Hostname: page-component-7c8c6479df-8mjnm Total loading time: 0 Render date: 2024-03-29T09:08:43.526Z Has data issue: false hasContentIssue false

Rapid Thermal Transformation of A-15 Crystal Structure Metallic Thin Films

Published online by Cambridge University Press:  15 February 2011

M. J. O'Keefe
Affiliation:
Wright Laboratory, Solid State Electronics Directorate, Wright-Patterson AFB, OH 45433–7319
C. L. Cerny
Affiliation:
Wright Laboratory, Solid State Electronics Directorate, Wright-Patterson AFB, OH 45433–7319
Get access

Abstract

Physical vapor deposition of Group VI elements (Cr, Mo, W) can lead to the formation of a metastable A-15 crystal structure under certain processing conditions. Typically, a thermally induced transformation of the metastable A-15 structure into the equilibrium body centered cubic structure has been accomplished by conventional furnace annealing at T/Tm ≈ 0.3 from tens of minutes to several hours. In this study we report on the use of rapid thermal annealing to transform sputter deposited A- 15 crystal structure tungsten and chromium thin films into body centered cubic films within the same temperature range but at times on the order of one minute. The minimum annealing times and temperatures required for complete transformation of the A-15 phase into the BCC phase varied from sample to sample, indicating that the transformation was dependent on the film characteristics. The electrical resistivity of A-15 Cr and W films was measured before and after rapid thermal annealing and was found to significantly decrease after transformation into the body center cubic phase.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. O'Keefe, M. J., Horiuchi, S., Rigsbee, J. M. and Chu, J. P., Thin Solid Films 247, 169 (1994).Google Scholar
2. Saito, Y., Yatsuya, S., Mihama, K. and Uyeda, R., J. Cryst. Growth 45, 501 (1978).Google Scholar
3. Weerasekera, I. A., Shah, S. I., Baxter, D. V. and Unruh, K. M., Appl. Phys. Lett. 64, 3231 (1994).Google Scholar
4. Arita, M. and Nishida, I., Jpn. J. Appl. Phys. 32, 1759 (1993).Google Scholar
5. Kimoto, K. and Nishida, I., J. Phys. Soc. Jpn. 22, 744 (1967).Google Scholar
6. Morcom, W. R., Worrell, W. L., Sell, H. G. and Kaplan, H. I., Met. Trans. 5, 155 (1974).Google Scholar
7. Petroff, P., Sheng, T. T., Sinha, A. K., Rozgonyi, G. A. and Alexander, F. B., J. Appl. Phys. 44, 2545 (1973).Google Scholar
8. O'Keefe, M. J., Grant, J. T. and Solomon, J. S., J. Elect. Mat. (accepted).Google Scholar