyprus
Ion, William, University of Strathclyde, United Kingdom
Isaksson, Ola, Chalmers University of Technology, Sweden
Jagtap, Santosh, Indian Institute of Technology Guwahati, India
Janković, Marija, CentraleSupélec, France
Jean, Camille, Arts et Métiers ParisTech, France
Johansson, Glenn, Lund University, Sweden
Johansson Askling, Christian, Blekinge Institute of Technology, Sweden
Jowers, Iestyn, The Open University, United Kingdom
Jung, Eui Chul, Seoul National University, South Korea
Jurčević Lulić, Tanja, University of Zagreb FSB, Croatia
Juuti, Tero Sakari, Tampere University, Finland
Kattwinkel, Daniela, Ruhr-Universität Bochum, Germany
Keates, Simeon, University of Chichester, United Kingdom
Keiding, Villads, Technical University of Denmark, Denmark
Keldmann, Troels, Keldmann Healthcare A/S, Denmark
Keshwani, Sonal, Indraprastha Institute of Information Technology, Delhi, India
Khan, Mohammed Rajik, National Institute of Technology Rourkela, India
Kiessling, Jonathan Max, University of Stuttgart, Germany
Kim, Harrison, University of Illinois Urbana-Champaign, United States of America
Kim, Yong Se, University of Turku, Finland
Koch, Alexander, Bundeswehr University Munich, Germany
Koh, Edwin, Singapore University of Technology and Design, Singapore
Köhler, Christian, htw saar - University of Applied Sciences, Germany
Kokkolaras, Michael, McGill University, Canada
Komashie, Alexander, University of Cambridge, United Kingdom
Komoto, Hitoshi, National Institute of Advanced Industrial Science and Technology (AIST), Japan
Koronis, Georgios, University of the Aegean, Greece
Kota, Srinivas, Birla Institute of Technology and Science, Pilani, India
Kovacevic, Ahmed, City, University of London, United Kingdom
Krause, Dieter, Hamburg University of Technology, Germany
Krauss, Gordon, Harvey Mudd College, United States of America
Kreimeyer, Matthias, University of Stuttgart, Germany
Krus, Petter, Linköping University, Sweden
Kwak, Minjung, Soongsil University, South Korea
Lamé, Guillaume, CentraleSupélec, France
Lee, Boyeun, University of Exeter Business School, United Kingdom
Legaard, Jesper Falck, Design School Kolding, Denmark
Legardeur, Jeremy, University of Bordeaux, ESTIA Institute of Technology, France
Leroy, Yann, CentraleSupélec, France
Li, Jamy, Toronto Metropolitan University, Canada
Liao, Ting, Stevens Institute of Technology, United States of America
Lindahl, Mattias, Linköping University, Sweden
Liu, Ying, Cardiff University, United Kingdom
Liu, Yuan, Beijing Institute of Fashion Technology, China
Livotov, Pavel, Offenburg University of Applied Sciences, Germany
López Forniés, Ignacio, Universidad de Zaragoza, Spain
Lugnet, Johan, Luleå University of Technology, Sweden
Luo, Jianxi, Singapore University of Technology and Design, Singapore
Mahdjoub, Morad, Université de Technologie de Belfort-Montbéliard, France
Maier, Anja, University of Strathclyde, United Kingdom
Malmqvist, Johan, Chalmers University of Technology, Sweden
Mandolini, Marco, Università Politecnica delle Marche, Italy
Maranzana, Nicolas, Arts et Métiers ParisTech, France
Marcocchia, Giulia, CY école de design, France
Marconi, Marco, Università degli Studi della Tuscia, Italy
Marini, Michele, Technical University of Denmark, Denmark
Marjanović, Dorian, University of Zagreb FSB, Croatia
Martinec, Tomislav, University of Zagreb FSB, Croatia
Marxt, Christian, ETH Zurich, Switzerland
Masclet, Cédric, Univ. Grenoble Alpes, CNRS, Grenoble INP, G-SCOP, France
Maselli, Vincenzo, Sapienza Università di Roma, Italy
Matsumae, Akane, Kyushu University, Japan
Matthews, Jason Anthony, University of the West of England, United Kingdom
Maurya, Santosh Kumar, Hitachi, Ltd., Japan
McAloone, Tim, Technical University of Denmark, Denmark
McKay, Alison, University of Leeds, United Kingdom
Menshenin, Yaroslav, Université Grenoble Alpes, Grenoble INP, France
Merlo, Christophe, ESTIA, France
Miehling, Jörg, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Milčić, Diana, University of Zagreb Faculty of Graphic Arts, Croatia
Millet, Dominique, SeaTech, Ecole d'ingénieurs - Université de Toulon, France
Moehringer, Stefan, Simon Moehringer Anlagenbau GmbH, Germany
Moghaddam, Mohsen, Northeastern University, United States of America
Montagna, Francesca, Politecnico di Torino, Italy
Moon, Seung Ki, Nanyang Technological University, Singapore
Morosi, Federico, Politecnico di Milano, Italy
Mörtl, Markus, Technical University of Munich, Germany
Motte, Damien, Lund University, Sweden
Mougaard, Krestine, Technical University of Denmark, Denmark
Murakami, Tamotsu, University of Tokyo, Japan
Ndiaye, Yakhoub, Singapore University of Technology and Design, Singapore
Nespoli, Oscar, University of Waterloo, Canada
Nicolas Perry, Nicolas, Arts et Métiers ParisTech, France
Nielsen, Brita Fladvad, Norwegian University of Science and Technology, Norway
Nizamis, Kostas, University of Twente, The Netherlands
Nomaguchi, Yutaka, Osaka University, Japan
Nordin, Axel, Lund University, Sweden
Oehmen, Josef, Technical University of Denmark, Denmark
Oh, David C., North Carolina State University, United States of America
Öhrwall Rönnbäck, Anna, Luleå University of Technology, Sweden
Ölvander, Johan, Linköping University, Sweden
Onkar, Prasad, Indian Institute of Technology Hyderabad, India
Otsuka, Akimasa, Sanyo-Onoda City University, Japan
Paetzold-Byhain, Kristin, Technische Universität Dresden, Germany
Panarotto, Massimo, Chalmers University of Technology, Sweden
Papalambros, Panos Y., University of Michigan, United States of America
Papantonopoulos, Sotiris, Democritus University of Thrace, Greece
Pavković, Neven, University of Zagreb FSB, Croatia
Peters, Diane, Kettering University, United States of America
Petiot, Jean-François, École Centrale de Nantes, France
Pigosso, Daniela C. A., Technical University of Denmark, Denmark
Pinquié, Romain, Univ. Grenoble Alpes, CNRS, Grenoble INP, G-SCOP, France
Plaumann, Benedikt, Hamburg University of Applied Sciences, Germany
Pradel, Patrick, Loughborough University, United Kingdom
Prakash, Raghu Vasu, Indian Institute of Technology Madras, India
Pulm, Udo, Hamburg University of Applied Sciences, Germany
Purwaningrum, Lu'lu’, Universitas Sebelas Maret, Indonesia
Quattelbaum, Bastian, Hochschule Niederrhein University of Applied Sciences, Germany
Qureshi, Ahmed, University of Alberta, Canada
Ranscombe, Charlie, Swinburne University of Technology, Australia
Reich, Yoram, Tel Aviv University, Israel
Riel, Andreas, Grenoble INP, France
Rohmer, Serge, Université de Technologie de Troyes, France
Rossi, Monica, Politecnico di Milano, Italy
Roth, Daniel, University of Stuttgart, Germany
Rotini, Federico, University of Florence, Italy
Royo, Marta, Universitat Jaume I, Spain
Ruiz-Pastor, Laura, Universitat Jaume I, Spain
Sakao, Tomohiko, Linköping University, Sweden
Sarkar, Prabir, Indian Institute of Technology Ropar, India
Sastre, Ricardo Marques, Federal University of Rio Grande do Sul, Brazil
Schabacker, Michael, Otto von Guericke University Magdeburg, Germany
Schaub, Harald, University of Bamberg, Germany
Schleich, Benjamin, Technische Universität Darmstadt, Germany
Schulte, Jesko, Blekinge Institute of Technology, Sweden
Schulze, Sven-Olaf, INCOSE, Germany
Seering, Warren, Massachusetts Institute of Technology, United States of America
Self, James, Ulsan National Institute of Science and Technology, South Korea
Şener, Bahar, Middle East Technical University, Turkiye
Shafiee, Sara, Technical University of Denmark, Denmark
Shea, Kristina, ETH Zurich, Switzerland
Silva, Arlindo, Singapore University of Technology and Design, Singapore
Singh, Ravindra, Delhi Technological University, India
Singh, Vishal, Indian Institute of Science, Bangalore, India
Siyam, Ghadir, BP, Canada
Smojver, Ivica, University of Zagreb FSB, Croatia
Snider, Chris, University of Bristol, United Kingdom
Song, Binyang, Virginia Tech, United States of America
Sosa, Ricardo, Monash University, New Zealand
Stal-Le Cardinal, Julie, CentraleSupélec, France
Stanković, Tino, ETH Zurich, Switzerland
Stark, Rainer G., Technische Universität Berlin, Germany
Stauffer, Larry Allen, University of Idaho, United States of America
Stechert, Carsten, Ostfalia University of Applied Sciences, Germany
Steinert, Martin, Norwegian University of Science and Technology, Norway
