Hostname: page-component-84b7d79bbc-g5fl4 Total loading time: 0 Render date: 2024-07-30T05:20:26.538Z Has data issue: false hasContentIssue false
  • English
  • Français

Sol-Gel Processing of Lithium Niobate Thin-Layers on Silicon

Published online by Cambridge University Press:  25 February 2011

Dennis J. Eichorst  and
D. A. Payne
Dennis J. Eichorst
Affiliation:
Department of Materials Science and Engineering, and The Center for Compound Semiconductor Microelectronics, University of Illinois at Urbana-Champaign, 105 S. Goodwin Avenue, Urbana, IL 61801
D. A. Payne
Affiliation:
Department of Materials Science and Engineering, and The Center for Compound Semiconductor Microelectronics, University of Illinois at Urbana-Champaign, 105 S. Goodwin Avenue, Urbana, IL 61801
Get access

Abstract

Sol-gel processing was used for the fabrication of LiNbO3 thin-layers on semiconductors. Two different alkoxide systems were investigated (i.e., ethoxide vs. methoxyethoxide) to determine the role of solution chemistry on the evolution of structure in LiNbO3 layers. An alcohol exchange reaction, which produced lithium niobium methoxyethoxide, proved advantageous with respect to the amount of hydrolysis water content which could be added to give stable solutions. Spin-casting was used for the deposition of thin-layers which crystallized at 500 C on Si. The refractive index of sol-gel derived LiNbO3 was determined to be similar to sputtered or epitaxially grown films. Data are reported for the processing route and the material characteristics. Methoxyethanol based systems appeared to be more forgiving than ethanol based solutions for the fabrication of high-quality thin-layer devices.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 121: Symposium H – Better Ceramics Through Chemistry III , 1988 , 773
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Yanovskaya, M. I., et al., Inorg. Mater. 21, 1226 (1985).Google Scholar
2. Balbaa, S. and Gowda, G., Mater, J.. Sci. Lett. 5, 751 (1986).CrossRefGoogle Scholar
3. Partlow, D. P. and Greggi, J., J. Mater. Res. 2 595 (1987).CrossRefGoogle Scholar
4. Hirano, S., Personal Communication (1988).Google Scholar
5. Bradley, D. C., Chakravarti, B. N., and Wardlaw, W., J. Chem. Soc. 1956, 2381.CrossRefGoogle Scholar
6. Budd, K. D., Dey, S. K., and Payne, D. A. in Better Ceramics Through Chemistry II, edited by Brinker, C. J., Clark, D. E., and Ulrich, D. R. (Mater. Res. Soc. Proc, Vol. 73, Pittsburgh, PA 1986) pp. 711–716.Google Scholar
7. Meek, P. R., Holland, L. and Townsend, P. D., Thin Solid Films 141, 251 (1986).CrossRefGoogle Scholar
8. Baudrant, A., Vial, H., and Daval, J., Mater. Res. Bull. 10, 1373 (1975).CrossRefGoogle Scholar