Hostname: page-component-8448b6f56d-jr42d Total loading time: 0 Render date: 2024-04-19T12:46:01.544Z Has data issue: false hasContentIssue false
  • English
  • Français

Removable External Seeding for Solid phase Epitaxy of Amorphous Silicon on Glass Substrates

Published online by Cambridge University Press:  21 February 2011

Atsutoshi Doi ,
Takanori Tsuda ,
Masa-ICHI Kumikawa ,
Yoshiyuki Nakamizo  and
Kazuyuki Ueda
Atsutoshi Doi
Affiliation:
Dept. of Electrical Engineering, Kinki University, Higashi-Osaka, Osaka 577, Japan
Takanori Tsuda
Affiliation:
Dept. of Electrical Engineering, Kinki University, Higashi-Osaka, Osaka 577, Japan
Masa-ICHI Kumikawa
Affiliation:
Electronic Devices Division, Ricoh Co., Ltd., 13–1, Himemurocho, Ikeda, Osaka 563, Japan
Yoshiyuki Nakamizo
Affiliation:
Central Research Laboratory, Hokuriku Electric Industry Co‥Ltd., Osawanomachi, Kaminiikawa, Toyama 939–22, Japan
Kazuyuki Ueda
Affiliation:
Dept. of Applied Physics, Osaka University, Suita, Osaka 565, Japan
Get access

Abstract

A new method for obtaining a planar silicon film on glass substrates (SOG) with controlled crystal orientation has been introduced. This technique uses solid phase epitaxy (SPE) with external seed to fabricate the orientation-controlled SOG structure. Heat treatment of amorphous SOG substrate in contact with mesa striped Si seed crystal was performed at 540°C for 16 hours to form the SPE layer. The planar surface of the SOG structure is due to the most important feature of the present technique-the separation of the seed from the substrate after SPE.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 237: Symposium Ca – Interface Dynamics and Growth , 1991 , 621
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Gat, A., Gerzberg, L., Gibbons, J. F., Magee, T. J., Peng, J., and Hong, J. D., Appl. Phys. Lett. 41, 775 (1978).Google Scholar
2. Colinge, J. P., and Demoulin, E., IEEE Electron Device Lett., EDL–2, 250 (1981).Google Scholar
3. Ohwada, J., Takabatake, M., Kawakami, H., Ono, Y. A., Konishi, N., Suzuki, T., and Miyata, K., Extended Abstract of 19th Conf. on Solid State Devices and Materials (The Japan Society of Applied Physics, Tokyo, 1987), p. 55.Google Scholar
4. Doi, A., Kumikawa, M., and Nakamizo, Y., Appl. Phys. Lett. (1991) to be published.Google Scholar
5. Koma, A., Extended Abstracts of 8th Int. Workshop on Future Electron Devices, March, 1990 (Research & Development Association for Future Electron Devices, Tokyo, 1990), p. 201.Google Scholar