Hostname: page-component-8448b6f56d-jr42d Total loading time: 0 Render date: 2024-04-19T14:41:07.900Z Has data issue: false hasContentIssue false

Transmission Electron Microscopy Study In-Situ of Radiation-Induced Defects in Copper at Elevated Temperatures

Published online by Cambridge University Press:  15 February 2011

T. L. Daulton
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne IL, 60439.
M. A. Kirk
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne IL, 60439.
L. E. Rehn
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne IL, 60439.
Get access

Abstract

Neutrons and high-energy ions incident upon a solid can initiate a displacement collision cascade of lattice atoms resulting in localized regions within the solid containing a high concentration of interstitial and vacancy point defects. These point defects can collapse into various types of dislocation loops and stacking fault tetrahedra (SFT) large enough that their lattice strain fields are visible under diffraction-contrast imaging using a Transmission Electron Microscope (TEM). The basic mechanisms driving the collapse of point defects produced in collision cascades is investigated in situ with TEM for fcc-Cu irradiated with heavy (100 keV Kr) ions at elevated temperature. The isothermal stability of these clusters is also examined in situ.

Areal defect yields were observed to decrease abruptly for temperatures greater than 300°C. This decrease in defect yield is attributed to a proportional decrease in the probability of collapse of point defects into clusters. The evolution of the defect density under isothermal conditions appears to be influenced by three different rate processes active in the decline of the total defect density. These rate constants can be attributed to differences in the stability of various types of defect clusters and to different loss mechanisms. Based upon observed stabilities, estimations for the average binding enthalpies of vacancies to SFT are calculated for copper.

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Allen, C. W., Funk, L. L., and Ryan, E. A., Mat. Res. Soc. Symp. Proc., 396, 641646 (1996).Google Scholar
2. Sekimura, N., Yamanaka, Y., Ishino, S., 14th International Symposium on Effects of Radiation on Materials, ASTM STP 1046, 1, 596608 (1990).Google Scholar
3. Ishino, S., Sekimura, N., Hirooka, K., and Muroga, T., J. Nucl. Mater., 141–143, 776780 (1986).Google Scholar
4. Vetrano, J. S., Robertson, I. M., and Kirk, M. A., Scripta Met., 24, 157162 (1990).Google Scholar
5. Jenkins, M. L., Kirk, M. A., and Phythian, W. J., J. Nucl. Mater., 205, 1630 (1993).Google Scholar
6. Vetrano, J. S., Bench, M. W., Robertson, I. M., and Kirk, M. A., Metal. Trans. A, 20A, 26732680 (1989).Google Scholar
7. Jenkins, M. L., J. Nucl. Mater., 216, 124156 (1994).Google Scholar
8. Sakaida, H., Sekimura, N., and Ishino, S., J. Nucl. Mater., 179–181, 928930 (1991).Google Scholar
9. English, C. A., Eyre, B. L., and Summers, J., Phil. Mag., 34, 603614 (1976).Google Scholar