Hostname: page-component-8448b6f56d-c4f8m Total loading time: 0 Render date: 2024-04-20T01:05:42.694Z Has data issue: false hasContentIssue false
  • English
  • Français

VHF Coaxial Helix Plasma Source for a-Si:H

Published online by Cambridge University Press:  16 February 2011

U. Stephan ,
J. Kuske  and
K. Schade
U. Stephan
Affiliation:
Institut für Festkörperelektronik, Technische Universität Dresden Mommsenstraβe 13, 01062 Dresden, F.R. Germany
J. Kuske
Affiliation:
Institut für Festkörperelektronik, Technische Universität Dresden Mommsenstraβe 13, 01062 Dresden, F.R. Germany
K. Schade
Affiliation:
Institut für Festkörperelektronik, Technische Universität Dresden Mommsenstraβe 13, 01062 Dresden, F.R. Germany
Get access

Abstract

Coaxial helical resonators are used in the field of high frequency engineering for narrow band selection of signals from about 10 MHz to 500 MHz (VHF and low UHF range) [1, 2]. Their favorable geometric construction suggests their utilization as plasma source for etching and deposition of a-Si:H at frequencies between 30 and 200 MHz - an additional, but still unusual application.

The resonator consists of a cylindric outer conductor, which is closed on one side by a bottom plate, and a rotationally symmetrical inner conductor of spiral form (helix) Measuring γ/4. One end of the helix is grounded to the bottom plate (short circuit), the other end is open (open circuit). Power supply is feasible either galvanically by connecting to the helix or inductively by means of a coupling coil. Applying a suitable coupling factor allows operation at resonance without matchbox. The plasma is generated within the resonator and above its open end, which can be adjusted to special conditions of application with the aid of several grids. In contrast to the source commonly used, the coaxial helix plasma source has proved advantageous with regard to simple design, easy mounting, Minimal outer electrical equipment, no dependence of generated plasma on substrate measures, good breakdown and discharge behavior, low supply voltage (some tens of volts), high power density, and, due to a discharge occurring without filament, also to life durability and no thermally generated particle emission. The application of very high frequencies leads to a low ion bombardment intensity of a-Si:H, and thus additional magnetic fields are not necessary.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 336: Symposium A – Amorphous Silicon Technology - 1994 , 1994 , 79
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Macalpine, W. W. and Schildknecht, R. O., Proceedings of the IRE, 2099 (1959).Google Scholar
[2] Zverev, A. I. and Blinchikoff, H. J., IRE Transactions on component parts 3, 99 (1961).Google Scholar
[3] Steinberg, George N. and Reinberg, Alan R., U.S. Patent No. 4368092 (11 January 1983).Google Scholar
[4] Flamm, Daniel L., Ibbotson, Dale E. and Johnson, Wayne L., U.S Patent No. 4918031 (17 April 1990).Google Scholar
[5] Barnes, Michael S., Coultas, Dennis K., Forster, John G. and Keller, John H., U.S. Patent No. 5241245 (31 August 1993).Google Scholar
[6] Stephan, U., Kuske, J., Schade, K. and Fuhs, W., Proceedings of the XXI. International Conference on Phenomena in Ionized Gases, (19–24 September 1993, Bochum, F.R. Germany) pp. 115–116.Google Scholar
[7] A New Generation of RF Excited Ion Sources, Nordiko Limited, Brockhampton Lane, Havant Hampshire, P09 1SR, UK.Google Scholar
[8] Freisinger, J., Krempel-Hess, J., Krumeich, J., Lob, H., Münz, W. D. and Scharmann, A., The RF-Ion Source Pris 10, University Of Giessen (1St Inst, Of Physics, Germany), Hauzer Techno Coating Europe Bv (The Netherlands).Google Scholar
[9] ECR sources, Roth & Rau Oberflächentechnik GMbH, Str. der Einheit 21, D-09358 Wüstenbrand, FRG.Google Scholar