Stetter, Ralf, RWU University of Applied Sciences Ravensburg-Weingarten, Germany
Stylidis, Kostas, Chalmers University of Technology, Sweden
Sullivan, Brendan, Politecnico di Milano, Italy
Škec, Marija Majda, University of Zagreb FSB, Croatia
Škec, Stanko, University of Zagreb FSB, Croatia
Štorga, Mario, University of Zagreb FSB, Croatia
Tan, James Ah Kat, Singapore
Tavčar, Jože, Lund University, Sweden
Thoben, Klaus-Dieter, Universität Bremen / BIBA, Germany
Thoring, Katja, Technical University of Munich, Germany
Tiradentes Souto, Virginia, University of Brasilia, Brazil
Todeti, Somasekhara Rao, National Institute of Technology Karnataka, Surathkal, India
Tomiyama, Tetsuo, International Professional University of Technology in Tokyo, Japan
Törlind, Peter, Luleå University of Technology, Sweden
Trauer, Jakob, :em engineering methods AG, Germany
Tyl, Benjamin, APESA, France
Udiljak, Toma, University of Zagreb FSB, Croatia
Umeda, Yasushi, The University of Tokyo, Japan
Ura, Sharifu, Kitami Institute of Technology, Japan
Usenyuk-Kravchuk, Svetlana, Ural Federal University, Russia
Valderrama Pineda, Andres Felipe, Aalborg University, Denmark
Valjak, Filip, University of Zagreb Faculty of Architecture, School of Design, Croatia
Vallet, Flore, Laboratoire Genie Industriel, CentraleSupélec, Université Paris-Saclay, France
Van der Loos, Mike, The University of British Columbia, Canada
van der Vegte, Wilhelm Frederik, Delft University of Technology, The Netherlands
Vareilles, Elise, ISAE-SUPAERO, France
Vasantha, Gokula, Edinburgh Napier University, United Kingdom
Vezzetti, Enrico, Politecnico di Torino, Italy
Vielhaber, Michael, Saarland University, Germany
Vietor, Thomas, Technische Universität Braunschweig, Germany
Vignoli, Matteo, University of Bologna, Italy
Vrdoljak, Milan, University of Zagreb FSB, Croatia
Vrolijk, Ademir-Paolo, Government of Canada, Canada
Vukašinović, Nikola, University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
Vuletic, Tijana, University of Glasgow, United Kingdom
Wan, Fang, Southern University of Science and Technology, China
Wang, Yan, Georgia Institute of Technology, United States of America
Wang, Yue, The Hang Seng University of Hong Kong, Hong Kong
Wartzack, Sandro, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Wattts, Regan, University of Antwerp, Belgium
Watz, Matilda, Blekinge Institute of Technology, Sweden
Wendrich, Robert E., Rawshaping Technology RBSO, The Netherlands
Wenngren, Johan, Luleå University of Technology, Sweden
Wever, Renee, Linköping University, Sweden
Whitfield, Robert Ian, University of Strathclyde, United Kingdom
Wynn, David, University of Auckland, New Zealand
Xiong, Xue, Tongji Uiversity, China
Yanagisawa, Hideyoshi, The University of Tokyo, Japan
Yannou, Bernard, CentraleSupélec, France
Yildirim, Unal, Hubei University of Automotive Technology, China
Yip, Man Hang, University of Cambridge, United Kingdom
Zainal Abidin, Shahriman, Universiti Teknologi MARA, Malaysia
Zhang, Wendy, University of Canterbury, New Zealand
Zhang, Yanfang, Kyushu University, Japan
Zhang, Zai Fang, Shanghai University, China
Ziegler, Martin, Helbling Technik Bern AG, Switzerland
Zimmermann, Markus, Technical University of Munich, Germany
Zolghadri, Marc, ISAE-Supméca, France
Zorn, Stefan, University of Rostock, Germany
Žeželj, Dragan, University of Zagreb FSB, Croatia
Table of Contents
Circularity in product engineering - towards a forward-looking approach across product generations
Albert Albers, Leonard Tusch, Michael Jäckle, Moritz Seidler and Christoph Kempf
pp. 1 - 12
Feedback thought at the intersection of systems and design science
Igor Czermainski de Oliveira, Daniel Guzzo and Daniela C. A. Pigosso
pp. 13 - 22
Introducing a framework to translate user scenarios into engineering specifications with “action steps”
Ulugbek Vahobjon Ugli Ismatullaev and KwanMyung Kim
pp. 23 - 34
Innovation of meaning: design-driven study based on the interpretive theory of new meaning
Shotaro Kushi and Hideyoshi Yanagisawa
pp. 35 - 44
Virtual design hackathons: a data collection framework
Tomislav Martinec, Filip Valjak, Nikola Horvat, Mark Goudswaard, Daniel Nygård Ege, Robert Ballantyne, Martin Francis Berg, Tobias Glaser, Cornelius Grosse, Zvonimir Lipšinić, Fanika Lukačević, Marek S. Lukasiewicz, Robert Mašović, Adam McClenaghan, Teresa Monti, Henrik H. Øvrebø, Pascal Schmitt, Vegar Stubberud, Emmanuel TJ Taiwo and Ana Lisac
pp. 45 - 54
Playing against the rules: a new perspective on the potential of games and play as convivial and critical tools for imagining futures
Anna O. Meshcheryakova and Fabian Hemmert
pp. 55 - 64
Human- and design-centric source: comparison using requirements checklist
Gouri Naik and V. Srinivasan
pp. 65 - 74
Prototyping future societies: GIGA-mapping and narratives as design material
Brita Fladvad Nielsen, Gunika Rishi and Mari Bjerck
pp. 75 - 84
A proposed framework for data-driven human factors evaluation
Isabelle Ormerod, Henrikke Dybvik, Mike Fraser and Chris Snider
pp. 85 - 94
Operationalizing community-based open scientific design research benchmarks: application to model-based architecture design synthesis
Romain Pinquié, Lionel Roucoules, Pierre-Alain Yvars and Raphaël Chenouard
pp. 95 - 104
Human interaction with the physical world: a brief review of studies on affordances
Khyati Priya, Jayesh Pillai and Avinash Shende
pp. 105 - 114
Replication studies in engineering design - a feasibility study
Jonas Rode, Ingo Jonuschies, Sven Matthiesen and Kilian Gericke
pp. 115 - 124
Future design narratives: an interdisciplinary approach to a decolonial glossary
Victoria Rodriguez Schon and Manuela Celi
pp. 125 - 134
New combination of methods for supporting a simplified set-based design approach
Mikael Ström, Göran Gustafsson and Hans Johannesson
pp. 135 - 144
A theory landscape of design: mapping the theoretical discourse of the discipline
Katja Thoring and Roland M. Mueller
pp. 145 - 154
Shame cues: detecting shame in disguise and playing with new perspectives to inform the design process
June Kyong Trondsen
pp. 155 - 164
A new approach to derive variation shares by combining the C&C2 approach and the PGE model
Peter Michael Tröster, Giorgi Tsutskiridze, Tobias Dieck and Albert Albers
pp. 165 - 174
A novel approach towards utilizing graph analyzing objects arrangement - case studies from Airbnb homes in New York and Boston
Yanhua Yao
pp. 175 - 184
Design Theory and Research Methods
The Karakuri IoT toolkit: a collaborative solution for ideating and prototyping IoT opportunities
Álvaro Aranda-Muñoz, Yuji Yamamoto and Kristian Sandström
pp. 185 - 194
Aligning production requirements with product and production maturities: enhancing production preparation during product development
Rohith Areth Koroth, Fredrik Elgh, Martin Lennartsson and Dag Raudberget
pp. 195 - 204
On-site analysis of work-related stress to design workers-friendly manufacturing systems
Graziana Blandino, Samuele Colombo and Francesca Montagna
pp. 205 - 214
Implementing an open innovation process in the premium marine industry
Jonathan Burgess, Rob Fanner and Christian McLening
pp. 215 - 224
Investigating low data consistency in work planning processes - causes, measures, and opportunities
Valesko Dausch, Christopher Langner, Daniel Roth, Matthias Kreimeyer and Matthias R. Guertler
pp. 225 - 234
Exploring space manufacturing: designing a lunar factory for space-bound products in the new space economy
Eva De Francesco, Anna Ettorre, Federica Acerbi and Brendan P. Sullivan
pp. 235 - 244
Human in the loop: revolutionizing industry 5.0 with design thinking and systems thinking
Mohammad Hossein Dehbozorgi, James Postell, David Ward, Carlo Leardi, Brendan P. Sullivan and Monica Rossi
pp. 245 - 254
Human-centred engineering design: a cross-disciplinary product innovation practice
Sindre Wold Eikevåg, Jan Auernhammer, Christer W. Elverum, Henrikke Dybvik and Martin Steinert
pp. 255 - 264
Scientometric exploration of responsible innovation: mapping the knowledge landscape
Nuša Fain, Nikola Vukašinović and Andrej Kastrin
pp. 265 - 274
Prototyping industry 4.0: enhancing efficiency and productivity in small enterprises through iteration and low-cost solutions
Håkon Havsgård, Daniel Nygård Ege and Martin Steinert
pp. 275 - 284
Gamification as an innovative method in user experience design
David Kessing, Tim Katzwinkel and Manuel Löwer
pp. 285 - 294
