Hostname: page-component-848d4c4894-xfwgj Total loading time: 0 Render date: 2024-06-21T22:37:23.140Z Has data issue: false hasContentIssue false
  • English
  • Français

Study of Fiber Matrix Interfaces in Metakaoline-Opc Blended Cement GRC Composites

Published online by Cambridge University Press:  21 February 2011

J. Ambroise ,
J. Dejean  and
J. Pera
J. Ambroise
Affiliation:
Laboratoire des Matériaux Minéraux, Bat. 307, INSA de Lyon (Institut National des Sciences Appliquees), 20, Avenue Albert Einstein, 69621- Villeurbanne Cedex, France
J. Dejean
Affiliation:
Laboratoire des Matériaux Minéraux, Bat. 307, INSA de Lyon (Institut National des Sciences Appliquees), 20, Avenue Albert Einstein, 69621- Villeurbanne Cedex, France
J. Pera
Affiliation:
Laboratoire des Matériaux Minéraux, Bat. 307, INSA de Lyon (Institut National des Sciences Appliquees), 20, Avenue Albert Einstein, 69621- Villeurbanne Cedex, France
Get access

Abstract

Ductility is one of the main requirements of a reliable building material; the traditional LOP and MOR criteria do not reveal this quality. Other criteria based on deflection, energy or bond-slip relationships are presented. They are applied to four very different series of composites: very brittle, very ductile, and intermediate. The results point out that only the criteria based on the flexural test up to splitting, at a constant deflection rate, can reveal the higher ductility of the metakaoline-OPC blended matrix associated with AR glass. From this test, the bond-slip relationship can be determined. This leads to the definition of a comparative parameter which describes the mechanical interfacial compatibility of the matrix versus the fibers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 114: Symposium R – Bonding in Cementitious Composites , 1987 , 175
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Majumdar, A. and Ryder, , Glass Technology, Vol. No. 3, pp. 78–84 (1968).Google Scholar
2. Moore, in Proceedings 3rd Intern. Conference on Durability of Building Materials, Vol.1, pp. 240–247, Espoo, 1984.Google Scholar
3. Ambroise, J., Pera, J. and Murat, M., in Proceedings 8th Intern. Congress on the Chemistry of Cements, Rio de Janeiro, Vol. VI, pp. 364–370, 1986.Google Scholar
4. Ambroise, J., Dejean, J., Foumbi, and Pera, J., in Proceedings 6th GRCA Congress, Edinburgh 87, to be published.Google Scholar
5. Diamond, S., in Proceedings Durability of Glass Fiber Reinforced Concrete Symposium, edited by Diamond, S., Chicago 1985, pp. 199–209.Google Scholar