Hostname: page-component-76fb5796d-skm99 Total loading time: 0 Render date: 2024-04-26T22:20:54.734Z Has data issue: false hasContentIssue false
  • English
  • Français

Subcritical Crack Growth at a Polymer/Glass Interface

Published online by Cambridge University Press:  25 February 2011

J.E. Ritter ,
K. Conley ,
D. Steul  and
T.J. Lardner
J.E. Ritter
Affiliation:
Mechanical Engineering Dept., University of Massachusetts, Amherst, MA 01003
K. Conley
Affiliation:
Mechanical Engineering Dept., University of Massachusetts, Amherst, MA 01003
D. Steul
Affiliation:
Mechanical Engineering Dept., University of Massachusetts, Amherst, MA 01003
T.J. Lardner
Affiliation:
Mechanical Engineering Dept., University of Massachusetts, Amherst, MA 01003
Get access

Abstract

Subcritical crack growth at polymer/glass interfaces can occur due to a stress dependent chemical reaction at the crack tip at a crack driving force less than the critical fracture energy for catastrophic crack propagation. A four—point flexure apparatus coupled with an inverted microscope allows observation in situ of the subcritical crack growth at the polymer/glass interface. The specimen consists of soda—lime glass plates bonded together with epoxy acrylate. In the four—point flexure test, the strain energy release rate is independent of the interfacial crack length. This test technique allows for subcritical crack growth at the polymer/glass interface to be measured as a function of the applied crack driving force and relative humidity. The results are discussed in terms of a fracture mechanics model.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 203: Symposium D – Electronic Packaging Materials Science V , 1990 , 47
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ritter, J.E., Lardner, T.J., Rosenfeld, L., Lin, M.R., J. Appl. Phys. 66 (8), 3626–34, (1989).Google Scholar
2. Rosenfield, L.G., Ritter, J.E., Lardner, T.J., Lin, M.R., J. Appl. Phys. 67 (7), 3291–96, (1990).Google Scholar
3. Cao, H.C., Dalgleish, B.J., Evans, A.G., Closed Loop, 17, 18, (1989).Google Scholar
4. Oh, T.S., Cannon, R.M., Ritchie, R.O, J. Am. Ceram. Soc., 70 (12) C352–55,(1987).Google Scholar
5. Kinloch, A.J., Adhesion and Adhesive, Chapman and Hall, London (1987), p392.Google Scholar
6. Thouless, M.D., Cao, H.C., Mataga, P.A., J. Mat. Sci., 24, 1406–12, (1989).Google Scholar
7. Freiman, S.W., Am. Ceram. Soc. Bull., 67 (2), 392–402 (1988).Google Scholar
8. Kirloskar, M.A., Donovan, J.A., Polymer Eng. and Sci., 27 (2), 124–30, (1987).Google Scholar
9. Evans, A.G., Dalgleish, B.J., He, M., Hutchinson, J.W., Acta Metall., 37 (12) 3249–54 (1989).Google Scholar