Nurture employees’ creative behaviors: unveiling the impact of design thinking on human organizational behavior
Michele Melazzini and Gianluca Carella
pp. 295 - 304
Relation between purpose of individual agile elements and the need for their adaptation in product design & development
Marvin Michalides, Stefan Weiss, Emir Gadzo, Kristin Paetzold-Byhain and Alexander Koch
pp. 305 - 314
The relation between service and digital transition: implications for designers
Teresa Monti, Samuele Colombo, Francesca Montagna and Gaetano Cascini
pp. 315 - 324
Weak tie interactions in networking: five types of interaction structures
Georgina Nightingall and Weston Baxter
pp. 325 - 334
Towards a method for human-centred analysis of external variety
Olga Sankowski and Dieter Krause
pp. 335 - 344
Towards agile automotive development: benefits, challenges and organizational changes
Franziska Scharold and Kristin Paetzold-Byhain
pp. 345 - 352
Drivers and barriers for design and designers in interdisciplinary product development - a literature-based conceptual model
Bernd Stoehr, Christian Koldewey and Roman Dumitrescu
pp. 353 - 362
Design Organisation, Collaboration and Management
Understanding and definition of scanning and monitoring of the future space in the context of the product engineering process
Albert Albers, Carsten Thümmel, Jessica Schmidt, Stefan Eric Schwarz, Michael Schlegel,Andreas Siebe and Tobias Düser
pp. 363 - 372
Supporting the digital thread through the principles of complementarity
Yana Brovar, Saina Sadeghzadeh and Clement Fortin
pp. 373 - 382
Design delusions and prototyping: eliciting the link between prototypes and product performance
Daniel Nygård Ege, Mark Goudswaard, James Gopsill, Ben Hicks and Martin Steinert
pp. 383 - 392
The evolution of design patterns in joint decision-making spaces
Hermann Wolfram Klöckner and Katja Thoring
pp. 393 - 402
Enhancing design representations of information and knowledge of complex and long-living assets by applying system modelling techniques
Fabian Niklas Laukotka, Markus Christian Berschik and Dieter Krause
pp. 403 - 412
Introducing a multipliable BOM-based automatic definition of information retrieval in plant engineering
Max Layer, Sebastian Neubert and Ralph Stelzer
pp. 413 - 422
Automatic knowledge graph creation from engineering standards using the example of formulas
Janosch Luttmer, Mostafa Kandel, Dominik Ehring and Arun Nagarajah
pp. 423 - 432
Intelligent competency mapping for improving knowledge management in consulting firms
MohammadReza Mirafzal, Sabrine Fhal, Piyush Wadhera and Julie Stal-Le Cardinal
pp. 433 - 442
How to facilitate comparability among product models: applying a standardizing description approach
Lukas Paehler and Sven Matthiesen
pp. 443 - 452
Visualizing and analysing data-driven shift from decentralized to centralized automotive E/E architectures
Tejas Pravin Phadnis, Nils Feyerabend and Joachim Axmann
pp. 453 - 462
Integration of product development data for further ontological utilization
Jessica Pickel, Sebastian Bickel, Stefan Goetz and Sandro Wartzack
pp. 463 - 472
Enhancing knowledge management in the engineering design process through a communication platform
Sinan Ugurlu, Manfred Grafinger, Detlef Gerhard and Pinar Demircioglu
pp. 473 - 482
Design Information and Knowledge
Evaluation of a multi-user requirements axiomatic design decision support tool for manufacturing process selection
Edward Abela, Philip Farrugia, Pierre Vella, Glenn Cassar and Maria Victoria Gauci
pp. 483 - 492
Applying a product modularization approach on the case of a battery pack
Julia Beibl, Katharina Zumach, Sven Wehrend, Marc Züfle, Eugen Hein, Benedikt Plaumann and Dieter Krause
pp. 493 - 502
Modeling uncertain requirements
Lukas Block
pp. 503 - 512
Designing a framework for actuators for adaptive structures
Matthias J. Bosch, Markus Nitzlader, Matthias Bachmann, Hansgeorg Binz, Lucio Blandini and Matthias Kreimeyer
pp. 513 - 522
Using cluster analysis to enhance a method for the management of disturbance factors via product structures
Richard Breimann, Laura Luran Sun and Eckhard Kirchner
pp. 523 - 532
Automatic evaluation of the misplacement risk during manual assembly based on a CAD design
Alexander De Cock, Ncamisile Khanyile and Bieke Decraemer
pp. 533 - 542
Developing a method to improve unknown identification and design efforts for environmental transition: a case study in the packaging industry
Marion Deshoulières, Pascal Le Masson and Benoît Weil
pp. 543 - 552
Challenges of the integrative product and production system development
Jan-Philipp Disselkamp, Ben Schütte and Roman Dumitrescu
pp. 553 - 562
Data- and simulation-based material behaviour prediction
Anton Dybov, Carina Fresemann and Rainer Stark
pp. 563 - 572
Data-driven support for CAD parts modelling based on automated estimated production planning - approach and user research
Martin Erler, Sebastian Langula, Christian Wölfel, Julia Schneider, Christiane Kunath and Michael Königs
pp. 573 - 582
Learnings from developing a custom virtual assembly environment for mountability issues of cooling cabinets
Georg Hackenberg and Christian Zehetner
pp. 583 - 592
From tears to tiers - architectural principles for federated PLM landscapes
Erik Herzog, Johan Tingström, Johanna Wallén Axehill, Åsa Nordling Larsson and Christopher Jouannet
pp. 593 - 602
What can we learn from outstanding designers? The relationship between design expertise and prototyping
Birgit Jobst, Katja Thoring and Petra Badke-Schaub
pp. 603 - 612
New methodology for the characterization of 3D model reconstructions to meet conditions of input data and requirements of downstream applications
Robert Joost, Stephan Mönchinger and Kai Lindow
pp. 613 - 622
Enhancing the IFM framework based on a meta-analysis of other design methods
Merlin Krüger, Kilian Gericke and Stefan Zorn
pp. 623 - 632
Future-robust product design - validating influencing factors on upgradeable mechatronic systems
Maximilian Kuebler, Carolin Lange, Bastian Glasmacher, Tobias Düser and Albert Albers
pp. 633 - 642
A comparative study of VR CAD modelling tools for design
Aman Kukreja, Christopher Michael Jason Cox, James Gopsill and Chris Snider
pp. 643 - 652
Engineering designers’ CAD performance when modelling from isometric and orthographic projections
Fanika Lukačević, Niccolò Becattini and Stanko Škec
pp. 653 - 662
The impact of specialized software on concept generation
Julian Martinsson Bonde, Richard Breimann, Johan Malmqvist, Eckhard Kirchner and Ola Isaksson
pp. 663 - 672
Design methodology for optimal sensor placement for cure monitoring and load detection of sensor-integrated, gentelligent composite parts
Sören Meyer zu Westerhausen, Alexander Kyriazis, Christian Hühne and Roland Lachmayer
pp. 673 - 682
Are generative design tools creative? A characterisation of tools throughout the design process
Owen Rahmat Peckham, Ben Hicks and Mark Goudswaard
pp. 683 - 692
Reducing uncertainty regarding customer expectations for a sustainable car interior design integrated in a data-informed design approach
Bastian Quattelbaum, Lara Amelie Geiger, Kostas Stylidis and Rikard Söderberg
pp. 693 - 702
An approach for reverse engineering and redesign of additive manufactured spare parts
Marija Rešetar, Filip Valjak, Marina Grabar Branilović, Mario Šercer and Nenad Bojčetić
pp. 703 - 712
Assessing yacht design processes: a comparison of traditional and integrated methodologies
Ludovico Ruggiero, Massimo Piccioni and Arianna Bionda
pp. 713 - 722
A novel heuristic approach to detect induced forming defects using point cloud scans
Muhammad Shahrukh Saeed, Sheharyar Faisal, Boris Eisenbart, Matthias Kreimeyer, Muhammad Hamas Khan, Muhammad Zeeshan Arshad, Racim Radjef, Markus Wagner and Eiman Nadeem
pp. 723 - 734
Factors that determine design similarity
Kazuko Sakamoto and Yuya Kinzuka
pp. 735 - 744
Future-robust product portfolio development: insights into the advancement of product portfolios in companies - an interview study
Michael Schlegel, Markus Just, Ingrid Wiederkehr, Carsten Thümmel, Christoph Kempf,Christian Koldewey, Roman Dumitrescu and Albert Albers
pp. 745 - 754
Management of rule-based product-portfolios with high variance: a systematic literature review
Thorsten Schmidt and Frank Mantwill
pp. 755 - 764
Decision making support for designers at the early design stage regarding narrowing down the range values of design variables
