Hostname: page-component-8448b6f56d-qsmjn Total loading time: 0 Render date: 2024-04-19T21:24:59.037Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermodynamic Considerations in Thin-Film Metallizations

Published online by Cambridge University Press:  22 February 2011

Robert Beyers
Robert Beyers*
Affiliation:
Department of Materials Science and Engineering, Stanford University Stanford, California 94305
Get access

Abstract

The drive to produce smaller devices in integrated circuits is wellknown. Concurrent with this drive is the need to incorporate new materials, such as silicides, as interconnects, diffusion barriers, and contacts. During circuit fabrication, these materials are in contact with other solids and gases at elevated temperatures. Consequently, reactions may occur which degrade the materials present. Since the reactions of interest typically involve three elements distributed in several phases, ternary phase diagrams are required to predict the occurrence of a reaction and the subsequent reaction products, or, conversely, the stability of the phases present. Hence, ternary diagrams can provide important guidance in the selection of optimal materials and the design of reliable processing schedules.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 47: Symposium C – Thin Films: The Relationship of Structure to Properties , 1985 , 143
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Beyers, R., Sinclair, R., and Thomas, M. E., J. Vac. Sci. Technol. B 2, 781 (1984) © 1984 American Institute of Physics.Google Scholar
2. Beyers, R., J. Appl. Phys. 56, 147 (1984) © 1984 American Institute of Physics.Google Scholar
3. Kim, J., J. Electron. Mater. 13, 191 (1984).Google Scholar
4. Ho, P. S., Lewis, J. E., and Koster, U., in VLSI Science and Technology/1982, edited by Dell'Oca, C. J. and Bullis, W. M. (The Electrochemical Society, Princeton, N.J. 1982), p. 255.Google Scholar
5. Barin, I. and Knacke, O., Thermochemical Properties of Inorganic Substances (Springer, Berlin, 1973 and 1977).Google Scholar
6. Brewer, L. and Krikorian, O., J. Electrochem. Soc. 103, 38 (1956).Google Scholar
7. Krautle, H., Nicolet, M. A., and Mayer, J. W., Phys.Status Solidi A 20, K33 (1973).Google Scholar
8. Maa, J. S., Lin, C. J., and Liu, J. H., Thin Solid Films 64, 439 (1979).Google Scholar
9. Ting, C. Y., Wittmer, M., Iyer, S. S., and Bodsky, S. B., in VLSI Science and Technology/1984, edited by Bean, K. E. and Rozgonyl, G. A. (The Electrochemical Society, Princeton, N. J., 1984), p. 397.Google Scholar
10. Wittmer, M., J. Appl. Phys. 53, 1007 (1982).CrossRefGoogle Scholar
11. Norstrom, H., Donchev, T., Ustling, M., and Peterson, C. S., Phys. Scr. 28, 633 (1984).CrossRefGoogle Scholar
12. Cros, A., Pollak, R. A., and Tu, K. N., J. Appl. Phys. 54, 258 (1983).CrossRefGoogle Scholar
13. Pretorius, R., Harris, J. M., and Nicolet, M. A., Solid-State Electron, 21, 667 (1978).Google Scholar
14. Beyers, R., Sinclair, R., and Thomas, M. E., Mat. Res. Soc. Symp. Proc. 14, 423 (1983).CrossRefGoogle Scholar
15. Zirinsky, S., Hammer, W., d'Heurle, F., and Baglin, J., Appl. Phys. Lett. 33, 76 (1978).Google Scholar
16. Mochizuki, T. and Kashiwagi, M., J. Electrochem. Soc. 127, 1128 (1980).Google Scholar
17. Saraswat, K. C., Nowicki, R. S., and Moulder, J. F., Appl Phys. Lett. 41, 1127 (1982).CrossRefGoogle Scholar
18. Murarka, S. P., Silicides for VLSI Applications (Academic Press, New York, 1983) p. 72.Google Scholar
19. Baglin, J. E. E., d'Heurle, F., and Peterson, C. S., J. Appl. Phys. 54, 1849 (1983).Google Scholar
20. Chen, J. R., Houng, M. P., Hsiung, S. K., and Liu, Y. C., Appl. Phys. Lett. 37, 824 (1980).Google Scholar
21. d'Heurle, F., in VLSI Science and Technology/1982, edited by Dell'Oca, C. J. and Bullis, W. M. (The Electrochemical Society, Princeton, N.J., 1982) p. 194.Google Scholar
22. Wakita, A. S., Sigmon, T. W., and Gibbons, J. F., Appl. Phys. Lett. 45, 140 (1984).Google Scholar
23. d'Heurle, F., Irene, E. A., and Ting, C. Y., Appl. Phys. Lett. 42, 361 (1983).Google Scholar
24. Rosser, P. J. and Tomkins, G. J., Mat. Res. Soc. Symp. Proc. (1985) in press.Google Scholar
25. Beyers, R. and Sinclair, R., J. Appl. Phys. 57, 5240 (1985).Google Scholar