Hostname: page-component-848d4c4894-2xdlg Total loading time: 0 Render date: 2024-06-24T02:08:55.709Z Has data issue: false hasContentIssue false
  • English
  • Français

A Study on the Responsivity of Four-Layer Pyroelectric Sensors

Published online by Cambridge University Press:  10 February 2011

Vladimir B. Samoilov ,
Seong Jun Kang ,
Dong Hoon Chang  and
Yung Sup Yoon
Vladimir B. Samoilov
Affiliation:
School of Electrical and Computer Engineering, Inha University, Inchon 402-751, Korea
Seong Jun Kang
Affiliation:
School of Electrical and Computer Engineering, Inha University, Inchon 402-751, Korea
Dong Hoon Chang
Affiliation:
School of Electrical and Computer Engineering, Inha University, Inchon 402-751, Korea
Yung Sup Yoon
Affiliation:
School of Electrical and Computer Engineering, Inha University, Inchon 402-751, Korea
Get access

Abstract

The temperature distribution under periodic thermal excitation and the pyroelectric response of a four-layer system consisting of front and back semi-infinite media, a pyroelectric element, and an intermediate layer are found. Numerical results and approximate expressions are obtained for special cases, such as a detector with an air gap between the pyroelectric layer and the bulk substrate and a detector on a substrate of finite thickness an air environment. The responsivities of detectors with a lead-lanthanum-titanate (PLT) sensing element on either a Si and a SiO2 substrate are calculated as functions of the pyroelectric layer and the underlying layer thicknesses. It is found that the detector with an air gap has a frequency-independent responsivity over a wide frequency range. A correlation is found between the type of frequency response in each frequency region and the corresponding dominant mechanism for heat loss.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 493: Symposium U – Ferroelectric Thin Film VI , 1997 , 487
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. van der Ziel, A., J. Appl. Phys. 44, 546 (1973).Google Scholar
2. Ye, C., Tamagawa, T., Lin, Y., and Polla, D. L., Ferroelectric Thin Films II, Mat. Res. Symp. Proc. 243, 51 (1992).Google Scholar
3. Bell, A., Huang, Y., Paul, O., Nemirovsky, Y., and Setter, N., Integrated Ferroelectrics 6, 231 (1995).Google Scholar
4. Choi, J. R., Lee, D. H., Nam, H. J., Cho, S. M., Lee, J. H., and Kim, K. Y., Intergrated Ferroelectrics 6, 241 (1995).Google Scholar
5. Cooper, J., Rev. Sei. Instrum. 33, 92 (1962).Google Scholar