Yoshiyuki Shimada, Daichi Akutsu, Shinnosuke Kodama, Shuichi Kondo, Shigeki Hiramatsu, Seiji Fukui, Hiroshi Unesaki, Takashi Hatano, Kazuhiro Aoyama and Masato Inoue
pp. 765 - 774
Mixed reality prototyping: a framework to characterise simultaneous physical/virtual prototyping
Chris Snider, Aman Kukreja, Christopher Michael Jason Cox, James Gopsill and Lee Kent
pp. 775 - 784
Designing lab-on-a-chip systems with attribute dependency graphs
Johannes Soika, Tobias Wanninger, Patrick Muschak, Sebastian Schwaminger, Sonja Berensmeier and Markus Zimmermann
pp. 785 - 794
A model to describe logistics service architecture based on product architecture
Erika Marie Strøm, Tine Meidahl Münsberg and Lars Hvam
pp. 795 - 804
Data-informed design in the automotive industry: customer acceptance study in Sweden and China on radical car design
Kostas Stylidis, Bastian Quattelbaum, Florian Konrad, Joe Simpson, Samuel Lorin and Rikard Söderberg
pp. 805 - 814
Enhancing design automation for components of electric machines: a systematic approach
Niklas Umland, Anton Wiberg, Kora Winkler, Jakob Jung and David Inkermann
pp. 815 - 824
Optimization-based design support for engineer-to-order product quotation
Olle Vidner, Anton Wiberg, Robert Pettersson, Johan A. Persson and Johan Ölvander
pp. 825 - 834
Evaluation of the methodical framework for the management of uncertainty in the context of the integration of sensory functions
Peter Welzbacher, Sawa Vinzenz Witt, Yanik Koch and Eckhard Kirchner
pp. 835 - 844
Perception-centric design considerations for low-cost haptic emulation in prototypes
Mike Miroslav Wharton, Christopher Michael Jason Cox, James Gopsill, Aman Kukreja and Chris Snider
pp. 845 - 854
6 degree of freedom positional object tracking for physical prototype digitisation
Michael Wyrley-Birch, Aman Kukreja, James Gopsill, Christopher Michael Jason Cox and Chris Snider
pp. 855 - 864
Criticality-based planning of prototype sequences
Stefan Zorn, Tobias Glaser and Kilian Gericke
pp. 865 - 874
Design Methods and Tools
The imperative of assessing negative creativity in design: a multi-dimensional approach
Petra Badke-Schaub, Katja Thoring, Harald Schaub and Roland M. Mueller
pp. 875 - 884
Breaking cultural barriers: an integrated methodology for challenge-driven co-creation projects
Annika Bastian, Christoph Kempf, Paulin Rudolph and Albert Albers
pp. 885 - 894
Creativity of products as meant by ordinary people: to what extent do novelty and usefulness matter?
Aurora Berni, Yuri Borgianni and Demis Basso
pp. 895 - 904
The use of occurrences of ideas for constructing and characterizing the design space
Hernan Casakin, Hadas Sopher, John S. Gero and Or Haim Anidjar
pp. 905 - 914
Exploring metacognitive processes in design ideation with text-to-image AI tools
Hao-Yu Chang and Jo-Yu Kuo
pp. 915 - 924
Chronobiology of pupil dilation in design students during idea generation
Samuele Colombo, John S. Gero, Alessandro Mazza and Marco Cantamessa
pp. 925 - 934
Design strategies to facilitate second-hand clothing acquisition
Marie Das, Ingrid Moons and Els Du Bois
pp. 935 - 944
Investigating differences in brain activity between physical and digital prototyping in open and constrained design tasks
Henrikke Dybvik, Adam McClenaghan, Mariya Stefanova Stoyanova Bond, Asbjørn Svergja, Tripp Shealy, Chris Snider, Pasi Aalto, Martin Steinert and Mark Goudswaard
pp. 945 - 954
How designers think creatively: an exploratory study in the use of visual and emotional mental imagery
Ian Marcus Edgecomb, Ross Brisco and Andrew Wodehouse
pp. 955 - 964
Narrative drives design decision-making
Scott Ferguson, Lisa Retzlaff, Kris Bryden and Kenneth Mark Bryden
pp. 965 - 974
The influence of culture on creativity in ideation: a review
Zhengya Gong, Milene Gonçalves, Vijayakumar Nanjappan and Georgi V. Georgiev
pp. 975 - 984
Evaluating design approaches for encouraging behavior change in editors: exploring a digital nudging strategy in a non-personalized recommender system to promote adoption of augmented analytics
Tanja Heinrich and Oliver Szasz
pp. 985 - 994
Unravelling experiences, barriers, and design strategies for encouraging reusable takeaway cup usage
Laure Herweyers, Els Du Bois and Ingrid Moons
pp. 995 - 1004
Possession and dispossession: a dual phenomenon in digital artefacts
Pranati Kompella and Neelakantan Keshavan
pp. 1005 - 1014
The EmotionProbe: an exploration of design students’ emotions when designing
Hazar Taissier Marji, Paul Rodgers and Ross Brisco
pp. 1015 - 1024
Mediators of the relationship between physical indoor spaces and individual creativity
Chris McTeague and Katja Thoring
pp. 1025 - 1034
DS-Viz: a method for visualising design spaces
Esdras Paravizo and Nathan Crilly
pp. 1035 - 1044
Exploring gesture generation for smartwatches: is user elicitation enough?
Saugata Pramanik, Sahil Pabbathi and Shakuntala Acharya
pp. 1045 - 1054
Design to fail? The reasonably foreseeable failure and misuse
Harald Schaub and Petra Badke-Schaub
pp. 1055 - 1064
Towards cycling engagement by mapping design interventions to observed barriers: an example from Glasgow’s bike share programme
Mia Shepherd, Tripp Shealy, Lewis Urquhart, Deirdre Harrington and Anja Maier
pp. 1065 - 1074
Characteristics of paralinguistic communication indicating pre-resonance during co-creative design grasped by decision tree analysis
Karen Shichijo and Akane Matsumae
pp. 1075 - 1084
Assessment of structuredness of problems in design
Sanjay Singh and Amaresh Chakrabarti
pp. 1085 - 1094
Effect of team diversity on teams’ design space: a computational approach
Marija Majda Škec, Mario Štorga and John S. Gero
pp. 1095 - 1104
“Ideas are really…” - supporting collaborative dialogues and community of practice for innovation via CO:RE cards
Safia Najwa Suhaimi, Andrew Walters and Jo Ward
pp. 1105 - 1114
Co-design in virtual environments with 3D scanned childcare rooms in social virtual reality
Yuki Taoka, Momoko Nakatani, Takumi Sato, Kaho Kagohashi, Fuyumi Iwasawa,Shouichi Hasegawa, Shigeru Owada and Shigeki Saito
pp. 1115 - 1124
Gender differences in design creativity
Virginia Tiradentes Souto, Luciane Maria Fadel and Carla Galvão Spinillo
pp. 1125 - 1134
Exploring designers’ cognitive abilities in the concept product design phase through traditional and digitally-mediated design environments
Muhammad Tufail, Shahab Zaib, Sahr Uzma, Raja Mubashar Karim and KwanMyung Kim
pp. 1135 - 1146
An EEG study to understand semantic and episodic memory retrieval in creative processes
Yuan Yin and Peter Childs
pp. 1147 - 1156
Human Behaviour and Design Creativity
Interpretation of sustainability philosophies into product design for awareness, cohesion, and equity
Laura Isabel Acevedo, Daniela C. A. Pigosso and Tim C. McAloone
pp. 1157 - 1168
Interdisciplinary Transition Innovation, Management, and Engineering (InTIME) Design: an intersection analysis of design approaches for whole-system sustainability
Florian Ahrens, Susan Krumdieck and Daniel Kenning
pp. 1169 - 1178
Remanufacturing as a circular design strategy in healthcare: integrating socio-technical and environmental-economic assessments
Amanda Worsøe Andersen, Siri Fritze Jørgensen, Wendy Gunn and Monia Niero
pp. 1179 - 1188
Uncovering rebound effects of sufficiency-oriented product-service systems: a systematic review
Elise Marie Andrew, Jeroen van den Bergh and Daniela C. A. Pigosso
pp. 1189 - 1198
Circular products: the balance between sustainability and excessive margins in design
Arindam Brahma, Sophie I. Hallstedt, David C. Wynn and Ola Isaksson
pp. 1199 - 1208
Product-service systems in large automotive OEMs: characterising the decision-making process when developing and introducing vehicle sharing/pooling schemes
Lucia C. Burtnik Urueta and Elies Dekoninck
pp. 1209 - 1218
Durability as a techno-socio-economic concept
Felician Campean and Claudia Eckert
pp. 1219 - 1228
Understanding a SPSS-aided packaging-free shopping practice
Ruihua Chen and Xueqing Miao
pp. 1229 - 1238
Developing readiness levels for risk assessment in green transition engineering projects
Andy Mattulat Filipovic, Torgeir Welo and Josef Oehmen
pp. 1239 - 1248
Assessing the disassembly performance of washing machines through the design for circular disassembly methodology
