Hostname: page-component-848d4c4894-v5vhk Total loading time: 0 Render date: 2024-06-27T17:20:57.675Z Has data issue: false hasContentIssue false
  • English
  • Français

Reduced Time for Uniform Etching of Cu Power Planes during FIB Editing

Published online by Cambridge University Press:  01 February 2011

V.V. Makarov ,
W.B. Thompson  and
T.R. Lundquist
V.V. Makarov
Affiliation:
NPTest, Inc, 150 Baytech Drive San Jose, CA 95134, USA
W.B. Thompson
Affiliation:
NPTest, Inc, 150 Baytech Drive San Jose, CA 95134, USA
T.R. Lundquist
Affiliation:
NPTest, Inc, 150 Baytech Drive San Jose, CA 95134, USA
Get access

Abstract

Dry etching of Cu challenges the Focused Ion Beam (FIB) removal of metallizations. Cu metallizations are comprised of numerous, randomly orientated crystallites. Each orientation shows a different etch rate under ion bombardment, leading to unacceptable damage to underlying dielectric. An improved methodology for uniform Cu etching over dielectric consists of three steps: 1) Exposure, 2) Initial off-normal bombardment and 3) Chemistry assisted ion bombardment. Comparison is made with and without preliminary off-normal bombardment. It is shown that Cu etching preceded by off-normal bombardment was completed ∼50% sooner with decreased dielectric over-etch.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 766: Symposium E – Materials, Technology and Reliability for Advanced Interconnects and Low-k Dielectrics - 2003 , 2003 , E3.10
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Phillips, J.R., Griffis, D.P., Russell, P.E., J.Vac.Sci.Technol. A 18 (2000) 1061.Google Scholar
[2] Herschbien, S. et al. , Proc ISTFA (1998) 127 Google Scholar
[3] Makarov, V.V. et al. , Proc 3rd Inter Conf Miroelectronics & Interfaces (2002) 115.Google Scholar
[4] Wang, L., Keckley, D, Bui, D, Rev Sci Instru 69 (1998) 91.Google Scholar
[5] Robinson, M.T., in “Sputtering by Particle Bombardment I”, ed. Behrish, R., Springer-Verlag, Berlin (1981) 99.Google Scholar