Hostname: page-component-8448b6f56d-wq2xx Total loading time: 0 Render date: 2024-04-19T04:55:07.867Z Has data issue: false hasContentIssue false

Stability of GaAs/Si Superlattices During MBE Growth and Post-Growth Annealing

Published online by Cambridge University Press:  21 February 2011

J.K. Wade
Affiliation:
Materials Science Program, University of Wisconsin, Madison, WI 53706
P.D. Moran
Affiliation:
Materials Science Program, University of Wisconsin, Madison, WI 53706
H.J. Gillespie
Affiliation:
Materials Science Program, University of Wisconsin, Madison, WI 53706
G.E. Crook
Affiliation:
Dept. of Electrical and Computer Engineering, University of Wisconsin, Madison, WI 53706
R.J. Matyi
Affiliation:
Dept. of Materials Science and Engineering, University of Wisconsin, Madison, WI 53706
Get access

Abstract

The stability of GaAs/Si superlattices grown on GaAs substrates using molecular beam epitaxy is described. Typical superlattice structures consisted of ten periods of thin (less than 6.5Å thick) layers of pseudomorphic silicon alternating with thick GaAs layers. We have examined the As2/Ga flux conditions required for the growth of high quality superlattices and have found that the structural perfection is extremely sensitive to the V/III flux ratio. The best superlattices were grown under condition that were just barely enough arsenic to produce a stable (2×4) surface reconstruction in the GaAs layers; increases in the arsenic overpressure resulted in a progressive trend towards 3-D growth of the GaAs on the pseudomorphic Si. In addition, we have examined the stability of GaAs/Si superlattices towards post-growth annealing. Double crystal x-ray diffraction scans showed little change in superlattice structure following rapid thermal anneals at 800°C; at 900°C, however, all but the first order satellite reflections disappeared. We attribute this behavior to the relaxation of pseudomorphic strin and the generation of misfit dislocations at the higher anneal temperature.

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Bratina, G., Sorba, L., Antonini, A., Biasiol, G. and Franciosi, A., Phys.Rev. B, 45, (1991).Google Scholar
2 Jenkins, D.W., Newman, K.E. and Dow, J.D., Phys. Rev. B., 32, 4034 (1985).Google Scholar
3 Gillespie, , H.J.; Crook, , G.E.; and Matyi, , R.J., Appl. Phys. Lett., 60, 721 (1992).Google Scholar
4 Gillespie, , H.J.; Wade, , J.K.; Crook, , G.E. and Matyi, , R.J., J. Appl. Phys., 73, 95 (1993).Google Scholar
5 Sorba, L., Bratina, G., Franciosi, A., Tapfer, L., Scamarcio, G., Spagnolo, V. and Molinari, E., Appl. Phys. Lett., 61, 1570 (1992)Google Scholar
6 Liu, D.G., Fan, J.C., Lee, C.P., Tsai, C.M., Chang, K.H., Liou, D.C., Lee, T.L. and Chen, L.J., Appl. Phys. Lett., 60, 2628 (1992).Google Scholar
7 Lee, H.C., Asano, T., Ishiwara, H. and Furukawa, S., Jpn. J. Appl. Phys., 25, L595 (1986).Google Scholar
8 Matyi, , R.J., Rev. Sci. Instr. 63, 5591 (1992).Google Scholar
9 RADS Version 1.32, available from Bede Scientific, Durham, UK.Google Scholar
10 Holloway, H., J. Appl. Phys., 67, 6229 (1990).Google Scholar