Giovanni Formentini, Thorvald Alrø Martiny, Christian Møller, Teodor Vernica and Devarajan Ramanujan
pp. 1249 - 1258
Design and collaboration strategies for circular economy implementation across the value chain
Giovana M. Gomes, Daniela C. A. Pigosso and Tim C. McAloone
pp. 1259 - 1268
What Italian furniture companies do towards sustainable transition? Design actions and strategies showcased during Milan Design Week 2023
Silvia Maria Gramegna, Francesca Mattioli and Xue Pei
pp. 1269 - 1278
Identifying rebound effects in product-service systems: actors, mechanisms, triggers and drivers
Daniel Guzzo and Daniela C. A. Pigosso
pp. 1279 - 1288
Scenario building guidelines for sustainable innovation
François Haeberle, Giácomo Parolin and Daniela C. A. Pigosso
pp. 1289 - 1298
Operationalizing leverage points in business model design for sustainable systems change
Cadence Hsien and Steve Evans
pp. 1299 - 1308
Modelling an ecosystem of business models in a circular value chain: the circular business ecosystem model canvas
Avyay Jamadagni, Marco Aurisicchio and Lars Nybom
pp. 1309 - 1318
Systems thinking towards holistic, sustainability-oriented assessment and decision-making for lightweighting
Katharina Johnston-Lynch, Robert Ian Whitfield and Dorothy Evans
pp. 1319 - 1328
Alignment of the functional structure with sustainability aspects in product development - combining the strengths of the functional structure with the MECO matrix
Björn Kokoschko, Laura Augustin, Michael Schabacker and Christiane Beyer
pp. 1329 - 1338
Data-driven life cycle assessment for mechatronic systems: a comparative analysis of environmental impact assessments
Artur Krause, Steffen Wagenmann, Katharina Ritzer, Albert Albers and Nikola Bursac
pp. 1339 - 1348
Navigating complexity: visualising sustainable product development knowledge through dynamic heatmaps
Gerald Kremer, Sarah Aboumorra and Rainer Stark
pp. 1349 - 1358
Sustainability criteria for introducing new technologies in low-income contexts
Adam Mattias Mallalieu, Amanda Jonasson, Sara Petersson, Marlene Rosendal, Sophie I. Hallstedt, Lars Almefelt and Ola Isaksson
pp. 1359 - 1368
Selecting sustainability indicators for smart product design based on industry 4.0/5.0 technologies: analysis and proposal of a methodological framework
Bertrand Marconnet, Raoudha Gaha, Carla Assuad, Kristian Martinsen and Benoît Eynard
pp. 1369 - 1378
Design strategies for consumers’ continued usage of reusable packaging systems (RPSS)
Xueqing Miao, Lise Magnier and Ruth Mugge
pp. 1379 - 1388
Assessing sustainable recyclability of battery systems: a tool to aid design for disassembly
Fabio Marco Monetti, Pablo Zaguirre Martínez and Antonio Maffei
pp. 1389 - 1398
What’s the catch? Trade-off challenges in early design for sustainability
Giácomo Parolin, Tim C. McAloone and Daniela C. A. Pigosso
pp. 1399 - 1408
Designing products for material simplifiers: antinomy or prospective for design?
Céline Perea and Cédric Masclet
pp. 1409 - 1416
Consumer behaviour in the context of circular economy: a systematic literature review
Nicole Sofia Rohsig Lopez and Jérémy Legardeur
pp. 1417 - 1426
Driving sustainable mobility: a study of electric vehicle adoption in rural India
Aniruddh Dnyandeo Satpute, Parinita Rai and Prasad Onkar
pp. 1427 - 1436
Incorporating sustainability into product lifecycle management: a systematic literature review
Anne Seegrün, Louis Hardinghaus, Theresa Riedelsheimer and Kai Lindow
pp. 1437 - 1446
A virtual reality experience to raise sustainability awareness within the fashion industry
Elena Spadoni, Andrea Fiocca, Gianluca Zoni, Lina Maria Useche Infante, Lidia Cerutti, Paolo Maccarrone, Marina Carulli and Monica Bordegoni
pp. 1447 - 1456
Comparison of e-scooter tyre performance using rolling resistance trailer
George Stilwell, Shayne Gooch and Martial Lafitte
pp. 1457 - 1466
Tactility in perception of biobased composites
Manu Thundathil, Nicholas John Emerson, Ali Reza Nazmi, Bahareh Shahri, Jörg Müssig and Tim Huber
pp. 1467 - 1476
A transition approach for reuse and repair of manufactured products
Flore Vallet, Benjamin Tyl, François Cluzel and Cédric Masclet
pp. 1477 - 1486
Using the low-tech concept to create scenarios: an analysis of its potential to design for sustainable urban future
Flore Vallet and Tjark Gall
pp. 1487 - 1496
Explaining the rebound effects of sustainable design: a behavioural perspective
Imke G. H. Van der Loo and Daniela C. A. Pigosso
pp. 1497 - 1506
Towards a unified absolute environmental sustainability decoupling indicator
Manon Villers, Daniela C. A. Pigosso, Thomas J. Howard and Tim C. McAloone
pp. 1507 - 1516
Integration of sustainability into product development: insights from an industry survey
Sachira Vilochani, Tim C. McAloone and Daniela C. A. Pigosso
pp. 1517 - 1526
Assessment of empowerment via inclusion of people in product lifecycle processes
Naz Yaldiz and Amaresh Chakrabarti
pp. 1527 - 1536
Design measures to address carbon emissions in products’ lifecycle: an empirical analysis
Thayla Zomer, Eduardo de Senzi Zancul, Paulo Augusto Cauchick-Miguel and Eloiza Kohlbeck
pp. 1537 - 1546
Design for Sustainability
Requirements elicitation in board game design for children with developmental language disorder (DLD)
Edward Abela, Emanuel Balzan, Philip Farrugia, Donia Stellini and Daniela Gatt
pp. 1547 - 1556
Bridging the gap: a multidisciplinary approach to integrated care solutions for the aging population
Max John Bateson and Yonghun Lim
pp. 1557 - 1566
Design of a healthcare ecosystem to improve user experience in pediatric urotherapy
Lola Bladt, Rose-Farah Blomme, Anka J. Nieuwhof-Leppink, Alexandra Vermandel, Gunter De Win and Lukas Van Campenhout
pp. 1567 - 1576
Implementing the model-based systems engineering (MBSE) approach to develop an assessment framework for healthcare facility design
Tahere Golgolnia, Timoleon Kipouros, P. John Clarkson, Gesine Marquardt and Maja Kevdzija
pp. 1577 - 1586
Surveying factors that influence healthcare personnel in the transition to reusable surgical gowns
Charlotte Harding, Ingrid Moons, Regan Watts, Gunter De Win and Els Du Bois
pp. 1587 - 1596
Designing remote patient and family centred interventions: an exploratory approach
Julian Houwen, Ragini S. Karki, Veronica R. Janssen, Valeria Pannunzio, Douwe E. Atsma and Maaike S. Kleinsmann
pp. 1597 - 1606
Design as a practice for implementing complex digital health: preliminary results from an interview study in the Netherlands
Fredrik K. Karlsson, Valeria Pannunzio, Dirk Snelders and Maaike S. Kleinsmann
pp. 1607 - 1616
Emotional design of medical devices: exoskeletons and post-stroke recovery devices
Frederik Kiersgaard Lund, Luke Edward Eric Feast, Milo Marsfeldt Skovfoged, Hendrik Knoche, Mostafa Mohammadi, Lotte N. S. Andreasen Struijk and Linda Nhu Laursen
pp. 1617 - 1626
Towards designing for health outcomes: implications for designers in eHealth design
Hosana Cristina Morales Ornelas, Maaike S. Kleinsmann and Gerd Kortuem
pp. 1627 - 1636
Designing healthcare systems for earlier diagnosis and prevention of dementia
Coco Newton, Jiwon Jung, Maaike S. Kleinsmann and P. John Clarkson
pp. 1637 - 1646
StudyWell: a co-design project for enhancing student mental health and wellbeing through service design and relational welfare
Brita Fladvad Nielsen, Nina Petersen Reed, Ottar Ness, Mari Bjerck, Arnfrid Farbu Pinto, Ipar Memet and Katie Aurora Lineer
pp. 1647 - 1656
Co-designing for the NHS: the development of sustainable theatre garments
Paul Rodgers, Euan Winton, Lewis Urquhart, Jonathan O’Reilly and Carole Anderson
pp. 1657 - 1666
Toward a design methodology for configuring assistive wearables
David W. Rosen, Christina Youngmi Choi and Anoop Kumar Sinha
pp. 1667 - 1676
Considerations in the testing of a minimum viable product in healthcare
Komal Shah and Manish Arora
pp. 1677 - 1686
Evaluating a web-based guide for designing digital patient experiences: preliminary results of a user test with design students
Tingting Wang, Yun Wang, P. John Clarkson, Judith Rietjens and Marijke Melles
pp. 1687 - 1696
Designing positive emotional experiences of wearable medical technology for type 1 diabetes
Ryan Charles Williams and Yonghun Lim
pp. 1697 - 1706
Design for Healthcare
Play well, print well: using LEGO bricks as an intuitive benchmarking tool for 3D printers
Alan Air and Andrew Wodehouse
pp. 1707 - 1716
