Hostname: page-component-848d4c4894-mwx4w Total loading time: 0 Render date: 2024-06-17T00:10:44.844Z Has data issue: false hasContentIssue false
  • English
  • Français

Reliable Metallization and Wet Etch Process for Waveguide Formation on InP/InGaAs Mqw Modulator Structures

Published online by Cambridge University Press:  25 February 2011

Carsten Thirstrup  and
Thomas Clausen
Carsten Thirstrup
Affiliation:
Technical University of Denmark, Mikroelektronik Centret, Building 345 East, DK-2800 Lyngby, Denmark
Thomas Clausen
Affiliation:
Technical University of Denmark, Physics Department, Building 309, DK-2800 Lyngby, Denmark
Get access

Abstract

A simple process for making reliable InP/InGaAs multiple quantum well (MQW) modulator waveguide devices optimized with respect to electro-refractive modulation has been developed. The main concern of this study is the surface properties of the InP surface prior to metallization and etching. A new protective surface passivation technique combining vacuum procurement (∼5xl0-7 Torr) to reduce the water content in the native oxides with an in situ rf-sputter deposition of reactive SiOx onto the surface of InP is reported. This procedure provides smooth surfaces and good optical properties of GaInAs/InP based strip-loaded waveguides.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 337: Symposium B – Advanced Metallization for Devices and Circuits—Science, Technology and Manufacturing III , 1994 , 645
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Wilmsen, C., Ed., Physics and Chemistry of III-V Compound Semiconductor Interfaces. Plenum Press, New York (1985).Google Scholar
2 Thirstrup, C., Pang, S.W., Albrektsen, O., and Hanberg, J., J. Vac. Sci. Technol. B, 11, 1214 (1993).Google Scholar
3 Williams, R.E., GaAs Processing Techniques. (Artech House, Inc., US, 1984).Google Scholar
4 Uekusa, S. and Oogawa, K., J. Electrochem. Soc., 132, 671 (1985).Google Scholar
5 Morkoc, H., Drummond, T. J. and Stanchak, C. M., IEEE Trans. Electron Devices, ED–28, 1 (1981).CrossRefGoogle Scholar
6 Vossen, J.L., J. Vac. Sci. Technol., 8, S12 (1971).Google Scholar
7 Ohwaki, T. and Taga, Y., Appl. Phys. Lett., 59, 420 (1991).Google Scholar
8 Koren, U., Miller, B.I., Koch, T.L., Boyd, G.D., Capik, R.J., and Soccolich, C.E., Appl. Phys. Lett., 49, 1602 (1986).Google Scholar