Hostname: page-component-848d4c4894-v5vhk Total loading time: 0 Render date: 2024-06-20T16:06:07.413Z Has data issue: false hasContentIssue false
  • English
  • Français

Single-Walled Carbon Nanotube Rope for Gas Sensor Application

Published online by Cambridge University Press:  01 February 2011

J. W. Lee ,
Y. M. Choi ,
K. J. Kong ,
H. J. Chang  and
B. H. Ryu
J. W. Lee
Affiliation:
Advanced materials division, Korea Research Institute of Chemical Technology, Jangdong 100, Yuseong, Daejeon 305–600, Korea
Y. M. Choi
Affiliation:
Advanced materials division, Korea Research Institute of Chemical Technology, Jangdong 100, Yuseong, Daejeon 305–600, Korea
K. J. Kong
Affiliation:
Advanced materials division, Korea Research Institute of Chemical Technology, Jangdong 100, Yuseong, Daejeon 305–600, Korea
H. J. Chang
Affiliation:
Advanced materials division, Korea Research Institute of Chemical Technology, Jangdong 100, Yuseong, Daejeon 305–600, Korea
B. H. Ryu
Affiliation:
Advanced materials division, Korea Research Institute of Chemical Technology, Jangdong 100, Yuseong, Daejeon 305–600, Korea
Get access

Abstract

A chemical gas sensor with a novel pad pattern applicable to NH3, NO2, and H2 gas was developed based on single-walled carbon nanotube ropes. In this pattern named BCE (Barricade confronting electrode), several electrodes were located at the circumference of a sample and each pair of electrode tips was designed to confront to each other with a narrow interval. Several single-walled carbon nanotubes were shifted to the interval by the centrifugal force generated through the rapid rotation of a sample equipped on the spinner. Our device showed improved performance for NO2, NH3, and H2 gases compared with others in references.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 788: Symposium L – Continuous Nanophase and Nanostructured Materials , 2003 , L4.4
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kong, J., Franklin, N. R., Zhou, C., Chapline, M. G., Peng, S., Cho, K., Dai, H., Science 287, 622 (2000).Google Scholar
2. Li, J., Lu, Y., Ye, Q., Cinke, M., Han, J., Meyyappan, M., Nano Lett. 3, 929 (2003).Google Scholar
3. Cantalini, C., Valentini, L., Lozzi, L., Armentano, I., Kenny, J. M., Santucci, S., Sens. Actuators B. 93, 333 (2003).Google Scholar
4. Ong, K. G., Zeng, K., Grimes, C. A., IEEE Sensors Journal 2, 82 (2002).Google Scholar
5. Currie, J. F., Essalik, A., Marusic, J. C., Sens. Actuators B. 59, 235 (1999).Google Scholar
6. Xu, C. N., Miura, N., Ishida, Y., Matsuda, K., Yamazoe, N., Sens. Actuators B. 65, 163 (2000).Google Scholar
7. Bienfait, M., Asmussen, B., Johnson, M., Zeppenfeld, P., Surf. Sci. 460, 243 (2000).Google Scholar
8. Someya, T., Small, J., Kim, P., Nuckolls, C., Yardley, J. T., Nano Lett. 3, 877 (2003).Google Scholar
9. Wong, Y. M., Kang, W. P., Davidson, J. L., Wisitsora-at, A., Soh, K. L., Sens. Actuators B. 93, 327 (2003).Google Scholar
10. Varghese, O. K., Gong, D., Paulose, M., Ong, K. G., Grimes, C. A., Sens. Actuators B. 93, 338 (2003).Google Scholar
11. Krupke, R., Hennrich, F., Löhneysen, H. v., Kappes, M. M., Science 301, 344 (2003).Google Scholar