Additively manufactured 3D micro scarf adhesive joints
Michael Ascher and Ralf Späth
pp. 1717 - 1726
Design and evaluation of non-planar material extrusion on a 3-axis printer
Samuel Bengtsson, Axel Nordin and Jože Tavčar
pp. 1727 - 1736
Design challenges in leveraging binder jetting technology to innovate the medical instrument field
Lorenzo Cocchi, Marco Mariani, Serena Graziosi, Roberto Viganò and Nora Lecis
pp. 1737 - 1746
A knowledge-driven, integrated design support tool for additive manufacturing
Claudius Ellsel and Rainer Stark
pp. 1747 - 1756
Additive manufacturing of individual bone implants made of bioresorbable calcium phosphate cement using the example of large skull defects
Stefan Holtzhausen, Philipp Sembdner, Martin Pendzik, Holger Wilhelm Rudolf Schmidt and Kristin Paetzold-Byhain
pp. 1757 - 1768
The energy performance assessment method to establish the best part build orientation in additive manufacturing
Marco Mandolini, Mikhailo Sartini, Marta Rossi, Claudio Favi and Marco Marconi
pp. 1769 - 1778
Investigating designers’ preferred learning media to design for additive manufacturing
Martins Obi, Patrick Pradel, Matt Sinclair, Richard Bibb and Mark Evans
pp. 1779 - 1788
Stress concentrations and design for additive manufacturing: a design artefact approach to investigation
Didunoluwa Obilanade, Owen Rahmat Peckham, Adam McClenaghan, James Gopsill and Peter Törlind
pp. 1789 - 1798
Exploring high-stiffness pellets as filaments in fused filament fabrication
Martin Lilletvedt Rasmussen, Simen Gjethammer Grønvik, Henrik H. Øvrebø, Ben Hicks, Chris Snider, Martin Steinert, Christer W. Elverum and Sindre Wold Eikevåg
pp. 1799 - 1808
A Bayesian expert system for additive manufacturing design assessment
Benedict Alexander Rogers, Neill Campbell, Mandeep Dhanda, Alexander James George Lunt, Elise Catherine Pegg and Vimal Dhokia
pp. 1809 - 1818
An analytic cost model for bound metal deposition
Mikhailo Sartini, Iacopo Bianchi, Alessio Vita, Michele Germani and Marco Mandolini
pp. 1819 - 1828
A proposal for guiding the selection of suitable DfAM support based on experiential knowledge
Pascal Schmitt, Lisa Siewert and Kilian Gericke
pp. 1829 - 1838
Optical and mechanical testing of 3D printed parts made of high-viscosity silicone to identify process parameters and design advice for 3D printing and printer development
Joel Schön, Robin Löffler and Michael Koch
pp. 1839 - 1848
Printing study and design guideline for small hollow structures in medical technology
Eve Sobirey, Marie Wegner, Fabian Niklas Laukotka and Dieter Krause
pp. 1849 - 1858
Democratising dry adhesion development with consumer-grade AM
Vegar Stubberud, Martin Steinert and Håkon Jarand Dugstad Johnsen
pp. 1859 - 1868
Providing a knowledge-based design catalog as an approach to support the development of design for additive manufacturing skills
Gregory-Jamie Tüzün, Daniel Roth and Matthias Kreimeyer
pp. 1869 - 1878
Topology optimisation of multiple robot links considering screw connections
Tobias Wanninger, Jintin Frank and Markus Zimmermann
pp. 1879 - 1888
Additive manufacturing in fluid power with novel application to hydraulic pump design
Anton Wiberg, Liselott Ericson, Johan A. Persson and Johan Ölvander
pp. 1889 - 1898
Analysing shrinkage compensation in additive manufacturing: a comparative study of reverse engineering and gauge-based methods
Alessio Zanini, Marco Marconi and Gianluca Rubino
pp. 1899 - 1908
Design for Additive Manufacturing
Machine learning-based virtual sensors for reduced energy consumption in frost-free refrigerators
Alejandro Alcaraz, Dennis Ilare, Alessandro Mansutti and Gaetano Cascini
pp. 1909 - 1918
Datasets in design research: needs and challenges and the role of AI and GPT in filling the gaps
Mohammad Arjomandi Rad, Tina Hajali, Julian Martinsson Bonde, Massimo Panarotto, Kristina Wärmefjord, Johan Malmqvist and Ola Isaksson
pp. 1919 - 1928
Critical component detection in assemblies: a graph centrality approach
Robert Ballantyne, Adam McClenaghan, Oliver Schiffmann and Chris Snider
pp. 1929 - 1938
Stimulating design ideation with artificial intelligence: present and (short-term) future
Aurora Berni, Yuri Borgianni, Federico Rotini, Milene Gonçalves and Katja Thoring
pp. 1939 - 1948
Extending the function failure modes taxonomy for intelligent systems with embedded AI components
Felician Campean, Unal Yildirim, Aleksandr Korsunovs and Aleksandr Doikin
pp. 1949 - 1958
Generative large language models in engineering design: opportunities and challenges
Filippo Chiarello, Simone Barandoni, Marija Majda Škec and Gualtiero Fantoni
pp. 1959 - 1968
Assessing text-image patent datasets with text-based metrics for engineering design applications
Marco Consoloni, Vito Giordano and Gualtiero Fantoni
pp. 1969 - 1978
Towards the digital factory twin - design guide for creating a 3D factory model
Jan-Philipp Disselkamp, Robin Grothe, Jonas Lick, Ben Schütte, Sascha Brüne, Luca Schröder and Roman Dumitrescu
pp. 1979 - 1988
Sketch2Prototype: rapid conceptual design exploration and prototyping with generative AI
Kristen M. Edwards, Brandon Man and Faez Ahmed
pp. 1989 - 1998
Benchmarking AI design skills: insights from ChatGPT’s participation in a prototyping hackathon
Daniel Nygård Ege, Henrik H. Øvrebø, Vegar Stubberud, Martin Francis Berg, Martin Steinert and Håvard Vestad
pp. 1999 - 2008
Automatic identification of role-specific information in product development: a critical review on large language models
Dominik Ehring, Ismail Menekse, Janosch Luttmer and Arun Nagarajah
pp. 2009 - 2018
Integrating large language models for improved failure mode and effects analysis (FMEA): a framework and case study
Ibtissam El Hassani, Tawfik Masrour, Nouhan Kourouma, Damien Motte and Jože Tavčar
pp. 2019 - 2028
Surrogate-based design optimization of the binder cover combining performance and production cost
Pavel Eremeev, Hendrik Devriendt, Alexander De Cock and Frank Naets
pp. 2029 - 2038
A survey on the industry’s perception of digital twins - a follow-up to the digital twin workshop at the DESIGN Conference 2022
Michel Fett, Julius Zwickler, Fabian Wilking, Stefan Goetz, Sebastian Schweigert-Recksiek, Ben Hicks, Oscar Nespoli, Kristina Wärmefjord, Sandro Wartzack and Eckhard Kirchner
pp. 2039 - 2048
Towards an automatic contradiction detection in requirements engineering
Alexander Elenga Gärtner and Dietmar Göhlich
pp. 2049 - 2058
Towards the extraction of semantic relations in design with natural language processing
Vito Giordano, Marco Consoloni, Filippo Chiarello and Gualtiero Fantoni
pp. 2059 - 2068
A low-cost non-intrusive spatial hand tracking pipeline for product-process interaction
James Gopsill, Aman Kukreja, Christopher Michael Jason Cox and Chris Snider
pp. 2069 - 2078
The digital thread for system lifecycle management with a native graph database in a polyglot architecture
Nico Kasper, Michael Pfenning and Martin Eigner
pp. 2079 - 2088
Improving sustainability of additive manufacturing processes based on digital twins - a case study
Jessica Kos, Philipp Schröder, Jakob Trauer, Felix Endress, Markus Mörtl and Markus Zimmermann
pp. 2089 - 2098
Challenges for capturing data within data-driven design processes
Christopher Langner, Yevgeni Paliyenko, Benedikt Müller, Daniel Roth, Matthias R. Guertler and Matthias Kreimeyer
pp. 2099 - 2108
D3IKIT: data-driven design innovation kit
Boyeun Lee and Saeema Ahmed-Kristensen
pp. 2109 - 2118
Navigating from data-driven design to designing with ML: a case study of truck HMI system design
Yi Luo, Dimitrios Gkouskos, Nancy L. Russo and Minjuan Wang
pp. 2119 - 2128
Nature’s lessons, AI’s power: sustainable process design with generative AI
Mas’udah Mas’udah and Pavel Livotov
pp. 2129 - 2138
Minimizing occupant loads in vehicle crashes through reinforcement learning-based restraint system design: assessing performance and transferability
Janis Mathieu, Parul Gupta, Michael Di Roberto and Michael Vielhaber
pp. 2139 - 2148
The DHSmart model for smart product-service system (smart PSS): dynamic, data-driven, human-centred
Nadia Mirshafiee, Ji Han and Saeema Ahmed-Kristensen
pp. 2149 - 2158
Self-optimizing digital factory twin: an industrial use case
Christian Nigischer, Florian Reiterer, Sébastien Bougain and Manfred Grafinger
pp. 2159 - 2168
From human-centred to humanity-ecosystem centred design. How can we dialogue with AI?
