Skip to main content Accessibility help
×
Home

Study on the Diamond Field Emitter Fabricated by Transfer Mold Technique

  • Byeong-Kwon Ju (a1), Seong-Jin Kim (a1), Jae-Hoon Jung (a1), Yun-Hi Lee (a1), Beom Soo Park (a1), Young-Joon Baik (a1), Sung-Kyoo Lim (a2) and Myung Hwan Oh (a1)...

Abstract

Strip-shaped diamond-tip field emitter array was fabricated by using the transfer mold technique. The sharp turn-on characteristic was observed from the current-voltage measurement of the fabricated diamond-tip field emitter array. The turn-on characteristic of the diamond-tip field emitter array was compared with that of a flat diamond film. High emission current density was obtained from the diamond-tip field emitter array. The threshold voltage of the diamond-tip field emitter array was lower than that of a flat diamond film.

Copyright

References

Hide All
[1] Geis, M. W., Efremow, N. N., Woodhouse, J. D., McAleese, M. D., Marchywka, M., Socker, D. G., and Hochedez, J. F., IEEE Electron Device Lett., 12, 456, (1991).
[2] Kang, W. P., Davidson, J. L., Li, Q., Xu, J. F., Kinser, D. L., and Kerns, D. V., The 8th Intl. Conf Solid-State Sensors and Actuators, and Eurosensors IX, 182, (1995).
[3] Nakamoto, M., Ichimura, K., Ono, T., and Nakamura, Y., IVMC'95 Tech. Dig., 186, (1995).
[4] Sokolich, M., Adler, E. A., Longo, R. T., Goebel, D. M., and R. T. Benton IEDM Tech. Dig., 159, (1990).

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed