Hostname: page-component-7c8c6479df-ws8qp Total loading time: 0 Render date: 2024-03-28T11:53:33.565Z Has data issue: false hasContentIssue false

Recrystallization of Amorphous or Nanocrystalline NdBa2Cu3O7−x and GdBa2Cu3O7−x

Published online by Cambridge University Press:  26 February 2011

T. J. Folkerts
Affiliation:
Institute for Physical Research and Technology, Iowa State Univ., Ames, IA
S. I. Yoo
Affiliation:
Ames Laboratory, Iowa State University, Ames, IA
Youwen Xu
Affiliation:
Institute for Physical Research and Technology, Iowa State Univ., Ames, IA
M. J. Kramer
Affiliation:
Institute for Physical Research and Technology, Iowa State Univ., Ames, IA
K. W. Dennis
Affiliation:
Ames Laboratory, Iowa State University, Ames, IA
R. W. Mccallum
Affiliation:
Institute for Physical Research and Technology, Iowa State Univ., Ames, IA Ames Laboratory, Iowa State University, Ames, IA
Get access

Abstract

Using a novel melt-spinning technique, we have produced highly disordered NdBa2Cu3O7−x and GdBa2Cu3Oy−x materials. Samples which were melt-spun in an O2 environment consist of nanocrystals with the tetragonal REBa2Cu3O7−x structure: samples which were processed in an N2 environment consist of an amorphous matrix with small amounts of crystalline BaCu2O2, as shown by x-ray diffraction and electron microscopy. High temperature XRD studies indicate that the BaCu2O2 is eliminated during heating to 500°C in O2 and that the REBa2Cu3O7−x Phase recrystallizes directly from the amorphous matrix at temperatures below 800°C. Preliminary magnetization measurements show that higher temperature heat treatments are needed to restore superconductivity.

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Yoshimura, M., Sung, T. H., Nokagawa, Z., and Nakamura, T., Jap. J. Appl. Phys., 27, 11877 (1988).Google Scholar
2. Gao, W., Li, S. C., Rudman, D. A., Yurek, G. J., and Vander Sante, J. B., Physica C, 161, 75 (1989)Google Scholar
3. Halder, R., Lu, Y. Z., and Giessen, B., Appl. Phys. Lett., 51, 538 (1987)Google Scholar
4. Matsuzaki, K., Inoue, A., Kimura, H., Moroishi, K., and Matsumoto, T., Jap. J. Appl. Phys., 26, L1310 (1987)Google Scholar
5. Folkerts, T. J., Kramer, M. J., Dennis, K. W., and McCallum, R. W., J. Mater. Res., 6, 2035 (1991)Google Scholar
6. Zhang, K., Dabrowski, B., Segre, C. U., Hinks, D. G., Schuller, I. K., Jorgensen, J. D., and Slaski, M., J. Phys. C, 20, L935.Google Scholar