Zeynep Oğrak and Yener Altıparmakoğulları
pp. 2169 - 2178
Automating the assembly planning process to enable design for assembly using reinforcement learning
Rafael Parzeller, Dominik Koziol, Tizian Dagner and Detlef Gerhard
pp. 2179 - 2186
An AI-based prosthesis framework fostering an adaptive amputee healthcare service
Nicholas Patiniott, Jonathan C. Borg, Emmanuel Francalanza, Joseph P. Zammit, Pierre Vella, Alfred Gatt and Kristin Paetzold-Byhain
pp. 2187 - 2196
Large language models in complex system design
Alejandro Pradas Gomez, Petter Krus, Massimo Panarotto and Ola Isaksson
pp. 2197 - 2206
Inspiration or indication? Evaluating the qualities of design inspiration boards created using text to image generative AI
Charlie Ranscombe, Linus Tan, Mark Goudswaard and Chris Snider
pp. 2207 - 2216
Automatic movement pattern analysis for data-driven system optimisation - an example for fattening livestock farming monitoring system
Gurubaran Raveendran, Sören Meyer zu Westerhausen, Johanna Wurst and Roland Lachmayer
pp. 2217 - 2226
Concept for enhanced intuition in development management through exploratory data analysis using an extended factor analysis of mixed data
Michael Riesener, Maximilian Kuhn, Benjamin Nils Johannes Lender and Günther Schuh
pp. 2227 - 2236
Towards a process for the creation of synthetic training data for AI-computer vision models utilizing engineering data
Sebastian Schwoch, Maximilian Peter Dammann, Johannes Georg Bartl, Maximilian Kretzschmar, Bernhard Saske and Kristin Paetzold-Byhain
pp. 2237 - 2246
Human-AI collaboration by design
Binyang Song, Qihao Zhu and Jianxi Luo
pp. 2247 - 2256
A conceptual MCDA-based framework for machine learning algorithm selection in the early phase of product development
Sebastian Sonntag, Erik Pohl, Janosch Luttmer, Jutta Geldermann and Arun Nagarajah
pp. 2257 - 2266
Designers’ perceptions of a sensor-enabled diary method for enhancing user research
Yuki Taoka, Tomoyuki Tanaka, Momoko Nakatani and Shigeki Saito
pp. 2267 - 2276
Digital twins to increase sustainability throughout the system life cycle: a systematic literature review
Malte Trienens, Rik Rasor, Aschot Kharatyan, Roman Dumitrescu and Harald Anacker
pp. 2277 - 2286
Harmonizing human-AI synergy: behavioral science in AI-integrated design
Dirk Van Rooy and Kristof Vaes
pp. 2287 - 2296
Towards digital representations for brownfield factories using synthetic data generation and 3D object detection
Javier Villena Toro, Lars Bolin, Jacob Eriksson and Anton Wiberg
pp. 2297 - 2306
How good is ChatGPT? An exploratory study on ChatGPT’s performance in engineering design tasks and subjective decision-making
Wanyu Xu, Maulik Chhabilkumar Kotecha and Daniel A. McAdams
pp. 2307 - 2316
Artificial Intelligence and Data-Driven Design
Application of universal design principles on computer mouse interface: developing a universal mouse pointing and control system to provide affordance to the left-handed users
Abhinav Basak and Shatarupa Thakurta Roy
pp. 2317 - 2326
An integrated survey-simulation approach for exoskeleton performance estimation
Niccolò Becattini, Luca Patriarca, Diego Scaccabarozzi, Paolo Parenti, Andrea Dal Prete and Marta Gandolla
pp. 2327 - 2336
Research story telling: using the research journey map to communicate information, data, systems, and artifacts
Jonathan Cagan
pp. 2337 - 2342
Crisis: a driver for tourism innovation and service design?
Åsa Ericson, Johan Lugnet, Maria Ek Styvén and Thomas Zobel
pp. 2343 - 2352
Characterising the low-tech approach through a value-driven model
Alexandre Gaultier, Cédric Masclet and Jean-François Boujut
pp. 2353 - 2362
The connection between impressions, user experience and design specifications in technology-driven products
Fatma Nur Gokdeniz Zeynali and Ekrem Cem Alppay
pp. 2363 - 2372
Empathic empowerment: an exploration and analysis of a situated interaction through empathic modelling and role-play
Amy Grech, Andrew Wodehouse and Ross Brisco
pp. 2373 - 2382
Territorial design: ethological design or political design or both?
Stéphanie Hémon and Annie Gentès
pp. 2383 - 2394
Empowering design literacy: a toolkit for promoting the design of positive experiences through rules of thumb
Björn Kokoschko and Martin Wiesner
pp. 2395 - 2404
Into the wonder - exploring the design of playables
Jesper Falck Legaard
pp. 2405 - 2412
The aesthetics of robot design: towards a classification of morphologies
Dean Aaron Ollah Mobed, Andrew Wodehouse and Anja Maier
pp. 2413 - 2422
User involvement in the design of complex digital tools for employees in a large organisation
Anya Petyaeva, Joy Goodman-Deane and P. John Clarkson
pp. 2423 - 2432
Analyzing the dimensional aspects of 3D volumetric spaces: a product-oriented perspective
Vighneshkumar Rana and Vishal Singh
pp. 2433 - 2442
Demystifying the design process of demonstrators: contextual inquiry of two cases
Aleksandra Sviridova and Jouke Casper Verlinden
pp. 2443 - 2452
Unveiling key user experience issues to facilitate user-centred design of inertial motion capture systems
Charu Tripathi, Manish Arora and Amaresh Chakrabarti
pp. 2453 - 2462
The balance between a usable and emotional product design - a comparison of different methods for prioritising relevant influencing factors
Judith van Remmen, Dennis Horber, Jonas Händel, Jörg Miehling and Sandro Wartzack
pp. 2463 - 2472
Exploring the barriers to innovation adoption in the UK construction industry
K-M White and P. John Clarkson
pp. 2473 - 2482
Addressing cultural inertias for co-design: exploring Chinese participants’ perceptions of design games
Ziheng Zhang, Rui Patricio, Tengjia Zuo, Wa An and Ruoqing Huang
pp. 2483 - 2492
Industrial Design
Justice-Embedded Requirements Engineering (JERE) for system design
Bettina K. Arkhurst and Katherine Fu
pp. 2493 - 2502
Product changes from various viewpoints along the product lifecycle - an empirical study
Julia Beibl and Dieter Krause
pp. 2503 - 2512
Supporting modular product family representations by methodically utilising meta-models
Markus Christian Berschik, Fabian Niklas Laukotka, Marc Züfle and Dieter Krause
pp. 2513 - 2522
Systems engineering in design practice: a guideline for development service providers
Maximilian Burkhardt, Tilman Warns, Sebastian Endepols, Nikola Bursac and Katharina Ritzer
pp. 2523 - 2532
Leveraging design thinking in MBSE: mitigating data and information uncertainties - an integration model approach
Emir Gadzo, Marvin Michalides and Alexander Koch
pp. 2533 - 2544
Tailored metrics for assessing the quality of MBSE models
Iris Graessler, Dominik Wiechel, Deniz Oezcan and Patrick Taplick
pp. 2545 - 2554
A matrix-based approach to step-wise assess the safety of collaborative robots in manufacturing
Matthias R. Guertler, Philipp Bauer and Alan Burden
pp. 2555 - 2564
Principles for the design of system of systems exemplified using modularisation
Matthias Günther, Tobias Seidenberg, Harald Anacker and Roman Dumitrescu
pp. 2565 - 2574
Service centric design methodology for integrated robot-infrastructure systems
Abhishek Gupta and Dietmar Göhlich
pp. 2575 - 2584
Towards an ontology to capture human attributes in human-robot collaboration
Stephanie Hall, Mandeep Dhanda and Vimal Dhokia
pp. 2585 - 2594
A proposed framework using systems engineering to design human-centric manufacturing systems for novel products to reduce complexity and risk
Malin Hane Hagström and Dag Bergsjö
pp. 2595 - 2604
Utilization of the system architecture in the context of validation in the business-to-business (B2B) sector
Lynn Humpert, Daria Wilke, Sarah Brueggemann, Harald Anacker and Roman Dumitrescu
pp. 2605 - 2614
Tool support for implementing a methodology in magnet development projects at CERN
Jens Kaeske, Erik Wagner, Albert Albers and Stephan Russenschuck
pp. 2615 - 2624
AI-based analysis and linking of technical and organisational data using graph models as a basis for decision-making in systems engineering
