Hostname: page-component-848d4c4894-m9kch Total loading time: 0 Render date: 2024-05-17T02:36:09.809Z Has data issue: false hasContentIssue false
  • English
  • Français

Properties of A New Liquid Organo Gold Compound for MOCVD

Published online by Cambridge University Press:  22 February 2011

Hiroto Uchida ,
Norimichi Saitou ,
Masamitu Satou ,
Masayuki Tebakari  and
Katsumi Ogi
Hiroto Uchida
Affiliation:
Mitsubishi Materials Corporation, Central Research Institute, 1-297 Kitabukuro-cho, Omiya, Saitama 330, Japan
Norimichi Saitou
Affiliation:
Mitsubishi Materials Corporation, Central Research Institute, 1-297 Kitabukuro-cho, Omiya, Saitama 330, Japan
Masamitu Satou
Affiliation:
Mitsubishi Materials Corporation, Central Research Institute, 1-297 Kitabukuro-cho, Omiya, Saitama 330, Japan
Masayuki Tebakari
Affiliation:
Mitsubishi Materials Corporation, Central Research Institute, 1-297 Kitabukuro-cho, Omiya, Saitama 330, Japan
Katsumi Ogi
Affiliation:
Mitsubishi Materials Corporation, Central Research Institute, 1-297 Kitabukuro-cho, Omiya, Saitama 330, Japan
Get access

Abstract

Dimethyl(1,1,1,5,5,5-hexafluoroaminopenten-2-onato)Au(III), DMAu(hfap) was found to be very promising compound for CVD Au wiring. It is liquid at r.t. and has high vapor pressure (0.5 Torr at r.t.) and high thermal stability (dec.t. 171°C, δE=25.4Kcal/mol) and can be used as a precursor for MOCVD. CVD gold films were grown on Si(100) from DMAu(hfap) in a quartz vacuum chamber, using thermal activation by an electric heater or photo activation through quartz windows by excimer lasers(XeC1 308nm). A growth rate of 10 nm/min was achieved by thermal activation at 250 °C, (evaporation temperature of 30 °C, H2 flow rate at 100 sccm and chamber pressure of 30 Torr). Resistivities ranged between 2.8 and 5.lμΩ-cm, depending on the film morphology. The growth rate of laser CVD gold films had the tendency of increasing with decreasing the substrate temperature. This phenomenon indicates that photolysis of adsorbed species on the substrate plays an important role in film growth by laser CVD.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 334: Symposium W – Gas-Phase and Surface Chemistry in Electronic Materials Processing , 1993 , 293
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1) Larson, C.E., Baum, T.H. and Jackson, R.L., J. Electrochem. Soc. 134, 226 (1987).CrossRefGoogle Scholar
2) Baum, T.H. and Jones, C.R., Appl. Phys. Lett. 47, 538 (1985).Google Scholar
3) Holloway, K., Zuhoski, S.P., Reynolds, S. and Matuszewski, C., Mat. Res. Soc. Symp. Proc. 204, 409–414 (1991).Google Scholar
4) Hoshino, M., Kasai, K. and Komeno, J., Jpn. J. Appl. Phys. 31, 4403–4406 (1992).CrossRefGoogle Scholar
5) Semyannikov, P.P., Zharkova, G.I., Grankin, V.M., Tyukalevskaya, N.M., Igumenov, I.K., Metalloorg. Khim. 1(5), 1105–12 (1988).Google Scholar
6) Kissinger, H.E., J. Res. Natul. Bul. Std. 57, 217 (1956).Google Scholar