Hostname: page-component-76fb5796d-wq484 Total loading time: 0 Render date: 2024-04-25T16:24:48.011Z Has data issue: false hasContentIssue false
  • English
  • Français

Pulsed DC Sputtered Aluminum Nitride: A Novel Approach To Control Stress And C-axis Orientation

Published online by Cambridge University Press:  01 February 2011

Philippe Soussan ,
Kathy O'Donnell ,
Jan D'Haen ,
Geert Vanhoyland ,
Eric Beyne  and
Harrie A. C. Tilmans
Philippe Soussan
Affiliation:
IMEC, divison MCP, Kapeldreef 75, B-3001 Leuven, Belgium
Kathy O'Donnell
Affiliation:
NEXX Systems, Billerica, MA 01821–3904, USA
Jan D'Haen
Affiliation:
IMEC, division IMOMEC, Wetenschapspark 1, B-3590 Diepenbeek, Belgium
Geert Vanhoyland
Affiliation:
Postdoctoral Fellow of the Research Foundation – Flanders (FWO-Vlaanderen).
Eric Beyne
Affiliation:
Laboratory of Inorganic and Physical Chemistry, IMO, Limburgs Universitair Centrum, B-3590, Diepenbeek, Belgium
Harrie A. C. Tilmans
Affiliation:
Laboratory of Inorganic and Physical Chemistry, IMO, Limburgs Universitair Centrum, B-3590, Diepenbeek, Belgium
Get access

Abstract

This paper reports on a novel low temperature sputter deposition of AlN on an Al substrate, yielding films with stresses and crystalline orientation comparable to those of films deposited on Pt. The study focuses on the importance of the initial film growth step on both the stress and crystalline orientation of the film. The AlN layer is deposited using Pulsed DC (250 kHz, 90% duty cycle) magnetron reactive sputtering (93% N2, 7% Ar) using an Al target. The substrates are 150mm Si wafers with an aluminum seed layer (100 nm). The thickness of the AlN films is ≈2.5μm with uniformity across the wafer of 0.4%. The films were deposited in 4 passes of 0.625μm each to avoid overheating of the substrate. The influence of the substrate bias (0 V, 80 V and 120V) and argon pre-sputtering of the aluminum substrate been investigated. The film stress, and to a smaller extent the crystalline orientation, were mainly driven by the properties of the film deposited during the first pass. The bias is useful at the beginning of the film growth for stress control. This study suggests that it is beneficial not to use bias during the entire film deposition. With this approach, it was possible to deposit c-axis oriented AlN layers on Al with a FWHM of the rocking curve of 1.63° and low stress (<300MPa).

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 833: Symposium G – Materials, Integration, and Packaging Issues for High-Frequency Devices II , 2004 , G2.2
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Iborra, E., Olivares, J., clement, M., Vergara, L., Sanz-Hervas, a., Sangrador, J., Sensors and actuators, A 115, p501, 2004 Google Scholar
2. Lobl, H. P., Klee, M., Wunnicke, O., Kiewitt, R., Dekker, R., Pelt, E. V., IEEE ultrasonics symposium, p1031, 1999 Google Scholar
3. Okano, H., Tanaka, N., Takahashi, Y., Tanak, T., Shibata, K., Nakano, S., Appl. Phys. Lett., 64(2), 1994 Google Scholar
4. Dubois, M.-A. and Muralt, P., J. Appl. Phys., 89(11), p6389, 2001 Google Scholar
5. Engelmark, F., Fuentes, G., Katardjiev, I. V., Harsta, A., Smith, U., Berg, S., J. Vac. Sci. Technol. A18(4), p1609, 2000.Google Scholar
6. Martin, F. and Muralt, P., Dubois, M.-A., Pezous, A., J. Vac. Sci. Technol. A22(2), 361, 2004.Google Scholar
7. Naik, R.S, Reif, R., Lutsky, J. J., Sodini, C. G., J. of the Electro Soc, 146(2), 691, 1999 Google Scholar
8. Iarte, G. F., Bjurstroom, J., Westlinder, J., Engelmark, F., Katardjiev, I.V., IEEE ultrasonics symposium, p311, 2002 Google Scholar
9. Carlotti, G., Hickernell, F. S., Liaw, H. M., Socino, G., Verona, E., IEEE ultrasonics symposium, p353, 1995 Google Scholar
10. Cheng, H., Sun, Y., Hing, P., Thin solid films, 434, p112, 2003 Google Scholar
11. Iborra, E., Clement, M., Sangrador, J., Sanz-Hervas, A., Navarro, A. J., Aguilar, M., IEEE ultrasonics symposium, p411, 2002 Google Scholar
12. Iarte, G. F., Engelmark, F., Ottoson, M., Katardjiev, I. V., J. Mater. Res, 18 (2), p423, 2003 Google Scholar
13. Clement, M., Iborra, E., Sangrador, J., Sanz-Hervas, A., Vergara, L., Aguilar, M., J. Appl. Phys., 94(3), p1495, 2003 Google Scholar