Sebastian Katzung, Hüseyin Cinkaya, Umut Volkan Kizgin, Alexander Savinov, Julian Baschin and Thomas Vietor
pp. 2625 - 2634
Variability in complex product/system design: case study in automotive industry
José Lameh, Alexandra Dubray and Marija Jankovic
pp. 2635 - 2644
Supporting circular economy strategies for design of sustainable mechatronic systems using MBSE
Zvonimir Lipšinić, Stephan Husung, Neven Pavković and Christian Weber
pp. 2645 - 2654
A tradespace exploration approach for changeability assessment from a system-of-systems perspective: application from the construction machinery industry
Raj Jiten Machchhar, Carl Nils Konrad Toller Melén and Alessandro Bertoni
pp. 2655 - 2664
Reviewing the suitability of ICT-centered design methods for smart PSS development
Yevgeni Paliyenko, Daniel Roth and Matthias Kreimeyer
pp. 2665 - 2674
Exploring indicators of system-of-systems resilience: outcomes of a health systems design workshop at an international conference
Valeria Pannunzio, Alexander Komashie, Sebastian Walsh, Richard Milne, Timoleon Kipouros, Guillaume Lamé, Anja Maier, Carol Brayne and P. John Clarkson
pp. 2675 - 2684
Designing for systems-of-systems resilience: from the individual to the planet
Valeria Pannunzio, Timoleon Kipouros, Amber Khan, Laurie Friday, Carol Brayne and P. John Clarkson
pp. 2685 - 2694
Using product profiles for retrospective case studies in SGE - system generation engineering
Felix Pfaff, Michael Schlegel, Thomas Alexander Völk, Karl Thomas Reinheckel and Albert Albers
pp. 2695 - 2704
Bridging simulation granularity in system-of-systems: conjunct application of discrete element method and discrete event simulations in construction equipment design
Mubeen Ur Rehman, Raj Jiten Machchhar and Alessandro Bertoni
pp. 2705 - 2714
Design for robotic disassembly
Lykke Margot Ricard, Emilie Folkmann, Lars Carøe Sørensen, Sofie Bach Hybel, Roberto de Nóbrega and Henrik Gordon Petersen
pp. 2715 - 2724
Automatic derivation of use case diagrams from interrelated natural language requirements
Simon Schleifer, Adriana Lungu, Benjamin Kruse, Sebastiaan van Putten, Stefan Goetz and Sandro Wartzack
pp. 2725 - 2734
Investigation of advantages of models and the modelling process by introducing a model evaluation concept
Thomas Schumacher and David Inkermann
pp. 2735 - 2744
Enabling the design for circularity through circularity measures: breaking down the R-strategies into useful design measures
Marie Schwahn, Thomas Potinecke, Lukas Block, Maximilian Jakob Werner and Florian Stephan Tarlosy
pp. 2745 - 2754
Merging agent-based simulation and vehicle dynamics: a hybrid approach for value exploration in the mining industry
Carl Nils Konrad Toller Melén, Raj Jiten Machchhar and Alessandro Bertoni
pp. 2755 - 2764
Interdisciplinary system lifecycle management - a systematic literature review
Fabian Wyrwich, Aschot Kharatyan and Roman Dumitrescu
pp. 2765 - 2774
Systems Engineering and Design
Design for the real world: a problem-based learning approach
Shakuntala Acharya
pp. 2775 - 2784
Incorporating transition design in the education of an established design subject to empower design students with systems thinking
Qingfan An and Pedro Sanches
pp. 2785 - 2794
Approach of a virtual reality didactic toolkit - implementation and reflection
Hans-Patrick Balzerkiewitz, Carsten Stechert and David Inkermann
pp. 2795 - 2804
A gamified approach to assessing mental rotation in virtual reality
Kristin Alicia Bartlett, Almudena Palacios-Ibáñez and Jorge Dorribo Camba
pp. 2805 - 2814
“This is MY PhD project… or is it?” Understanding perceived doctoral project ownership through psychological ownership mapping
Michelle Rose Cedeno, Talya Porat and Weston Baxter
pp. 2815 - 2824
VR headset vs. PC screen as virtual learning tour interface for Chinese architecture heritage investigation
Yuetong Chen and Min Hua
pp. 2825 - 2834
Conceptualization of an artificial intelligence-assisted tutoring system for teaching technical drawing skills to undergraduate students
Jonas Fastabend, Benedikt Müller, Daniel Roth and Matthias Kreimeyer
pp. 2835 - 2844
Understanding the art of design thinking facilitation: a novel instrument for observing instructional strategies used by facilitators
Sharon Guaman-Quintanilla, Isabel Alcivar and Katherine Chiluiza
pp. 2845 - 2854
Towards simulation games in engineering design education - design and evaluation of a SE simulation game
David Inkermann and Theresa Ammersdörfer
pp. 2855 - 2864
Gaps between reflection frameworks and students’ practice: implications for design education
Akira Ito, Yuki Taoka, Echo Wan, Malak Sadek, Celine Mougenot and Shigeki Saito
pp. 2865 - 2874
Improving knowledge transfers in student engineering teams through the application of the InKTI - Interdepartmental Knowledge Transfer Improvement method
Monika Klippert, Robert Stolpmann and Albert Albers
pp. 2875 - 2884
Engineering design education at German universities: potential for a common basis to create personalized e-learning content
Frederike Kossack and Beate Bender
pp. 2885 - 2894
The sustainability and social entrepreneurship fellowship: transdisciplinary and multicultural problem-based engineering education
Gordon Krauss, Chris Rennick, Nadine Ibrahim and Sanjeev Bedi
pp. 2895 - 2904
Descriptive study of the integration of sustainability through the doughnut in an engineering training material
Alexis Lalevée, Claudine Gillot, Nadège Troussier and Eric Blanco
pp. 2905 - 2914
Challenges in design methods: perspectives of design students
Mayank Mayookh and V. Srinivasan
pp. 2915 - 2924
Students’ perception of risks in computer-supported collaborative design teams
Beth Morman and Ross Brisco
pp. 2925 - 2934
Fostering innovation through bio-inspired projects in engineering design education
Jacquelyn Nagel and Ramana Pidaparti
pp. 2935 - 2942
Learning in a digital fabrication course on building tangible artefacts
Vijayakumar Nanjappan, Georgi V. Georgiev, Hernan Casakin and Sohail Ahmed Soomro
pp. 2943 - 2952
A generative toolkit to help raise industrial design students’ awareness of low metal recycling rates
Konrad Schoch, Fabian Hemmert and Christa Liedtke
pp. 2953 - 2962
Analysis of collaborative CAD user actions in design sprint: insights from an educational setting
Jelena Šklebar, Tomislav Martinec, Stanko Škec and Mario Štorga
pp. 2963 - 2972
Bridging the green talent gap: a case study of product design education
Bernd Michael Weiss, Mohamed Elnourani, Didunoluwa Obilanade, Anna Öhrwall Rönnbäck and Arjoo Arjoo
pp. 2973 - 2982
Proposing an SDGs education model: integrating design thinking and behavioral science “nudges” for high school students
Yanfang Zhang, Leon Loh, Moe Shimomura and Noriko Takano
pp. 2983 - 2992
Design Education
A review of hydraulic energy harvester designs - current practice and future improvements
Lorenzo Giunta, James Roscow and Jingqi Liu
pp. 2993 - 3002
Challenges in product variant costing - a case study
Morten Nørgaard, Jakob Meinertz Grønvald, Carsten Keinicke Fjord Christensen and Niels Henrik Mortensen
pp. 3003 - 3012
Optimization of the potting design using an approach for load path optimized designs of sandwich structures
Johann Schellhorn, Lukas Schwan and Dieter Krause
pp. 3013 - 3022
Approaches for exploration, analysis, and visualization of tradespace for engineering decision-making
Meredith Sutton, Julia Daniels, Nafiseh Masoudi, David Gorsich and Cameron Turner
pp. 3023 - 3032
Approaches to reducing gear mass and their effects on gearing stresses and deformations
Dorian Vlašićek, Daniel Miler, Robert Mašović and Dragan Žeželj
pp. 3033 - 3040
Computing solution spaces for gear box design
Klara Ziegler, Kutay Demir, Thomas Luft, Thomas Mucks, Marius Fürst, Michael Otto, Karsten Stahl, Birgit Vogel-Heuser and Markus Zimmermann
pp. 3041 - 3050
