Hostname: page-component-848d4c4894-sjtt6 Total loading time: 0 Render date: 2024-06-26T19:26:34.006Z Has data issue: false hasContentIssue false
  • English
  • Français

Wear Resistance and Mechanical Properties of Polymeric Fibers Filled with Inorganic Fillers

Published online by Cambridge University Press:  26 February 2011

Toshihira Irisawa ,
Masatoshi Shioya ,
Haruki Kobayashi  and
Junichi Kaneko
Toshihira Irisawa
Affiliation:
tirisawa@o.cc.titech.ac.jp, Tokyo Institute of Technology, Department of Polymeric materials, 2-12-1 Ookayama,Meguro-ku, Tokyo, 152-8550, Japan
Masatoshi Shioya
Affiliation:
shioya.m.aa@m.titech.ac.jph.ac.jp, Tokyo Institute of Technology, Tokyo, 152-8550, Japan
Haruki Kobayashi
Affiliation:
haruki@o.cc.titech.ac.jp, Tokyo Institute of Technology, Tokyo, 152-8550, Japan
Junichi Kaneko
Affiliation:
jkaneko@felt.co.jp, Nippon Felt Co.,Ltd., Saitama, 115-0055, Japan
Get access

Abstract

The wear resistance and the mechanical properties of polymer matrix composite fibers filled with inorganic fillers have been investigated in order to find out the way to increase the wear resistance of the fibers without losing tensile modulus and strength. Nylon 6 and poly(ethylene terephthalate) have been used as the matrix polymer and aluminum borate whisker and carbon nanotube have been used as the fillers. The wear resistance of the fibers has been evaluated by observing the fiber cross section after the side of the fiber was worn using a rotating drum covered with abrasive paper. The wear resistance of the nylon 6 and PET fibers was increased by the addition of these fillers without the loss of tensile modulus and strength. The effects of the addition of the fillers on the wear resistance have been compared with the effects of stretching and heat treatment of the fibers.

Keywords

compositefiberpolymer
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 977: Symposium FF – Processing-Structure-Mechanical Property Relations in Composite Materials , 2006 , 977-FF12-06
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Tanaka, K., Sen'i Gakkaishi 31, 324 (1975)Google Scholar
2. Lancaster, J.K., J.Appl.Phrs 1, 549 (1968)Google Scholar
3. Giltrow, J.P., wear 18, 359 (1970)10.1016/0043-1648(70)90102-XGoogle Scholar
4. Friedrich, K., Reinicke, R., Zhang, Z., J.Engineering Tribology 216, 415 (2002)Google Scholar
5. Liu, C., Ren, L., Arnell, R.D., Tong, J., wear 225–229, 199 (1999)Google Scholar
6. Hoseini, M., Lausmaa, J., Boldizar, A., J.Biomedical Materials 6, 634 (2002)Google Scholar
7. Cai, H., Yan, F., Xue, Q., Materials Science and Engineering A364, 94 (2004)Google Scholar
8. Yang, Z., Dong, B, Huang, Y., Materials Chemistry and Physics 94, 109 (2005)Google Scholar
9. Enomoto, K., Yasuhara, T., Ohtake, N., New Diamond and Frontier Carbon Technology 14, 11 (2004)Google Scholar
10. Bijwe, J., Tewari, U.S., J.Materials Science 25, 548 (1990)10.1007/BF00714072Google Scholar
11. Tong, J., Ma, Y., Jiang, M., Wear 255, 734 (2003)10.1016/S0043-1648(03)00221-7Google Scholar